January 2024 – A Brief History of the Bass Guitar

Prelude

WELCOME FAIR MUSIC‑MINDED PATRONS to the first CRAVE Guitars’ monthly article of the New Year. While we may be less than a full month into the year Two Thousand and Twenty Four of the Common Era, one hopes it is off to a good start despite global uncertainty (and insanity). Let us hope that those intent on geopolitical conflict come to their senses, unlikely as it may seem, rather than escalate tensions further. I don’t know about you but I don’t want to be part of the doomsday generation. Scary.

Bellum omnium contra omnes (the war of all against all)” – Thomas Hobbes (1588‑1679)

Getting back to the musical point, ask pretty much anyone with a slight interest in modern music culture, the question, “Who invented the first bass guitar?” and I’m sure a lot of people would say, “Leo Fender, of course”. Well yes… and no. In the world of vintage guitars, things are rarely quite as straightforward as one may at first think.

With the recent addition of CRAVE Basses to the CRAVE Guitars, Amps and Effects family, this month seems perfectly apt to take a quick look at how the electric bass guitar as we know it came into being and how it has become such an integral component of contemporary music.

Primarily as a guitarist, my dalliances with bass guitars up to now have, I admit, been spawned out of curiosity and exploration, rather than a serious preoccupation. Those dalliances, though, span well over four decades, so the bass encounter isn’t a single, short or recent ‘event’.

We do not start the story, as many might imagine in the 1950s. We’ll come back to that in a little while. Before we get there, though, we should go back quite a few years. Many, many years in fact, starting with the classical orchestral double bass, originating from the 15th Century or thereabouts. Then we’ll explore the modern‑day innovations starting in the 1920s and 1930s before the ‘big bang’ that really exploded in the 1950s and 1960s. Finally we’ll come up‑to‑date, with a look at the instruments, equipment, artists and sounds that have helped to shape the modern musical landscape. Finally, we’ll take a wee peak into the near future of bass instruments.


The fretless acoustic double bass

Before the solid body fretted electric bass guitar, popular music relied almost totally on the acoustic upright double bass for low frequency impact. The instrument’s origins date approximately to the 15th‑16th Century in Venice, Italy. Venetian musician, Silvestro Ganassi developed a ‘bass viola da gamba’ in 1542, widely regarded as the forerunner of today’s double bass. It wasn’t until around 1700, though, that the double bass became part of the opera orchestra. The double bass as we now know it is the largest and lowest‑pitched chordophone in the classical music orchestra.

As a quick recap, defined by the Hornbostel‑Sachs system of musical instrument classification, a chordophone is a musical instrument that makes sound from vibrating one or more taught strings by bowing, plucking or striking the strings. Examples of chordophone types include violins, guitars, and pianos respectively. The word chordophone stems from the Greek words for string (chordē) and sound (phonē).

For more on the historical origins of musical instrument classification (to provide a context for the development of the guitar), see CRAVE Guitars’ March 2018 article.

A Potted History of the Guitar Part I (The ancient world up to the early Renaissance):
March 2018 – A Potted History of the Guitar Part I (craveguitars.co.uk)

The traditional 4‑string double bass is usually played in one of two ways, either by rubbing the strings with a bow (arco) or by plucking the strings with fingers (pizzicato). Some modern double bass players, for instance in rock & roll and rockabilly, also use a distinctive ‘slap’ technique. This percussive sound derived from the ‘Bartók pizzicato’ (‘snap’ pizzicato) named after the Hungarian composer and pianist Béla Bartók.

Double Bass (courtesy of Roxanne Minnish)

Depending on the style of music, the double bass is also known by a number of other names, all of which refer to the same instrument. Some of these alternative monikers include bass, upright bass, string bass, acoustic bass, acoustic string bass, contrabass, contrabass viol, bass viol, bass violin, stand‑up bass, bull fiddle, doghouse bass and bass fiddle.

The traditional double bass is a large acoustic fretless instrument of the violin family that is played upright. The deep, resonant, woody tone of the double bass endows it with a very different sound when compared to the modern solid body fretted electric bass guitar. The tuning of the double bass is different from other members of the orchestral sting instruments, in that it is tuned in fourths (E‑A‑D‑G) rather than a violin’s fifths (G‑D‑A‑E). The double bass, then, is tuned the same as a modern bass guitar, an octave below the bottom four strings of a 6‑string guitar in standard tuning. This particular characteristic aided the bass’s transition from classical to modern day musical styles.

Originally, double basses were more likely to have three strings until four strings became commonplace by the 19th Century, by which time the standard format and construction of the double bass had become established. There are, however, 5 and 6 (or more) string variants and there are also various alternative tunings.

The double bass has been the mainstay of orchestral string sections and chamber music for several centuries in one form or another. It was predictable that, with the emergence and evolution of the major modern popular music genres, such as jazz, blues and country & western that the double bass would become the go‑to bass instrument, at least up until the 1960s when the solid body fretted electric bass guitar became predominant. However, the double bass hasn’t disappeared from contemporary music completely. Plenty of present‑day artists still use or revert back to the double bass for authenticity and/or effect.

The main drawback experienced by many players is that the double bass is a substantial piece of equipment. The full‑size double bass is almost 75 inches (190cm) tall, weighing in at c.20‑25lbs (9‑11½kg), without its hefty case. The scale length is set at around 42” (107cm), much longer than most modern bass guitars. Given these dimensions, the double bass is sizeable, cumbersome, unwieldy and plain heavy, making it far from the easiest of instruments to move around or play. There are smaller double basses including ¾, ½ and ¼ size, mainly aimed at younger players. Even so, the double bass not for the faint hearted, as the smallest ¼ size instrument is still over 61” (156cm) tall.

Another drawback is the double bass’s acoustic construction. Like the acoustic guitar, in the first half of the 20th Century, the acoustic double bass’s lack of volume made it hard to be heard in a jazz‑era big band mix unless there was some form of electrification through either a magnetic pickup or a microphone connected to an amplifier and, even then, acoustic instruments can be prone to feedback in high sound pressure level environments.

Traditional double basses are not only large but, because of their construction, they are also quite expensive, making them a major investment and therefore difficult for novices or younger players to access and learn.

Even so, despite its limitations, during the 20th Century the double bass became widely used in a diverse range of modern music genres, including jazz, blues, swing, rock & roll, rockabilly, country & western, bluegrass, folk, funk, reggae, metal, rock, pop, tango and visual media soundtracks.

Trivia: Believe it or not, there is an even larger bass, first built c.1850 by the French luthier Jean‑Baptiste Vuillaume (1798‑1875) in Paris. The octobass, as it is called, has three strings and is basically a larger version of the double bass tuned a further octave down. The octobass is a truly gargantuan beast, approximately 137” high (348cm).


The electric upright bass

To enable modern players to experience the spirit of the acoustic double bass in a more convenient and amplified form, there is the modern Electric Upright Bass (EUB), which is also played, as its name suggests, upright, like a traditional double bass.

EUBs allow for greater portability while retaining the playing style and general sound of its forebear. As the EUB doesn’t require the substantial acoustic resonating chamber of a double bass, they often feature a ‘skeleton’ body, making it much smaller, lighter and cheaper to produce. The minimal structure may have either a solid body or a small acoustic body.

A magnetic, piezo or condenser bass pickup provides the means to route the signal via a bass amplifier to loudspeakers. Like a double bass, the EUB’s strings can be bowed or plucked, although that is dependent on fingerboard and bridge radius. While evoking its acoustic origins, the structural and electric characteristics of the EUB endow it with a unique sound all of its own.

As the EUB’s construction isn’t bound by convention like its orchestral sibling, the flexible format allows for a range of scale lengths to be employed from around 30” (76cm), through 34” (86cm) like a long scale bass guitar to the full 42” (107cm) of a double bass, making it much more accessible to a range of players. Almost all EUB necks allow for a full two‑octave range and most but not all are fretless. Compared to the double bass or the electric bass guitar, the electric upright bass tends to be a modern, notable but relatively niche instrument. There are EUB models at all price points, making it easier for novices and experienced players alike.

The first production electric upright basses were developed independently in the mid‑1930s by Regal (Electrified Double Bass), Vega (Electric Bass Viol), Rickenbacker (Electro Bass‑Viol) and Audiovox (bull fiddle – see below). Gibson introduced their special order Electric Bass Guitar in 1938, which was still an upright fretless instrument with a hollow body and a magnetic pickup.

Manufacturers of electric upright basses include Framus, Ampeg, Warwick, Ibanez, Yamaha, Palatino, NS Design (Ned Steinberger), and Harley Benton.

Electric Upright Bass

The first solid‑body fretted electric bass guitar

As hinted at above, while Leo Fender was the major innovator associated with the solid‑body fretted electric bass guitar, he wasn’t the first. He was beaten to the starting post by at least some 15 years. Hardly a photo finish!

The first indication of the possible future of a bass guitar was in 1924 when the legendary Gibson designer, Lloyd Loar came up with a prototype electric bass. The Loar concept focused on the body, pickup and strings but with little additional detail. Loar’s radical design was rejected by Gibson management at the time. Loar left Gibson shortly thereafter in 1924, so his visionary ideas for an electric bass guitar went no further.

Nearly a decade later, around 1933, American musician and inventor Paul H. ‘Bud’ Tutmarc (1896‑1972), based in Seattle, Washington, began experimenting with reducing the size of the double bass to a more manageable instrument. Tutmarc originally devised an electrified fretless double bass‑style instrument described as an electric 4‑string upright ‘bull fiddle’, slightly smaller than a cello.

It’s worth a quick diversion to go back in time to take in an original report from the ‘Seattle Post‑Intelligencer’ newspaper, which published the story on 17 February 1935. The headline read, “Pity Him No More – New Type Bull Fiddle Devised.”

The article went on to state that, “People have always pitied the poor bass-fiddler… who has to lug his big bull-fiddle home through the dark streets after the theatre closes. But he doesn’t have to do it anymore. Because Paul Tutmarc, Seattle music teacher and KOMO radio artist, has invented an electric bull-fiddle. One you can carry under your arm. And it doesn’t even need a bow, either. You pluck a string – and out of the electric amplifier comes a rich, deep tone, sustained as if five or six bass violinists were bowing five or six bass‑violins with masterly artistry. The tone is sustained as long as you want it, too, without a bow.” The instrument described in the article was a cello‑like upright fretless instrument with an electromagnetic pickup.

Tutmarc was, however, about to do something far more radical. By 1935-1936, Tutmarc, had changed direction and developed the first solid body fretted electric bass guitar, pretty much recognisable in its modern form. It was this version of Tutmarc’s bass that was intended to be played horizontally, rather than upright, in a similar way to the modern bass guitar. The 1935 sales catalogue for Tutmarc’s company Audiovox featured his ‘Model 736 Bass Fiddle’, a solid‑bodied electric bass guitar with four strings, a fretted neck, with a 30½” (775mm) scale length, an ebony (or purpleheart) fingerboard with 16 frets, a black walnut body, a hidden single Tutmarc‑Stimpson horseshoe pickup below a mirror-steel faceplate, and a single volume control.

Tutmarc AudioVox Model 736

In addition, as an electric bass guitar would be pretty much useless without the means to amplify the sound, Audiovox also sold an accompanying ‘Model 936’ bass amplifier with 18 watts of power and a 12” Jensen Concert speaker.

Around 100 of the Model 736 Audiovox bass guitars were made in the mid‑1930s. However, there are only thought to be three Model 736 Tutmarc bass guitars still in existence today, making them remarkably rare. One belongs to the Experience Music Project (EMP), now known as The Museum of Pop Culture (MoPOP), a non‑profit enterprise founded by Microsoft co‑founder Paul Allen in 2000 and based in Seattle, Washington state, USA. In 2018, a 1936 Audiovox Model 736 bass guitar was reportedly sold by Tutmarc’s grandson on eBay for $23,850.

Sadly, for Tutmarc, the Audiovox 736 was not a commercial success. The price tag was high for the mid‑1930s, in a country still severely affected by The Great Depression (1929‑1939). The 736 bass fiddle originally cost $65 and the matching 936 bass amplifier cost $75, placing it well out of reach for many musicians. The high price and the radical concept didn’t attract enough musicians at the time and it wasn’t long before it was discontinued and was subsequently forlornly forgotten to history. Tutmarc’s company, Audiovox folded in 1950.

It can well be argued that Tutmarc was ahead of his time. Perhaps it is a case of supply looking for a demand that consumers didn’t know they needed. Maybe it was bad timing and/or bad luck. The Model 736 also arrived shortly before the outbreak of World War II when the guitar manufacturing industry was deemed ‘non‑essential’ and resources were diverted to the American war effort. Furthermore, a bass guitar didn’t seem to fit seamlessly into any of the prevailing musical styles at that time.

It is surprising, though, that such a significant innovation in guitar history isn’t more widely known about. Perhaps it is time, nay overdue, for Tutmarc’s milestone achievements to be deservedly recognised.

One company, Luthiery Laboratories, makes modern‑day replicas of the Audiovox 736, keeping the spirit of the original instrument alive.

Audiovox 736 Bass (1/4) ~ Luthiery Laboratories (luthierylabs.com)


The first commercially successful mass produced solid body fretted electric bass guitar

And so it was that the scene was set for someone else to step in and make the bass guitar ‘a thing’. That someone else was Clarence Leonidas Fender (1909‑1991). Unlike poor old Paul H. Tutmarc, you may just have heard of him.

“I wonder if I could make an electric bass” – Leo Fender (1909‑1991)

For more on the history and development of Fender guitars and musical equipment, see CRAVE Guitars’ August 2018 article for the context behind Fender solid body electric guitars.

A Potted History of the Guitar Part VI (1950s and 1960s):
August 2018 – A Potted History of the Guitar Part VI (craveguitars.co.uk)

Once the proverbial ball started rolling, the bass guitar had a phenomenal, transformative and relatively rapid impact on modern music that cannot be underestimated or understated. It is also very easy to take the electric bass guitar’s presence on stages, in studios and bedrooms all around the world for granted. Back in 1950, though, no‑one other than a select few in Fullerton, California had any idea of what was to come.

So… what are we actually talking about? The answer, after the lengthy preamble (apologies for keeping you on tenterhooks for so long), is the mighty Fender Precision Bass. Three little words. Game changing, era defining and well‑deserving of all the hyperbole attached to it over the past seven‑plus decades. So much has been written about the Precision that there is little need to dredge up the detail again, so what follows is a brief overview.

Leo Fender was working on a prototype back in 1950, bringing the world’s first commercially successful mass‑produced electric bass guitar to market in 1951. Fender designed the Precision Bass (often shortened these days to P‑Bass) to overcome the many drawbacks of the acoustic double bass alluded to earlier in this article. Even the name, Precision, referred to the fretted neck to enable musicians to play in tune far more precisely than on the double bass’s fretless neck. Conservative double bass players may well have looked at the Precision Bass in the same way that conservative guitarists looked at the Fender Telecaster, which had been introduced a year earlier in 1950. Consternation and indignation were probably natural initial reactions from the ‘old‑school’.

At its most basic, the Fender Precision Bass is a solid body, 4‑string bass guitar equipped with a single pickup and a one‑piece 20‑fret maple neck with rosewood or maple fingerboard. It all sounds so very straightforward and unremarkable nowadays doesn’t it?

The Precision Bass didn’t, however, appear fully formed. The original design of the Precision borrowed several design features from the Telecaster guitar, other than the double cutaway body. Initial models carried one single coil pickup, a slab body, large scratchplate and a Tele‑like headstock.

After Fender introduced the Stratocaster guitar in 1954, some of its design features were brought over to the Precision including a contoured body and a Strat‑like headstock. The original pickup was replaced with a single split coil hum cancelling staggered design and a sleeker redesigned scratchplate. It is this version of the Precision from 1957 that has stayed in production largely unchanged to the current day. There have been many, many variants with numerous changes in specification over the years, including a fretless version (ironically, given the origin and intention of the Precision’s name). 5‑string versions, 22‑fret necks, active electronics, multiple pickups, etc. followed.

The original pre‑1957 Precision design has been re-issued by Fender at times over the years, often called the Telecaster Bass to differentiate it from the post‑1957 Precision specification.

The popularity of the Fender Precision Bass grew significantly throughout the 1950s especially with rock & roll and country fraternities, as well as with session musicians. During the 1960s the solid body fretted electric bass guitar became dominant in most modern musical genres. During the early days, there wasn’t a great deal of choice in terms of alternatives to the Precision but that was to change later on.

1977 Fender Precision Fretless Bass

Fender capitalised on their supremacy by introducing the solid body fretted electric Fender Jazz Bass in 1960 (originally called the ‘Deluxe Model’). The svelte Fender Jazz Bass (often now shortened to J‑Bass) was designed to appeal to a different customer base. Like the offset bodied Fender Jazzmaster guitar, it was aimed squarely at the dyed‑in‑the‑wool jazz community. However, like the Jazzmaster, the Jazz Bass’s appeal spread far wider than jazz musicians. Like the Precision, the Jazz Bass has rightly become an iconic industry standard solid body electric bass guitar.

Throughout the years, both the Precision and Jazz Bass have featured sizeable chrome covers over the pickup and the bridge, despite these items limiting playing techniques such as palm muting the strings. As the covers are purely aesthetic, rather than functional components, it is fair to say that the vast majority of musicians removed these covers permanently.

Without doubt, the Fender Precision Bass and its younger sibling the Jazz Bass are icons of contemporary music and remain hugely popular today. Consumers can purchase genuine P‑Bass and J‑Bass models from the budget Fender‑owned offshore‑produced Squier brand, through Mexican and American‑made Fender models, to the high‑end Fender Custom Shop versions. Throughout the decades, the Precision and Jazz Bass models have oft been imitated and/or blatantly copied by other manufacturers, eager to cash in on Fender’s industry‑dominant status.

Understandably, over the years, the Precision and Jazz Bass have become highly collectable, especially the earliest models. The highest vintage market prices undoubtedly belong to the models from 1951 (Precision) and 1960 (Jazz Bass) to 1965, when Leo Fender sold his company to industry giant CBS. Fender equipment from this period is known as ‘pre‑CBS’.

For more information on the Fender Precision and Jazz Bass, just complete any Internet browser search and, alongside a great deal of drivel, there is a massive volume of fact and opinion available, often described in forensic detail.

1989 Fender Jazz Bass American Standard Longhorn

Evolution of the electric bass guitar

It is probably fair to say that, since 1951 and the introduction of the Fender Precision Bass, other brands were in the position of having to play catch up. In particular, Fender’s biggest competitor, Gibson, was wrong‑footed and they have never been able to compete on a level playing field. In 1953, Gibson released the EB‑1, which was a violin‑shaped solid mahogany body bass with a set neck. The EB‑1 didn’t catch on and was replaced by the semi‑acoustic ES‑335‑shaped EB‑2 in 1958, the SG‑shaped Gibson EB‑0 in 1959 and the EB‑3 (made famous by Jack Bruce of Cream) in 1961. While the semi‑acoustic EB‑2 proved popular, its Epiphone‑branded counterpart, the Epiphone Rivoli proved more successful. All these early Gibson basses used a shorter 30½” scale. In 1959, Gibson also released a hollow body EB‑6 6‑string bass.

Possibly Gibson’s best contender for an iconic bass guitar is the Gibson Thunderbird, originally introduced in 1963. The Thunderbird was based on Gibson’s Firebird guitar, designed by legendary American car designer Raymond Dietrich (1894‑1980). The Thunderbird was the first Gibson solid body bass to use the 34” scale made popular by Fender. Like the Firebird, the Thunderbird was redesigned in a simpler ‘non‑reverse’ form for 1966 and the original ‘reverse’ shape wasn’t reissued until the mid‑1970s. During the 1970s, Gibson also released the Ripper and Grabber basses but neither really captured bass players’ imaginations (or their precious dollars!). Later additions like the Gibson Triumph, Victory and RD basses didn’t fare much better as viable competition for Fender’s stalwarts. Epiphone have Thunderbird and EB basses in their line‑up alongside Epiphone‑specific basses such as the Newport and the Embassy.

Over at Danelectro in Neptune, New Jersey, Nathan Daniel launched the world’s first 6‑string bass, the UB‑2 in 1956 comprising a single cutaway semi‑hollow bass with a 30” scale, 24 frets and dual single coil pickups, earning its nickname the ‘Tic Tac bass’. In 1958, Danelectro replaced the UB‑2 with two new 6‑string bass models. The first was the Long Horn 4623 bass with a radical new lyre‑like design 24 frets, and a short 25” scale. The other was the Short Horn 3612 with stubby double cutaways, 29½”scale and only 15 frets. All Danelectro models substantially undercut the retail prices of both Fender and Gibson’s basses. The 6‑string models seemed to attract guitarists rather than bass players to their designs, providing a novel bridge between guitar and bass camps.

It should be noted at this point that older 6‑string basses are generally tuned an octave below a guitar in standard tuning, to E-E, while the baritone guitars that were appearing at the time were tuned either to B‑B or A‑A. On the other hand, modern 5‑string basses simply add a lower B string while modern 6‑string basses tend to add lower B and higher C strings compared to an equivalent 4‑string bass. Confused?

Meanwhile, back in the 1960s, Fender weren’t resting on their laurels. Following the popularity of the ‘student’ Mustang guitar, Fender introduced the short scale Mustang Bass in 1966. The Mustang Bass spawned two later variants, the Bronco Bass (introduced in 1967) and the Musicmaster Bass (introduced in 1971). Fender also released two esoteric ‘bass’ guitars, the Fender Bass V (introduced in 1965), which was the world’s first 5‑string bass guitar and the 6‑string Bass VI (introduced in 1961). The latter was strongly influenced by the Fender Jaguar guitar design. The Bass VI was Fender’s upmarket response to the Danelectro 6‑string bass introduced 5 years earlier. The Bass VI is unique in having 3 pickups, 6 lighter gauge strings, a short 30” scale, a floating bridge and a mechanical vibrato as used on the Jazzmaster/Jaguar guitars, as well as a removable string mute. To compete with the Gibson EB‑2 and Epiphone Rivoli thinline semi‑acoustic basses, Fender introduced the hollow Coronado Bass in 1966.

In addition, the ‘other’ Californian company, Rickenbacker, run by F.C. Hall at the time, also wasn’t going to be left on the side‑lines in the bass department. Rickenbacker had hired Roger Rossmeisl (1927‑1979) who designed the brand’s key guitars and the 4000 series basses. The Rickenbacker 4000 bass with its distinctive cresting wave body outline and thru‑neck construction was launched in 1957. Subsequent models were named 4001, 4002, 4003, 4004, all being variants of the same basic instrument. There isn’t enough space to go into the specification differences here.

Rickenbacker 4001

A decade after Leo Fender left the company that still carries his name today, Music Man was formed in California and released Leo Fender’s vision for the next evolution of his era defining bass guitars. The Music Man Stingray Bass was released in 1976 with a single large bridge humbucker, distinctive 3+1 headstock, innovative on‑board active electronics and an integral string mute. While Music Man’s guitars never caught on at the time, the Stingray Bass has joined Fender and Rickenbacker as an iconic design for many bass musicians. The Stingray Bass was especially popular for funk slap‑style bass technique for the likes of Louis Johnson of the Brothers Johnson.

1978 Music Man Stingray Bass

There are a few other notable basses, such as the German Höfner ‘violin bass’, the 500/1, made famous by Paul McCartney of The Beatles. This model, introduced in 1955, with its carved solid spruce top and humbucking pickups, is often nicknamed the ‘Beatle Bass’. Beyond the Beatles connection, though, the 500/1 remains a relatively minor entry in the bass stakes, while the company’s only other notable entry being the Höfner Club and Verythin basses.

Another oddity to mention at this point is the Swedish Hagström H8, unique for being the world’s first mass‑produced 8‑string bass, with four pairs of strings on a short 30” scale. The H8 was only produced briefly from 1967‑1969.

Throughout the 1960s, 1970s and 1980s a plethora of other companies jumped on the bandwagon, eager to make the most of the massive increase in demand as rock, pop and other genres proliferated. Many of the basses produced during this time were flagrant facsimiles of the best‑selling American brand models, often by Japanese companies (now termed ‘lawsuit‑era’ copies). Other companies like Warwick in Germany were making their own headway with their successful original‑design Thumb and Streamer basses.

Today (2024), Fender arguably still rules the roost with basses covering all bases (sic!) from budget to elite models. All other brands stand firmly in Fender’s enviable shadow. While Fender may dominate, there are now plenty of alternative options. There are some incredible bass guitars out there, some of which are listed later in this article for those that want to diverge from the predictable industry standard ‘Fender sound’. There are numerous ways to deviate from the common path, with different brands, string/pickup configurations, electronics, scale lengths, body construction, etc. The quality of budget instruments is vastly superior to anything available in the past and provides a strong basis (again, sic!) for players seeking to learn and develop their skills.


The acoustic bass guitar

While the solid body electric bass guitar finally took the world by storm from the 1950s and 1960s, the acoustic bass guitar has proved to be another modern, notable and niche instrument. The first (largely unsuccessful) attempts at acoustic bass guitars began to appear in the 1950s as a logical extension to its electric counterpart.

Historically, one of the earliest acoustic bass‑like instruments was the Mexican guitarrón, which has its roots in the 16th Century and is widely used in Mexican Mariachi bands. While looking similar to a guitar, these huge instruments were either 6‑string or 12‑string acoustic instruments, tuned in A‑D‑G‑C‑E‑A.

In 1972, Ernie Ball introduced the Earthwood acoustic bass guitar, stating that “…if there were electric bass guitars to go with electric guitars then you ought to have acoustic basses to go with acoustic guitars.” A simple yet ‘blindingly obvious’ observation, given the benefit of hindsight. Ernie Ball took a guitarrón, being the nearest thing to an existing acoustic bass guitar, and created a more practical instrument for guitar‑centric American consumers. The Earthwood was relatively short‑lived but the foundation of the acoustic bass guitar was established. American company Washburn took the concept and created more successful instruments that coincided neatly with MTV’s Unplugged concert series (1989‑1999). Interestingly, despite starting it all, Ernie Ball does not have an acoustic bass guitar available to buy at the time of writing.

Acoustic bass guitar construction is essentially similar to the steel‑strung flat top acoustic folk guitar, with a larger hollow wooden body and a longer scale neck. Most acoustic basses have four strings, tuned in the same way as an electric bass, E‑A‑D‑G, an octave below a standard guitar. The majority of acoustic basses have fretted fingerboards, although some are fretless.

Acoustic Bass Guitar

Like many modern day acoustic guitars, many acoustic bass models have pickups to enable them to be amplified for stage use or DI’d for recording purposes. Some instruments are thinline electric semi‑acoustic basses while others are full‑depth electro‑acoustic basses. These are designed primarily as acoustic basses with an on‑board pickup for additional amplification when needed.

Today, there are any number of acoustic bass guitars on the market for every level of player and every price point from many key manufacturers including, amongst others; Martin, Taylor, Guild, Fender, Takamine, Ovation, Tanglewood, Epiphone, Warwick, Epiphone, Washburn, Godin, ESP, Breedlove, Larivée, Framus, Hohner, Ozark, Dean, D’Angelico, Ibanez, Sigma, Alvarez and Cort.


Bass guitar amplification

In the early days of bass guitars, brands released bass amplifiers to accompany their instruments, often sold as a package (see Tutmarc’s Audiovox above, for example). Other brands like Rickenbacker did the same in the early days. The main difference between guitar amps and bass amps is that the latter are tuned specifically to reproduce bass frequencies accurately. A standard 4‑string bass guitar produces low frequencies in the range 41Hz to 100Hz with overtones extending up to 4‑5kHz (not dissimilar to an acoustic double bass in fact).

In terms of sound pressure levels, bass frequencies need more power to be heard by the human ear/brain at the same volume as higher frequencies, so bass amps tend to have higher power ratings than guitar amps. In the past, speakers for bass also tended to be larger with 12”, 15” or even 18” to shift the amount of air needed at lower frequencies. In contrast, guitar speakers tended to be 10”or 12”. Bass speaker cabinets, especially those with multiple speakers, normally had sealed or ported enclosures to increase volume. For all these reasons bass amplifiers and speaker cabinets tend to be different to their guitar equivalents.

Probably the most famous brand associated specifically for its bass amplification is the American company Ampeg, founded in 1946 and now under the ownership of Japanese giant, Yamaha. Ampeg started out attempting to amplify the acoustic double bass in 1949 by using a microphone/pickup in the instrument’s stand. The ‘Amplified Peg’ as it was called was then shortened to ‘Ampeg’ and the rest, as they say, is history. Their most famous range of amps was the 300W Ampeg SVT from 1969 and their bass combo amps, the B‑15 from 1960, as used by the likes of Motown session bass player James Jamerson.

It was no surprise that Fender, the leader in the world of bass guitars from the 1950s should also produce bass amps/cabs. Perhaps the most famous Fender bass amp was the Bassman from 1952 onwards, first introduced as a combo valve amp with a 15” speaker. The most desirable though, was the Dual Rectifier Bassman valve combo with 4×10” speakers. From 1960. Fender also released a ‘piggy back’ amp head and speaker cabinet design to cope with higher power levels and to provide flexibility. From 2000, Fender released a solid state version of the legendary Bassman amp. The original valve Bassman also became beloved by many guitar players for its tone, for instance by the late blues rock guitarist, Stevie Ray Vaughan (SRV).

Student bass players also needed a bass amp. So Fender introduced the Musicmaster Bass amplifier in 1970, as a companion to the Fender Musicmaster Bass guitar. The Musicmaster Bass combo amp was a very simple affair with one channel, 12W of power, volume and tone controls and a single 12″ Fender speaker. Like the Bassman, it has latterly been enjoying a bit of a revival as a budget vintage amp for guitarists. The Musicmaster Bass amp was discontinued in 1982 after the introduction of the Fender Studio Bass combo and Japanese Fender Sidekick Bass 30. Nowadays, the extensive Fender Rumble series has proved very popular with bass players.

Legendary British amplifier company Marshall was not going to be left behind. Marshall’s first 100‑watt bass head was the JTM 45/100 / JTM 45 Super 100 model. Another, also dating from the second half of the 1960s, is the JMP #1992 Super Bass 100 (100W) and JMP #1986 Bass (50W). Like the Fender Bassman, the Marshall Super Bass 100W also proved popular with guitarists. Bass players were also known to use the Marshall #1963 Super PA (50W) and Marshall #1968 Super PA (100W) amps.

Another legendary British amplifier company, VOX produced bass versions of its AC‑15 and AC‑30 combo amps. These were followed in 1963 by the VOX T‑60 and Foundation amps, the latter promoted by Bill Wyman of the Rolling Stones.

German acoustic amp company AER also produce a range of bass amps, particularly well‑suited to amplifying acoustic and electro‑acoustic bass guitars.

Bass guitarists turn out to be a little less conservative than their guitarist counterparts, especially when it comes to amplification and speaker cabinets. For instance there are plenty of modern‑day bass amps that use efficient solid state D‑class amplification (a type of amplifier that uses digital switching technology to amplify audio signals efficiently), with very high power ratings – 500W and 600W or more being not uncommon. Bass amps often also make wide use of sophisticated on‑board EQ. Speaker cabinet configurations also tend to be more versatile with reflex ports, horns, tweeters and combining multiple speaker types being common.

There are many other valve, solid state or hybrid bass amplifier manufacturers not mentioned above, including Trace Elliot, Ashdown Engineering, Mesa/Boogie, Peavey, Music Man, Hiwatt, Laney, Sound City, H/H, WEM, Hartke and Orange.


Bass guitar effects

Things have changed a great deal over the decades since 1951. In the early days of the solid body electric bass guitar, most players plugged straight into their amps without much in the way of tone augmentation.

By the 1970s and 1980s bass players had a paucity of effects specially designed for their instruments, so they generally adopted guitar effects with just a few bass‑specific pedals to choose from. Since the industry started to migrate to digital technology from the 1980s onwards, the major effect companies began to produce pedals designed primarily for use with bass guitars. Now, in the 2020s, there is plenty of choice with most of the big players in the effect industry now making bass‑specific effect pedals, including Electro‑Harmonix, MXR, BOSS, Ibanez, Fender, Laney and Ampeg.

In addition, from around the start of the new millennium, a number of manufacturers turned their ideas for integrated multi‑effect units into practical musicians’ tools that became popular for both guitar and bass, including BOSS, VOX, Zoom, Tech 21, Behringer and Valeton.

In 1998, Line 6 introduced a ground‑breaking innovation called the POD, which put many guitar effects, amps and cabinet emulations into a single portable unit. While the little red kidney shaped POD was initially directed at guitarists, the rack mounted Line 6 POD Pro models came in both guitar and bass versions. Since then, Line 6 and other manufacturers now combine guitar and bass amp/effect/cabinet emulations into a single unit. These units are constantly improving and are gradually replacing stage backlines with direct input (DI) into PAs/monitors, as well as into studio desks/DAWs. Along with the POD, Line 6, also now part of Yamaha, is still in the same business with their extensive Helix range.

Alternatives to the Line 6 POD and Helix units include the Axe-Fx III from Fractal Audio, which is a pro‑level amplification/effects processor suitable for both guitar and bass. Meanwhile, Kemper Amps took a slightly different route with their Profiler, which has all‑in‑one effects, amplifier and speaker cabinet profiles designed for both guitar and bass.

Just to finish off, there are numerous boutique effect pedal manufacturers that produce stomp boxes, often to very high degrees of quality, including brands such as Way Huge, TC Electronic, EarthQuaker Devices, Darkglass, Aguilar, Origin Effects, Free The Tone, Providence, Source Audio, Walrus Audio, ZVEX, Mooer Audio, Sansamp, Digitech, Eventide, Strymon, JHS, Keeley and Empress Effects.


Iconic (and other) bass guitars

The next sentence is likely to be highly provocative and intentionally so. While there are innumerable bass guitar models out there from 1951 to the current day, there are probably only four bass guitar models that can truly be called iconic (i.e. something that is widely considered to epitomize an era, culture, community or place). The four key instruments – none of which are based on guitar equivalents – that stand head and shoulders above the rest are:

Truly iconic bass guitars:
Fender Precision Bass (1951‑date)
Fender Jazz Bass (1960‑date)
Rickenbacker 4000 series (1957‑date)
Music Man Stingray Bass (1976‑date)

In addition, below are listed just a very few of the other great electric bass guitars manufactured from 1951 onwards. This is far from a comprehensive list and is intended only to be broadly indicative of the type.

Fender bass guitars:
Fender Bass V
Fender Bass VI
Fender Coronado Bass
Fender Mustang Bass
Fender Musicmaster Bass
Fender Performer
Fender Telecaster Bass
Squier Bronco Bass

Gibson bass guitars:
Gibson EB series
Gibson Thunderbird
Gibson Explorer Bass
Gibson Melody Maker Bass
Gibson Grabber/Ripper/G3
Gibson RD series
Gibson Triumph
Gibson Victory
Gibson 20/20 Bass

Epiphone bass guitars (not including Epiphone versions of Gibson basses):
Epiphone Embassy
Epiphone Newport
Epiphone Rivoli
Epiphone Viola

Other American brand bass guitars:
Alembic Series 1/2
Ampeg Dan Armstrong Lucite
Ampeg AEB-1
BC Rich Eagle
BC Rich Mockingbird
BC Rich Warlock
Danelectro Longhorn 4623
Danelectro Shorthorn 3612
G&L JB2
G&L L1000/L2000
Gretsch 6071/6072
Gretsch G2220 Junior Jet
Gretsch 5440 Electromatic
Guild B-301/B-302
Guild Starfire
Harmony H22
Harmony H27
Jackson JS
Kramer 450-B/650-B
Kramer DMZ
Lakland Skyline
Music Man Sabre
Music Man Sterling
National Val Pro Model 85
Ovation Magnum
Peavey T-40
Peavey Millennium/Milestone
PRS SE Kestrel/Kingfisher
Schecter Omen
Schecter Stilletto
Silvertone 1440 series
Steinberger Spirit XT
Steinberger Synapse
Supro Pocket
Travis Bean TB2000
Washburn Taurus

European bass guitars:
Burns Sonic
Hagström H8
Höfner Club
Höfner HCT-500/1
Höfner President
Hohner B2
Hohner The Jack
VOX Clubman
VOX Cougar
VOX Phantom 4
VOX Sidewinder
VOX VBW Teardrop Bass
Wal Mk1/Mk2
Warwick Thumb/Streamer/Infinity/Corvette
Warwick Rockbass

Japanese bass guitars:
Other than perhaps the Yamaha BB and TRBX series, and the Ibanez SR and TMB series, Japanese bass guitars do not have the same level of brand/model heritage when compared to those produced by American and European companies. There are, however, many Japanese basses produced by companies such as Ibanez, Tokai, Greco, Jedson, Westone, Teisco, ESP/LTD, Fernandes and Aria.

“Without the Fender bass, there’d be no rock n’ roll or no Motown. The electric guitar had been waiting ’round since 1939 for a nice partner to come along. It became an electric rhythm section, and that changed everything.” – Quincy Jones (1933‑)


Famous bass players

Below are listed seventy of the world’s most famous and influential bass players – alive and departed – including upright double bass and electric solid body bass guitar players. There are, of course, many, many more but this is an indicative list for those interested in exploring some of the music created by these diverse musicians (in alphabetical order):

Aston ‘Family Man’ Barrett (Bob Marley & The Wailers)
Walter Becker (Steely Dan)
Andy Bell (Oasis)
Bill Black (Elvis Presley)
Jack Bruce (Cream)
Cliff Burton (Metallica)
Geezer Butler (Black Sabbath)
John Cale (Velvet Underground)
Stanley Clarke (Return To Forever, solo)
Adam Clayton (U2)
Bootsy Collins (James Brown, Parliament/Funkadelic)
Tim Commerford (Rage Against The Machine/Audioslave)
Billy Cox (Jimi Hendrix)
John Deacon (Queen)
Kim Deal (Pixies, Breeders)
Willie Dixon
Gail Ann Dorsey (David Bowie)
Bernard Edwards (Chic)
John Entwistle (The Who)
Flea (a.k.a. Michael Peter Balzary – Red Hot Chili Peppers)
Bruce Foxton (The Jam)
Simon Gallup (The Cure)
Roger Glover (Deep Purple)
Kim Gordon (Sonic Youth)
Larry Graham (Sly & The Family Stone)
Marshall Grant (Johnny Cash)
Steve Harris (Iron Maiden)
Dusty Hill (ZZ Top)
Peter Hook (Joy Division, New Order, The Light)
Glenn Hughes (Deep Purple)
Jah Wobble (a.k.a. John Joseph Wardle)
James Jamerson (session musician)
Louis Johnson (The Brothers Johnson)
John Paul Jones (Led Zeppelin)
Carol Kaye (session musician)
Lemmy Kilmister (Hawkwind, Motörhead)
Mark King (Level 42)
Alan Lancaster (Status Quo)
Geddy Lee (Rush)
Phil Lesh (Grateful Dead)
Tony Levin (Peter Gabriel)
Jenny Lee Lindberg (Warpaint)
Phil Lynott (Thin Lizzy)
Glen Matlock (Sex Pistols)
Paul McCartney (The Beatles, Wings, solo)
Duff McKagan (Guns N’ Roses)
John McVie (Fleetwood Mac)
Marcus Miller (Miles Davis, Herbie Hancock, George Benson)
Charles Mingus
Krist Novoselic (Nirvana)
Pino Palladino (session musician)
Jaco Pastorius (Weather Report)
Guy Pratt (Madonna, David Gilmour)
Suzi Quatro
Dee Dee Ramone (Ramones)
Noel Redding (Jimi Hendrix)
Mike Rutherford (Genesis)
Robbie Shakespeare (Sly & Robbie)
Billy Sheehan (Steve Vai, David Lee Roth)
Gene Simmons (KISS)
Nikki Sixx (a.k.a. Frank Carlton Serafino Feranna Jr. – Mötley Crüe)
Chris Squire (Yes)
Sting (a.k.a. Gordon Sumner – The Police)
Danny Thompson (John Martyn)
Thundercat (a.k.a. Stephen Lee Bruner)
Robert Trujillo (Metallica)
Sid Vicious (a.k.a. Simon John Ritchie – Sex Pistols)
Roger Waters (Pink Floyd)
Tina Weymouth (Talking Heads, Tom Tom Club)
Tal Wilkenfeld (Jeff Beck, Prince)
Bill Wyman (Rolling Stones, Bill Wyman’s Rhythm Kings)

“The gunk takes the funk” – James Jamerson (1936‑1983)


Bass in the (near) future

It is difficult for, and unfair of, me as a guitarist, to predict any sort of unified future for the bass guitar but I’ll give it a shot.

The traditional conservative brigade will still stick to tried and tested instruments and equipment. Musicians looking for something a bit different will probably want to experiment with the format, for instance number of strings, scale lengths, pickups and electronics. If anything there will be more radical and custom bass guitar designs from up‑market and boutique luthiers that diverge from the traditional archetype set by Fender over 70 years ago. Many additions to the form extend the flexibility of the core instrument, so it may be a case of further evolution, rather than revolution.

Bass amplification will continue to diverge from its simple valve origins and continue to embrace the digital realm, probably dispensing with backline amps/cabs altogether with signals being DI’d into desks/PA/monitors.

While bass players haven’t been particularly well served in the past for bass‑specific effect pedals, I anticipate that bass effects will achieve greater representation, including some out‑there effects not currently available to guitar players.

Bass guitar players have struggled to compete, with synthesisers dominating the world of modern electronica, dance and popular music. At least, for now (thankfully), the bass guitar remains essential to most guitar‑based music in a sort of symbiotic, co‑dependent relationship. As long as guitars keep going, so will bass, and vice versa. Bass players, being ever inventive individuals, will adapt and cultivate new ways to keep the instrument relevant, current and in the limelight for decades to come.

Technique‑wise, there will continue to be the traditional approaches towards walking bass lines, typically using the fundamental root/fifth styles that has been the general mainstay of modern music for decades. In contrast, there will be many more amazing virtuoso bass players who see the versatility and potential of the instrument in its own right.

So, other than tangible incremental progress around the margins, there is probably not a whole lot that will change profoundly in the near future. I may be wrong with that last sentence. In many ways, I hope so!

Interestingly, while the upright double bass continues to appear in modern music from time to time, the solid body fretted electric bass hasn’t really made any headway into the clique of conservative classical orchestral music, which still relies heavily on the traditional, some may say archaic, acoustic upright double bass.


Resources

Periodicals dedicated to bass guitar may be the best place to keep up‑to‑date with the technology and equipment associated with the instrument. Publications include Bass Musician Magazine, Bass Player Guitar Magazine, Bass Guitar Magazine, Bass Magazine, Bass Musician and Bass Gear Magazine.

Online resources include Music Radar, TalkBass.com, Basschat and No Treble. There are also many books on bass guitars and bass playing techniques, including the inevitable, ‘Bass Guitar For Dummies’.

As far as purchasing bass guitars, there are the large Internet sites, brick & mortar retailers and the usual online sites, Reverb.com and eBay. For vintage and rare bass guitars, there are outlets purely for basses including (in the UK) Andy Baxter Bass, The Bass Gallery, The Bass Centre, Vintage Bass Room and ClassicandcoolGuitars.


Some final thoughts

I certainly learnt a lot from researching and writing this article. At first sight, there may seem to be quite a bit of relevant information on the Internet. It is only when one starts to dig deeper and attempt to put something together that makes some form of sense that things rapidly become unclear. All of a sudden, much of the available information seems incomplete, contradictory, vague and/or outright erroneous. In the end, it comes down to evidence and corroboration but sorting the wheat from the chaff isn’t always easy. It seems that online information about vintage guitars is far more reliable than that about vintage basses. There are far too many poorly informed people who invent facts and present opinion as truth.

Despite my best attempts to piece things together, I may have fallen foul of the same issues raised above. However, I have tried very hard not to fill in gaps with assumptions and/or fiction. While I endeavour to be thorough and rigorous, my approach isn’t academic and I don’t have the time, funds or energy to provide the last word in scholarly fact. The contents herein should therefore probably not be relied upon too heavily. This article should, for that reason alone, be regarded as my best intention to balance fact with entertainment.

“Believe nothing, no matter where you read it, or who said it, unless it agrees with your own reason and your own common sense.” – Buddha (Siddhārtha Gautama – c.480‑400BCE)

This is just the sort of article that would benefit greatly from images to illustrate and break up the narrative. Sadly as a (broke) not‑for‑profit entity, I cannot afford the costly copyright/royalties charged for the use of relevant images, so I have had to rely on very limited free/public domain resources or my own photographs. I apologise for the thousands of words used to describe what images could do in none. Once again, no AI was used in the research and writing of this tome – only my own hard work.

NB. Apologies to anyone disappointed by the wait for a cheap, clichéd joke at the expense of ‘the bass player’! T’ain’t gonna happen here. Love ‘the bass player’.


CRAVE Guitars’ ‘Album of the Month’

Given that this month’s article focuses on the fascinating history of the bass guitar, it seems only fitting to select an album that demonstrates the virtuoso bass playing of one of the greatest bass guitarists of all time, Jaco Pastorius (1951‑1987) and his famous modified fretless Fender Jazz Bass.

Weather Report – Heavy Weather (1977) – The seventh and most commercially successful studio album by the American jazz fusion band. ‘Heavy Weather’ was the first album with Pastorius on full‑time bass duties. The smooth jazz funk production of the album, which was released at the peak of the punk rock movement in the US and UK, stood in stark contrast to the otherwise brutal sounds of the late 1970s. Given that it sold in huge numbers (and still does) is testament to the composition and musicianship on display. Initial sales were about 500,000 and total sales to‑date are over 1.06 million. Other Weather Report albums may be ‘better’ according to purists but this is the one I heard first and it has stuck with me over the years.

Weather Report – Heavy Weather (1977)

To me, this album hit me right between the eyes about what virtuoso bass playing can be like. There are many, many other artists and albums that could arguably take the acclaim, for instance Stanley Clarke’s successful solo album, ‘School Days’ (1976), but on this occasion, the late, great Jaco (& co.) takes the accolade, such as it is.

“I’m the greatest bass player in the world” – Jaco Pastorius (1951‑1987)


Tailpiece

Well, there you go. I think that most of us love a bit of decent low bass in our music. I hope y’all got something out of this fleeting exploration into the defining instruments, artists and music of the lower registers. I think the narrative works well as a complement to the launch of CRAVE Basses at the end of 2023, but that’s just my (obviously biased) opinion.

I hope you feel inclined to come back next month to see what’s currently fermenting in the CRAVE guitars’ secret brewery.

Truth, peace, love, and guitar music be with you always. Until next time…

CRAVE Guitars’ ‘Quote of the Month’: “Mundanity is the devourer of lost dreams”

© 2024 CRAVE Guitars – Love Vintage Guitars.

Like it? Why not share it?

December 2023 – CRAVE Guitars: Three Years in Review

Prelude

GOOD DAY’S SALUTATIONS and seasonal best wishes to all you good folks out there in music land. Welcome to vintage gear aficionados and greetings to the conclusion of the year, two thousand and twenty three. There is no point in, and no good will come from, re‑hashing the journey over CRAVE Guitars’ 3‑year hiatus once again, so it is now officially behind us and a thing of the past. Gone. However, there may be merit in looking briefly at what CRAVE Guitars actually got up to behind the scenes during that time. It is the end of the year, so it’s kinda traditional for review anyway, as has been the practice in years past. This review, though, isn’t a single year but three years in retrospect. As it transpires, less has happened in those three years than would normally have occurred in one year prior to 2020’s global meltdown. Perhaps that is just as well. If the previous trend had continued unabated, CRAVE Guitars would have run out of space and funds a long time ago. I guess that there are silver linings at the end of the tunnel after all (I really must stop playing with mixed metaphors! Bad CRAVE!).

Well, there is no point in perpetuating petty procrastination, so let’s proceed with some prosaic pontification (nothing like a bit of CRAVE’s addictive affinity for asinine alliteration, again!). All text and images copyright of CRAVE Guitars. No AI used here.


‘New’ old gear over the past 3 years

The volume of acquisitions may not be great but the choices, I believe aren’t too shabby. I aim for variety and novelty in my quest for something a wee bit different to the norm, at least as far as the guitars are concerned. Here, there are two are from the 1960s, two from the 1970s and one from the 1980s. The effects are slightly more numerous and there is a little bit of gap‑filling going on here but variety is again a factor. Only 3 out of the 11 stomp boxes are ‘Made in USA’. Interesting. Right, here is the short shortlist…

Guitars and basses (5):

1963 Danelectro Pro 1
1989 Fender Jazz Bass American Standard Longhorn
1978 Fender Musicmaster Bass
1979 Gibson Explorer E2
1964 National Glenwood 95

Effect pedals (11):

1985 BOSS HM-2 Heavy Metal (distortion)
1984 BOSS SD-1 Super Over Drive
1979 BOSS SG-1 Slow Gear (auto swell)
1974 Colorsound Supa Tone Bender (fuzz)
1970s Colorsound Supa Wah-Swell
1970s DOD Analog Delay 680 (echo)
1980s Dunlop Original Cry Baby GCB-95 Wah
1970s Electro-Harmonix Switch Blade Channel Selector (A‑B switch)
1981 Ibanez CP-835 Compressor II
1984 Ibanez SM9 Super Metal (distortion)
1989 Marshall The Guv’nor (overdrive/distortion)

Over the last three years, there haven’t been any ‘new’ vintage valve amps. This is mainly due to space restrictions and the responsibility for maintaining these delicate electrical artefacts. They weren’t delicate when originally manufactured, they were built to go on the road and put up with punishment. However, after 60 or 70 years, they tend to get a bit temperamental. A bit like humans in fact. The last amp that joined the family was the fantastic little 1973 Fender Princeton Reverb ‘silverface’. Possibly my favourite amp.

There has been one notable departure from the CRAVE Guitars family. I was looking around for a Gibson Explorer E2 to partner the Gibson Flying V2. However, I couldn’t really justify yet another Explorer. Then, someone contacted me out of the blue enquiring about the black 1984 Gibson Explorer. If there was one guitar that I would let go to trade up, that was the one. It can be really strange how opportunity can present itself as coincidence. Eventually, deals were agreed and one came in while one went out. Serendipity and status quo. Result! I hope the 1984 Explorer is in a happy place.

Let’s take a closer look at the ‘new’ guitars – all of them exhibiting unusual construction and specification, making them exceptionally cool and rare (in my opinion). Right, here is the long shortlist…

1963 Danelectro Pro 1 – I first saw one of these a few years ago and was struck by its utter simplicity and quirky charm. Nothing fancy going on here. It is diminutive, dinky and hyper cute. It is, however not very practical. It has a short scale and upper fret access is awkward and only one pickup will limit it for some. However, it has all the usual Danelectro traits, including the unique construction and that classic lipstick pickup. It is definitely not everyone’s cup of tea but, for me, that’s a good reason to dig it. It is a genuinely unique instrument and SO cool that it hurts. It’s great fun to play too.

Feature: 1963 Danelectro Pro 1

1963 Danelectro Pro 1

1989 Fender Jazz Bass American Standard Longhorn – I have long wanted a Fender Jazz Bass. The new CRAVE Basses has allowed me to indulge that luxury. However, this isn’t a Jazz Bass as you know it and definitely not in the long tradition of the J‑Bass. This lovely beast is a Longhorn, only made for five years, this one from the first year of production. The deep cutaways and 22 fret neck make it look, feel, play and sound different from a ‘normal’ Jazz Bass. The Longhorn nickname gained it an altogether humorously crude moniker of the ‘boner’ bass. Now this one lives with me, I actually now prefer the look of this unusual instrument over the one that defined the icon.

Feature: 1989 Fender Jazz Bass American Standard Longhorn

1989 Fender Jazz Bass American Standard Longhorn

1978 Fender Musicmaster Bass – Another oddity and one of the ‘lost Fenders’. After the success of the Mustang Bass, Fender went on to release an even simpler budget model. The Musicmaster has the Mustang’s short scale but the pickup is actually a 6‑pole Mustang guitar pickup. The overall design and specification certainly alienated a whole bunch of players but that kind of misses the point. Snobs. Take the bass purely on face value and it’s actually a decent ‘student’ bass with great build quality and that offset body look that is currently very popular. Not one for the traditionalist. Note: Since the feature and photos were published, the original 2‑saddle bridge has been reinstated.

Feature: 1978 Fender Musicmaster Bass

1978 Fender Musicmaster Bass

1979 Gibson Explorer E2 – Some people hate the Gibson Flying V2 and Explorer E2. I love them because of their unusual multi‑layered construction. As mentioned above, finding an E2 was a mission. Moreover, this one belonged to the lead singer of the band Go West, Peter Cox. Kudos and thanks Peter. I don’t usually go for provenance but in this case, it adds something significant to the guitar’s backstory. It’s the walnut‑faced model (some are maple‑faced) and in wonderful near‑original condition. While it’s not quite as whacky as the admittedly peculiar V2, it has plenty of character and charisma. The Gibson Explorer, I think, remains my overall favourite guitar model.

Feature: 1979 Gibson Explorer E2

1979 Gibson Explorer E2

1964 National Glenwood 95 – Here’s a glorious instrument with another unusual type of construction. The body is moulded fibreglass, what the makers, Valco, called Res‑O‑Glas. I was expecting the material to be thin and plasticky. Instead, it is quite thick and solid. The two halves are screwed together leaving the interior hollow. It is very unique and an awesome entry in vintage guitar history. Not only is it well built, it is visually striking in just about every way. Whatever part you look at or whatever angle it is viewed from, it is a startlingly beautiful creation. Neither is it a case of style over substance, it plays very well and with an inimitable sound. I could go on and on but I’ll let it speak for itself.

Feature: 1964 National Glenwood 95

1962 National Glenwood 95

… and, now moving on to the ‘new’ vintage effect pedals:

1985 BOSS HM-2 Heavy Metal – A pedal renowned for creating a whole heavy metal sub‑genre thanks to Swedish death metal band Entombed and their debut studio album, ‘Left Hand Path’ (1990). Not many stomp boxes can claim that distinction. It is a monster. This one also comes with its original box and documentation. Very cool.

Feature: 1985 BOSS HM-2 Heavy Metal

1985 BOSS HM-2 Heavy Metal

1984 BOSS SD-1 Super Over Drive – Considered by many as a classic in the BOSS overdrive tradition. The SD‑1 adds a Tone control to the existing BOSS OD‑1 Over Drive to give it more flexibility and to help BOSS compete with other brands’ overdrive pedals. The SD‑1 has been seen on pedalboards all over the world for decades, earning it its enviable reputation.

Feature: 1984 BOSS SD-1 Super Over Drive

1985 BOSS SD-1 Super Over Drive

1979 BOSS SG-1 Slow Gear – This is one of the rarest, most collectable and misunderstood BOSS stomp boxes. The name gives nothing away. It acts a bit like a noise gate in reverse, the filter creating an auto swell effect. It is quite unique. After much experimentation, there is really only one sweet spot so, to be honest, sadly, it is a bit of a one‑trick pony, albeit an exclusive one.

Feature: 1979 BOSS SG-1 Slow Gear

1979 BOSS SG-1 Slow Gear

1974 Colorsound Supa Tone Bender – The Supa Tone Bender is basically just a big box version of the original Colorsound fuzz. There is no room in this article to dive into the nerd zone and cover its origins or its similarities/differences to other models. The numerous gear obsessives out there will tell you at great length about all the geeky differences. Basically, it’s a great 1970s fuzz pedal. What more do you need to know?

Feature: 1974 Colorsound Supa Tone Bender

1975 Colorsound Supa Tone Bender

1970s Colorsound Supa Wah-Swell – Another over‑sized ‘Supa’ version of a standard combination wah‑wah and swell pedal with a footswitch to go from one mode to the other. There’s very little on the inside other than empty space, indicating that the old marketing ploys of ‘more is more’ and ‘bigger is better’ played a part here. 1970s pedalboards weren’t as crowded as they are today, so pedals like this gained bragging rights. I can’t date this one accurately.

Feature: 1970s Colorsound Supa Wah-Swell

1977 Colorsound Supa Wah-Swell

1970s DOD Analog Delay 680 – Here is a truly wonderful 1970s American echo pedal. It’s not quite up with the benchmark Electro‑Harmonix Deluxe Memory Man but it is still authentic and very musical. I love these old analogue delays. It’s great fun to use and sounds great. It may not be in great cosmetic condition on the outside but few are because they were well used, an indication of what really matters to working musicians.

Feature: 1970s DOD Analog Delay 680

1980 DOD Analog Delay 680

1980s Dunlop Original Cry Baby GCB-95 Wah – Probably one of the most iconic wah‑wah pedals of all time. This one is a straightforward model from the 1980s. As classic as they come, you know exactly what you are going to get. The model has probably been used by most of the great guitarists at some point during their careers. The pot is a bit scratchy but I can’t bear to replace it, so it’s still original.

Feature: 1980s Dunlop Original Cry Baby GCB-95 Wah

1980s Dunlop Original Cry Baby GCB-95

1970s Electro-Harmonix Switch Blade Channel Selector – Strictly this is not an effect, just an A‑B switch. Another ‘no bones’ pedal with nothing much inside the box. It has one input and two outputs (or vice versa if you wish). Not massively useful or flexible but it does what it needs to do in a simple set up. Typical 1970s EHX styling to boot.

Feature: 1970s Electro-Harmonix Switch Blade Channel Selector

1970s Electro-Harmonix Switch Blade Channel Selector

1981 Ibanez CP-835 Compressor II – A pedal in the classic ‘square switch’ ‘0’‑series Ibanez effect pedal series (as is the most desirable TS‑808 Tube Screamer). The CD‑835 (catchy name, that. Not) is a perfectly capable pedalboard compressor. I still prefer the basic MXR Dyna Comp but this one will appeal to others. This one comes with its original box and documentation.

Feature: 1981 Ibanez CP-835 Compressor II

1981 Ibanez CP-835 Compressor II

1984 Ibanez SM9 Super Metal – Part of Ibanez’s ‘9’‑series, the SM9 is a massively beefed up Ibanez TS9 Tube Screamer but without the reputation of the latter, so it is a bit of a dark horse. Much more flexible and with a greater range of sounds available. It is a bit fiddly to recreate just the right tone but it is worth the effort involved in getting it tuned in. How far do you want to go? Pretty colour too.

Feature: 1984 Ibanez SM9 Super Metal

1984 Ibanez SM9 Super Metal

1989 Marshall The Guv’nor – Way, way before the current fad of putting a guitar pre‑amp on a pedal board, Marshall basically came up with the idea back in the 1980s. For those wanting classic Marshall tones without a 100W head and two 4×12 cabs stacked as they should be, there is The Guv’nor. For a large box full of transistors, rather than baking hot valves, it does an impressive job. Not necessarily accurate but great distortion on tap nevertheless. This is the original ‘Made in England’ version, complete with its box.

Feature: 1989 Marshall The Guv’nor

1989 Marshall The Guv’nor

There you have it, a brief rundown of 3 years’ collecting cool and rare vintage guitar gear in the background. Not a great deal to show for 36 months in terms of quantity but a nice range of quality. I am completely out of both storage space and funds, so any progress will be slow and steady for a while.


CRAVE Guitars’ website

The superficial sheen of the website hasn’t really changed much at all. However, there are technical changes beneath the surface that will hopefully keep it up‑to‑date and relevant. I’m no techno whizz, so CRAVE Guitars doesn’t appear on the prized ‘first page of Google’. Still, seeing as it is not a commercial enterprise, I’m not overly bothered. Overall viewing figures though have continued to increase year‑on‑year over the last seven years, even through the hiatus, which is a promising sign.

The web site’s beneath‑the‑radar positioning hasn’t stopped all the typical spammers inundating CRAVE’s e‑mail box with the usual promotional BS. It is absolutely clear that they don’t do their research, so every single one them gets summarily blocked and deleted without exception. I do, however, welcome genuine communications via the website, so long as they are sincere.

The biggest ‘news’ on the website is the addition of the all‑new CRAVE Basses pages. The web site originally started out just as CRAVE Guitars almost a decade ago now. Then it expanded to include CRAVE Effects and CRAVE Amps a few years ago, so CRAVE Basses is a logical extension. Even though I’m primarily a guitarist, I like the occasional dabble with the lower frequencies. The new sections of the website include features on CRAVE’s four vintage basses, as well as additions to the galleries.

The two ‘new’ CRAVE Basses covered above join a pair of existing vintage basses that I’ve owned since the 1970s…

1977 Fender Precision Fretless

Feature: 1977 Fender Precision Fretless

1977 Fender Precision Fretless

1978 Music Man Stingray Bass

Feature: 1978 Music Man Stingray Bass

1978 Music Man Stingray Bass

Before Covid, the number of visitors to the site was steadily increasing and reaching peaks that I could only have dreamt about when I started. During Covid, things slowed dramatically, indicating that people, rightfully, had other things on their minds. This slow‑down was mirrored by consumer’s overall demand in the music equipment industry. Even after Covid, things have been slow. The so‑called cost‑of‑living‑crisis (thanks Putin et al), especially in the UK has hit most people (including me) hard and visits dropped right down to pre‑2020 levels. Other priorities rightly prevailed once again. Despite being generally subdued, visits seem to be gradually increasing again but it is way too early to call it a trend.

I actually have quite a bit more content already written for the site that I will get around to publishing at some point. It’s not super critical but it seems a shame not to use it.


CRAVE Guitars’ (un)social media

I really don’t have the resilience to return to social media to the same level as in the past. However, CRAVE Guitars is posting things irregularly on Musky old X (ex‑Twatter), Facebook and LinkedIn. I can’t respond to messages but I do review them every so often. That will have to do for now. My engagement with social media is not negotiable for now.


CRAVE Guitars’ database

There is not really a great deal to say about this other than I use it to catalogue all of CRAVE’s vintage guitars in some detail. In the case of catastrophe such as fire, flood, theft, cat, etc., at least the information should be safe and sound. A copy is saved in the cloud just in case the laptop goes the same way.

CRAVE Guitars Database

Brand augmentation

No, I’m not getting bigger brands for all you fetishists out there. CRAVE Guitars has been around since 2007. The short name is OK but it isn’t specific enough to identify that vintage guitars are the focus of the ‘brand’. The full name of CRAVE (Cool & Rare American Vintage Electric) Guitars is certainly specific enough although it is a bit of a mouthful when it comes to everyday use. Internet SEO (Search Engine Optimisation) also has some difficulty placing the CRAVE Guitars brand in the vintage guitar category. Type ‘CRAVE guitars’ into a search engine and the site appears straight away. Type in ‘vintage guitars’ and the site may eventually appear plenty of pages down.

So… In addition to the established short and full names used above, I will also be using the name CRAVE Vintage Guitars to help searchers and visitors to get a better understanding of what this strange entity is all about. It is a small but important change. It will take search engines a while to pick up on it but it might help people find the site. Future CRAVE Guitars merchandise is also likely to carry the updated branding as and when needed. As ‘they’ say, it does what it says on the tin (apart from the amps, effects and basses of course. Doh!).


Musical history update

It’s a while since the 14‑part CRAVE Guitars’ series of articles, ‘The Story of Modern Music in 1,500+ Facts’, culminated in May 2020. Sadly, we have lost far too many great music people since I published the last of the ‘Facts’ just 2½ years ago.

The inevitability of life is that it ends. RIP great men and women. This list picks up from where that last article on the subject left off. Here are just a few of them.

DayMonthYearMusic Fact
4June2020English bass guitarist, singer and founding member of glam pop/rock band The Sweet, Steve Priest died at the age of 72.
18June2020English singer, songwriter and entertainer, nicknamed ‘The Forces’ Sweetheart’ during WWII, Dame Vera Lynn died at the age of 103.
6July2020Italian composer, conductor and musician, who wrote hundreds of cinema and television scores, Ennio Morricone died of complications after breaking a leg in Rome at the age of 91.
13January2021American guitarist with rock band New York Dolls, Sylvain Sylvain, died after a two-and-a-half year battle with cancer in Nashville, Tennessee at the age of 69.
17February2021Jamaican vocalist and pioneer of reggae ‘toasting’ U‑Roy (Ewart Beckford) died from complications following surgery in Kingston, Jamaica at the age of 78.
2March2021Jamaican singer, songwriter, percussionist and original member of The Wailers alongside Bob Marley and Peter Tosh, Bunny Wailer died from complications following a stroke in Kingston, Jamaica at the age of 73.
28July2021American bass guitarist and long-term member of southern blues/rock band ZZ Top, Dusty Hill died at his home in Houston, Texas, at the age of 72.
13August2021Celebrated American folk singer, guitarist, and songwriter Nanci Griffith died in Nashville, Tennessee at the age of 68.
24August2021English drummer with rock band the Rolling Stones for over five decades, Charlie Watts died in hospital in London at the age of 80.
29August2021Legendary Jamaican reggae and dub producer and recording artist, Lee “Scratch” Perry died of an undisclosed illness in hospital in Lucea, Jamaica at the age of 85.
26September2021English bass guitarist and founding member of pop/rock band Status Quo from 1967-1985, Alan Lancaster died from complications of multiple sclerosis in Sydney, Australia at the age of 72.
8December2021Jamaican bass guitarist and record producer, Robbie Shakespeare, best known as half of the reggae duo Sly & Robbie, died following kidney surgery in Miami, Florida at the age of 68.
10December2021American singer, guitarist and songwriter with TV pop band, the Monkees, Michael Nesmith died from heart failure at his home in Carmel Valley, California at the age of 78.
7January2022Canadian musician, singer, songwriter, and producer for Motown Records, R. Dean Taylor died at his home having contracted COVID‑19 (coronavirus) at the age of 82.
9January2022American jazz and R&B musician, songwriter, producer, and radio personality James Mtume died in South Orange, New Jersey at the age of 76.
12January2022American singer, co-founder and member the Ronettes, nicknamed the ‘bad girl of rock and roll’, Ronnie Spector died from cancer in Danbury, Connecticut at the age of 78.
20January2022American singer and actor Michael Lee Aday, better known as Meat Loaf, died from Wolff–Parkinson–White syndrome in Nashville at the age of 74.
19February2022English singer/songwriter, keyboard player and founder of the rock band Procol Harum, Gary Brooker MBE died from cancer at his home in Surrey at the age of 76.
22February2022American singer/songwriter who worked with Isobel Campbell and Queens Of The Stone Age, in addition to a lengthy solo career, Mark Lanegan died at his home in Killarney, Kerry, Ireland at the age of 57.
25March2022American rock drummer of the Foo Fighters, Taylor Hawkins died of heart failure probably caused by a drug overdose in a hotel in Bogota, Colombia at the age of 50.
4April2022American guitarist and member of Motown Records’ in‑house studio band, the Funk Brothers, Joe Messina died from kidney disease in Northville, Michigan at the age of 93.
26April2022German electronic music innovator, producer, composer and former member of krautrock band Tangerine Dream, as well as solo artist, Klaus Schulze died following a long illness at the age of 74.
17May2022Academy Award-winning Greek musician, composer and producer Evángelos Odysséas Papathanassíou, better known as Vangelis died of heart failure in Paris at the age of 79.
26May2022English keyboard player, DJ and founding member of electronica band Depeche Mode, Andrew Fletcher died of an aortic dissection at his home at the age of 60.
9June2022American singer known for her collaborations with film director David Lynch, Julee Cruise committed suicide in Pittsfield, Massachusetts at the age of 65.
8August2022British Australian singer and actress Olivia Newton-John died from breast cancer in Santa Ynez Valley, California at the age of 73.
28September2022American rapper Artis Leon Ivey Jr., a.k.a. Coolio died from a heart attack caused by a drug overdose in Los Angeles, California at the age of 59.
4October2022Highly acclaimed American country music singer and songwriter Loretta Lynn died from natural causes in Hurricane Mills, Tennessee at the age of 90.
28October2022American rock ‘n’ roll pianist singer and songwriter, Jerry Lee Lewis died from natural causes in DeSoto County, Mississippi at the age of 87.
10November2022English musician and key member of space rock band Hawkwind, Nik Turner died from unknown causes at the age of 82.
21November2022English guitarist, singer, songwriter and one‑time member of pub rock band Dr. Feelgood, Wilko Johnson died from pancreatic cancer in Southend‑on‑Sea, England at the age of 75.
30November2022English musician, singer and member of Fleetwood Mac, Christine McVie died of Ischemic stroke and metastatic cancer in London, England at the age of 79.
4December2022German musician, composer, member of Ash Ra Tempel and solo artist, Manuel Göttsching died from natural causes in Berlin at the age of 70.
11December2022Acclaimed American composer of film and TV scores, Angelo Badalamenti died from natural causes in Lincoln Park, New Jersey at the age of 85.
18December2022English musician, singer and member of The Specials and Fun Boy Three, Terry Hall died from pancreatic cancer at the age of 63.
23December2022British musician, rapper, singer, songwriter and DJ, front man of electronic band Faithless, Maxi Jazz (Maxwell Fraser) died from undisclosed causes in London England at the age of 65.
10January2023English virtuoso guitarist and former member of the Yardbirds, Jeff Beck died from bacterial meningitis in East Sussex, England at the age of 78.
18January2023Legendary American guitarist and singer, member of The Byrds and CSNY, David Crosby died from COVID-19 (coronavirus) in Santa Ynez, California at the age of 81.
28January2023American singer, songwriter and guitarist with alternative rock band Television, Tom Verlaine died from prostate cancer in Manhattan, NYC at the age of 73.
8March2023Legendary American composer, songwriter, producer and pianist, Burt Bacharach died from natural causes in Los Angeles, California at the age of 94,
5March2023American guitarist and founding member of southern rock band Lynyrd Skynyrd, Gary Rossington died from undisclosed causes in Milton, Georgia, USA, at the age of 71.
12April2023Influential Jamaican dub reggae sound system and record label owner, renowned for his work in London, Jah Shaka died at the age of 75.
1May2023Canadian singer, songwriter and guitarist Gordon Lightfoot died from natural causes in Toronto at the age of 84.
24May2023English bass player and member of post‑punk alternative rock band The Smiths, Andy Rourke died from pancreatic cancer in New York City at the age of 59.
25May2023The Queen of Rock ‘n’ Roll, American singer, songwriter and actress Tina Turner died after a long illness in Küsnacht, Switzerland at the age of 83.
6June2023English guitarist, singer and founder of blues/rock band Groundhogs, Tony McPhee died from complications after a fall and a stroke at the age of 79.
20June2023English guitarist with rock group The Pop Group, John Waddington died from undisclosed causes at the age of 63.
21July2023Legendary American jazz and popular music crooner Tony Bennett died from Alzheimer’s disease in New York City at the age of 96.
26July2023American musician, singer, songwriter, and founding member of the Eagles, Randy Meisner died from COPD in Los Angeles, California at the age of 77.
26July2023Irish singer, songwriter and activist Sinéad O’Connor died from unknown causes in London, England at the age of 56.
9August2023Canadian musician and guitarist for Bob Dylan and The Band, Robbie Robertson died from prostate cancer in Los Angeles, California at the age of 80.
24August2023Renowned English rock guitarist with Whitesnake and UFO, Bernie Marsden died from bacterial meningitis at the age of 72.
27August2023American musician best known for being one half of electronica duo Stars Of The Lid, Brian McBride died from undisclosed causes at the age of 53.
13September2023British singer, songwriter and musician Roger Whittaker died from a stroke in France at the age of 87.
30November2023British‑born Irish singer, songwriter, musician and frontman with Celtic punk rock band the Pogues, Shane MacGowan died from pneumonia and encephalitis in Dublin, Ireland at the age of 65.
5December2023English guitarist and founding member of The Moody Blues and Wings, Denny Laine died from lung disease at the age of 79.

Music industry opinion

A lot has (or rather hasn’t) happened in the music industry over the 3 years since CRAVE Guitars suspended its main activities. First, there was the hangover from global economic recession/depression, then the coronageddon, then the cataclysmic geopolitical conflicts adversely affecting far too many innocent peoples around the globe. At best, the music industry at all levels could only hope to hold its own.

In reality, it has been a tumultuous few years, to say the least. Everyone from equipment manufacturers (including their supply chains), venues, artists, music recording and distribution, publicity and management have been hit hard. Every conceivable facet of the market has been decimated. While I haven’t been able to keep up with events in the industry as I normally would have done, it is clear that things are only now just beginning to get back to 2019 levels.

Who would have predicted three years ago, for instance, that British amp stalwart Marshall would have been acquired by the Swedish digital music company, Zound Industries. A sign of the times, I guess.

Strategically, it has been a nightmare where even the best scenario planning has failed to predict wildly off kilter outcomes. Vintage guitar prices seem to have kept up as the super‑rich collectors are basically unaffected by economic blips that are savage to the rest of us. I know that I am paying more now than I would have done in 2019 for the same thing. While I am not economically motivated and CRAVE Vintage Guitars is a non‑profit enterprise, it is a relief that the 3‑year hiatus hasn’t totally wiped out the value of CRAVE Guitars’ precious artefacts.

It will take a long time for things to settle down and start to grow again. It will be a challenge for everyone involved for some time to come. The last three years haven’t signalled the death throes of the guitar music community. Yet. It has, however been badly wounded, let us hope not mortally so.


The guitar book

A while back, I was contacted out of the blue by a book publisher wanting to use one of CRAVE Guitars’ vintage guitars in their author’s new book on the subject. After a bit of formal toing‑and‑froing, it all went ahead and the book was published earlier this year. I was happy to do this for no commercial gain and the only reward was a shiny copy of the final print version and a credit in the acknowledgement section. While it won’t make CRAVE Guitars famous, I am quite proud of this minor morsel of exposure and recognition.

The book in question is, ‘Guitar: The Shape Of Sound – 100 Iconic Designs’ by author Ultan Guilfoyle, published by Phaidon Press (ISBN: 978 183866 558 6) (2023).

Link: ‘Guitar: The Shape Of Sound – 100 Iconic Designs’

Phaidon – Guitar The Shape Of Sound (2023)

The vintage guitar that was featured in the book is my lovely 1974 Ovation Breadwinner 1251 (see page 204‑205).

CRAVE Guitars Ovation Breadwinner

The pulp novel

As you may know, I have been writing on and off for some time, going back to the dim dark origins of CRAVE Guitars back in 2007. The main examples of this are the web site features and monthly articles on the CRAVE Guitars website over the last 9‑10 years or so, as well as the usual social media activity.

Very recently, I felt an irresistible urge to write a fiction novel. Its status is currently work‑in‑progress. It will be called, ‘The Distortion Diaries’ (remember, you read it here first). It started out as an amateur musician’s journal but the early content was clichéd, derivative and, frankly, very dull. It also wouldn’t fill a novel. So, I expanded the story to include a broader variety of situations and characters. The result will be, believe this or not, an eroti‑rom‑com with PARENTAL ADVISORY for Explicit Content. Even then, it isn’t at all what you might think or expect. Heck, how it turned out surprised me too! I don’t know if anyone will ever get to read it. It doesn’t matter. It is something creative that I had to do for myself. It isn’t good enough for a publisher to pick up and I have absolutely nil experience of self‑publishing, so it might never see the light of day. I have considered serialising it through the CRAVE Musings (i.e. the monthly blog articles) but I’m not sure the public is ready for some lovey‑dovey smut‑ridden muso pulp on a vintage guitar website though. The novel may end up just an aborted, ill‑advised, folly of an average superego’s gratuitous self‑indulgence. Thoughts on a postcard please.

Parental Advisory Label

Whether anything comes of this probably pointless fictional venture, I have no idea but it’s been addictive and fun to come up with something non‑factual for a change. And, no, it isn’t autobiographical, just in case you were wondering. Nor is it aspirational. Sadly, seeing as the protagonist has a ‘good time’ on the whole. Lucky git.

In truth, I would actually like to try and self‑publish the novel but I have no idea whatsoever about how to go about such an endeavour, so it will probably languish in long‑lasting literary limbo (stop it with the alliteration, already!).


New 2023 albums

As it’s the time of year for lists, here is a breakdown of 2023 album releases acquired during the year. As usual, these aren’t the only albums bought and neither will they be the only 2023 albums over time. Here are this year’s 33 purchases:

100 gecs – 10,000 gecs
Alborosie – Shengen Dub/Embryonic Dub
Caroline Polachek – Desire, I Want To Turn Into You
The Chemical Brothers – For That Beautiful Feeling
Creation Rebel – Hostile Environment
The Cure – Black Sessions: Maison De La Radio Paris 2004 (live broadcast)
Depeche Mode – Memento Mori
Don Letts – Outta Sync
Dub Pistols – Frontline
Everything But The Girl – Fuse
Fred Again.. & Brian Eno – Secret Life
Gentleman’s Dub Club – On A Mission…
Hollie Cook – Happy Hour In Dub
James Holden – Imagine This Is A High Dimensional Space Of All Possibilities
King Krule – Space Heavy
King Tubby & The Observer All Stars – Dubbing With The Observer
Kurt Vile – Back To Moon Beach
Lana Del Rey – Did You Know That There’s A Tunnel Under Ocean Blvd
Laurel Halo – Atlas
Mitski – The Land Is Inhospitable And So Are We
The Murder Capital – Gigi’s Recovery
The Orb – Metallic Spheres In Colour (Feat. David Gilmour)
The Orb – Prism
Orbital – Optical Delusion
Pigs Pigs Pigs Pigs Pigs Pigs Pigs – Land Of Sleeper
Queens Of The Stone Age – In Times New Roman…
Rolling Stones – Hackney Diamonds
Skindred – Smile
Sleaford Mods – UK GRIM
Slowdive – Everything Is Alive
Steve Hillage – LA Forum 31.1.77 (live)
X‑Press 2 – Thee
Yeule – Softscars

Is there a favourite 2023 album out of that lot? Well, I keep coming back to British alternative/indie shoegaze/dream pop band, Slowdive and ‘Everything Is Alive’ more than once, so that’s a fair choice at the time of writing. The big disappointment was Don Letts’ ‘Outta Sync’. Sadly. It comprises many well-crafted pop songs but very little of what I, and I think many others, hoped for in the way of heavy dub reggae tracks.

An even bigger disappointment for me was what didn’t appear. The Cure had hinted that their first studio album since 2008’s ‘4:13 Dream’, heralded as, ‘Songs Of A Lost World’ would be released in 2022. It was notable by its absence and many enthusiasts were hoping that it would finally see the light of day in 2023. The band tempted fans by playing several of the new tracks during their live concerts during the year. However, still nothing tangible has appeared on record store shelves. Let’s hope Robert Smith & co. get around to letting us hear it in 2024. Sixteen years is a long time to wait for new material. C’mon Bob, don’t keep us waiting any longer.

Note: I haven’t gone back to cover 2020, 2021 and 2022 lists of those year’s album releases, as this article would become just a loooooong list.


Whazzup for CRAVE Guitars in 2024?

Before Covid, I used to include at the end of the ‘review of the year’, a shortlist of vintage guitar gear that I might try to acquire in the subsequent 12‑month period. Rarely were the predictions spot on, or even close. Given CRAVE Guitars’ limited activity, space and funds, there is little point in speculating other than in very broad terms.

While there is always a long list of ‘most wanted’ guitars, it’s unlikely to expand significantly in 2024. I am actually generally relatively content with my lot. For now. I am sure that GAS (Gear Acquisition Syndrome) will strike again at some point.

Having launched CRAVE Basses in 2023, there are only four vintage bass guitars in the ‘collection’ thus far. There are a few I might be interested in looking for and which may improve diversity in this area.

There are no intentions for ‘new’ CRAVE Amps at the moment. But that can change, depending on opportunity.

I am also keeping an eye open for some interesting vintage stomp boxes for CRAVE Effects but it really depends on whether anything crops up at a reasonable market price.

The overall result is that there are no specific ambitions for 2024. Next year’s annual review will probably be very short and very dull! I have learned from past experience that predictions aren’t a good idea. Not only are they over‑ambitious but also they end up way wide of the mark. So, I will take things as they come and await any surprises with great anticipation. That sounds like it might be a bit more fun than reporting on yet another failed plan.


CRAVE Guitars ‘Record(s) of the Month’

It seems that this might become a regular feature. I listen to a lot of music (see last month’s article, ‘Music Machinations’ – November 2023). There are some albums that tend to stand out from the rest. There is no rhyme or reason why they do, they just do. Over the last month, I just can’t split two albums, which I’ve been enjoying amongst all the other great material out there. They both come under the general genre category of instrumental ‘stoner rock’ but that downplays their appeal. So, on account of there being SO much great music to discover, I’m going for the plural of ‘Record’ for December 2023. Let’s just call that extra little ‘(s)’ a Christmas/New Year treat for y’all. Enjoy

Eternal Tapestry – Beyond The 4th Door (2011) – First up is this strange thing of beauty. Eternal Tapestry is an American psych rock band based in Portland, Oregon. It may not be regarded by some as their best but it was their first ‘proper’ record label release, after several previous albums. It isn’t heavy. It sounds like a group of friends getting together for a jam session. To get that right is a LOT harder than people think. It is atmospheric, dreamy and so far out of this world that it leaves the sordid real world truly out of sight. Good. laid back, hypnotic, immersive, psychedelic and otherworldly experience.

My Sleeping Karma – Soma (2012) – Not the same as Eternal Tapestry but not too far off either. My Sleeping Karma is a German psych rock band from Aschaffenburg, Bayern and ‘Soma’ is their 4th studio album. The tracks are long, intentionally repetitive and with a gentle groove. It’s not quite an impromptu jam session but it has a distinctive psychedelic undercurrent that can be great for zoning out. I prefer this to other MSK studio albums, as it has a bit more variety within the confines of its moody origins. Emotional krautrock. Who’da thought?

Albums Of The Month – December 2023

Tailpiece

Good riddance to 2023. Funny (not) how I seem destined to repeat that same dreary sentiment every year. Ever hopeful and optimistically deluded, I have to remain confident that 2024 will be a bit better. Any improvement will be eagerly grasped. A new year, new opportunities.

My naïve wish and hope for 2024? Listen up all humans! Stop destroying our planet and stop killing each other. Then put all that wasted money to good use making a peaceful, sustainable civilisation, fare and just for all. A pipe dream, maybe, but one has to dream.

As far as articles for 2024 are concerned, I have a couple of ideas gestating, although nothing firmed up at this stage, Watch this space folks. Tune in, same time, same channel, next month. In the meantime, I wish you all a Happy New Year. Be good.

Truth, peace, love, and guitar music be with you always. Until next time…

CRAVE Guitars’ ‘Quote of the Month’: “The best thing in life is freedom”

© 2023 CRAVE Guitars – Love Vintage Guitars.

Like it? Why not share it?

February 2019 – A General Update

posted in: News, Observations, Opinion | 0

Hello again guitar fans and welcome to anyone else who may be curious about the big wide world of guitar addiction and obsession. As the great Jimi Hendrix once proclaimed, “Music is a safe kind of high”, so I’m happy to admit my perennial affliction. I trust that 2019 is treating you all well as we begin the move from dreary winter into nascent springtime.

I don’t have any particular theme for this month, so apologies in advance are probably due for what seems to be a generally incoherent rambling round up of various bits and pieces thrown together. One beneficial consequence is that this is a shorter tome than some.

State of Guitarville 2019

In the grand scheme of things, the guitar‑centric sector of the wider music industry is a relatively small but vibrant arena. While the general shrinking and decline of the ‘business’ continues well into the post‑recession era, the core elements seem in fairly good health overall. There is cautious optimism out there within the context of an unpredictable and challenging operating environment. There has been some progress since this time last year but not as much as many commentators might have wished.

Even though I wasn’t at the event, Winter NAMM 2019 held at the end of January in Anaheim, California saw a lot of activity and relatively good business was done. There were few ground‑shaking announcements at the convention but there was the usual excitement about shiny new gear from established brands. It was reassuring to see Gibson back at NAMM after their absence in 2018 and their new CEO is making all the right noises about what to expect from the company. Let’s hope that good intentions translate into achieving the right balance between quality and price, along with appropriate innovations alongside traditional instrument manufacturing. It is interesting that some of the more contentious technologies that were being used to reposition Gibson as a lifestyle company are now likely to be jettisoned in order to re‑establish confidence about, and a focus on, what really matters to their customers.

It is hardly a surprise that digital continues to make significant inroads into the analogue domain that has been the bedrock for so many generations of musicians across the globe. With the influx of ever more convincing digital inventions, one really does have to wonder how long analogue will remain the force it has been up to now. At some point, even the most hardened of luddites will be lured to make the jump either by the metaphorical lure of the carrot or the fear of the stick. There is still some way to go before all the components in a guitarist’s signal chain provide everything that the working professional musician needs for writing, rehearsal, live and recording settings.

The advantage for CRAVE Guitars and many other vintage enthusiasts is that we generally don’t need to worry about learning the operational demands and subtleties of this new‑fangled complex digital stuff and we can stick with what worked for us when we started out, complete with all its charming analogue idiosyncrasies (?!?!). One day, soon, digital will be the default and vintage gear will become a bit like vinyl records in there will be a market for it, even if it ultimately becomes a niche for nerdy specialists. For up‑and‑coming musicians who may not know any different, though, the current‑day smorgasbord of choice is phenomenal and, although the value‑for‑money equation on some equipment can be debated, the benefits are there to be discovered and exploited.

My sense, at the beginning of 2019 is that there is a degree of consolidation in design, manufacturing, marketing and distribution. The on‑going battleground between ‘brick & mortar’ retail and Internet business is still bitterly being fought out. At some point, an equilibrium will be reached where both channels will co‑exist, even if it means that the retail experience will be different from how it is now. Many consumers still greatly value going into a physical store, looking at, trying out and talking about equipment, so they will endure, even if those establishments have to offer other value‑added services on top of the traditional mainstay of shop floor sales. Companies that rely heavily on Internet operations will find overheads increasing, margins tightening and profitability harder to come by, thereby impacting sustainability and beginning to level the playing field a bit.

As far as guitars are concerned, as mentioned above, Gibson is poised for resurgence and Fender seem to be on their game and producing some very competent and attractive models at all price points. PRS are on a creative stretch of their own and doing OK judging by headlines. Gretsch, Rickenbacker and Danelectro also seem to be faring well, perhaps needing a bit of additional cool vibe to secure their future. Rejuvenated brands like Supro and Harmony are aiming to join the ranks as ‘go to’ guitars, while many other familiar names are managing to stay afloat. Acoustically, Martin and Taylor are both actively vying for top dog status with new innovations, which ultimately means some great guitars for the consumer. The last 12 months has seen some small‑scale luthiers go under or simply disappear, which is regrettable but, sadly, not surprising given the volatile international economics of the industry.

In the amp arena, there are three major directions of travel; a) the relentless digital onslaught from the likes of Fractal, Kemper and Line6 among others, b) ranges of very good valve and solid amps from the mainstream names such as Fender, Marshall, Vox, Orange and others, including some faithful reissues of classic models, and c) the continued rise of boutique builders catering for individual tastes in small numbers. We guitarists are, though, a conservative breed. It seems that the valve is dead, long live the valve!

One area where digital is revolutionising sound is on the pedalboard, which is a current ‘big thing’. There are some astoundingly inventive ways of mangling your guitar tone, both in variations of established FX types and some intriguing all‑new creations that take advantage of digital technology. Some exciting products are appearing from the likes of Catalinbread, Strymon, Eventide, Fulltone, Thorpy, Keeley, Electro‑Harmonix and Wampler, to name just a few. If you prefer multi‑effect pedals, then you are likely to have stalwarts like Line6, Boss and Zoom in your sights. Then there are pedalboard switching systems to help you organise your complex myriad of stompers, e.g. the Gig Rig 2 and Headrush. Likewise, the ever‑improving pedalboard power supplies derive from companies such as Truetone, Voodoo Labs and MXR. Looking from the outside, there are some tremendous bits of alluring kit becoming available, way beyond the vision of manufacturers and musicians back in the 20th Century when digital was just starting out. Whatever your budget, the choice, it seems, is yours.

Music publications across the board, including the trade press, are still suffering a seemingly unstoppable shrinkage of their market. Sales of paper magazines continue to dwindle and digital subscriptions are not filling the gap. As a result, high street transactions along with the advertising revenue streams they need to survive are decreasing. As the absolute size of the readership reduces, the risk of becoming uneconomic goes up disproportionately. Strategically, there are few options available and quite what will remain once an inevitable shake‑out occurs remains to be seen. The consequence of this is that the quality of content is likely to suffer in the long term. Music industry journalism needs to adapt, although there are major challenges ahead as people find alternative ways of acquiring the information they need (or, perhaps more worryingly, not bothering at all). Although referring to something slightly different, one is reminded of a whimsical quote from Frank Zappa who suggested that, “Most rock journalism is people who can’t write interviewing people who can’t talk for people who can’t read.” Discuss…

Another area of stagnancy appears to be in the quality of music pervading distribution channels. Video/TV, radio and physical media sales are stagnant at best, while digital streaming is becoming the dominant force. This re‑jigging of supply channels, though, isn’t the issue. Although a sweeping generalisation, it seems that since the turn of the millennium music output has increased in volume and decreased in quality. While this is a highly subjective observation, it is borne out by (vaguely) reliable anecdote across generational divides. There is no doubt that there is some extremely good music being made. However, finding the glittering gems amongst the deluge of dross is difficult and, as a result, the good stuff is constantly battling to reach a mass market, thereby making success a tough task for genuine aspiring talent (rather than vacuous celebrity wannabees!). Financial rewards for artists from streaming services is a travesty and needs addressing before it’s too late. Quite how the tide can be turned to reveal new genre twists and identify the next swathe of outstanding musicians will be a challenge for the 2020s. One can hope that something will happen, as it has always has, it just remains to be seen who, what, when and where it will pop up. Another consequence of generic music produced by generic people is that the desire for genuine instruments will decrease, thereby ultimately affecting sales of guitars.

Getting back to the point, core consumer demand for music gear continues to be resilient, although customers are understandably more discerning and, as a result, potentially more fickle. Reliance on past sales and brand loyalty are continually being chipped away at by targeted marketing and tough rivalry. However, strong competition and the downward pressure on street prices can prove to be a double‑edged sword for price sensitive customers. On the whole, one thing I can easily predict is that the popularity of the guitar will persist no matter what, despite regular prognoses that ‘guitar music is dead’. Quite what the musical landscape will be like in years to come is best left for others to forecast. Whatever happens, it’s going to be an exciting time in Guitarville.

As CRAVE Guitars is based in the UK, it is incumbent on me to mention ‘Brexit’ at this point. There are NO scenarios where leaving the European Union can benefit the country or its citizens. Prices are already increasing, not only because of increased costs and perceptions of risk but also as a result of exploitative selling practices by the unscrupulous trying to secure and bank revenue before the catastrophe strikes. Things are bad enough as they are (remember ‘Rip off Britain’?) and we don’t need any further unnecessary pecuniary pressures. After the severance has occurred and whatever the outcome is of the disastrous ‘deal or no deal’ shenanigans, import barriers, tariffs and currency speculation will affect Britain’s international trade relationships without question. The risk of further recession and national isolation rank high on the concerns of many British businesses. Given the fragile nature of the UK music industry, any weaknesses and threats will be heightened and only those that are able to adapt will survive. Hypocritical UK politicians, pedalling their own prejudices while protecting their personal interests should be ashamed of the damage that will result in the short‑term and aftershocks will continue to impact on the prosperity of the country for generations to come. What is regrettable is that there will be recourse to hold the inept self‑seeking minority accountable for engineering this chaos in the first place and having no idea about how to deliver it successfully. On this basis, I am not optimistic in the slightest. I hope, however, that I am proved wrong. Personally, my view is that there can be no backtracking and we need to get on with making the most of a bad situation. End of whinge!

Repatriation Update

I covered the long‑overdue reunion of a significant proportion of CRAVE Guitars’ vintage instruments in the last article. What I didn’t do is say much about what actually came back. So… if only for completeness, here is the full list of the (42) returnees:

  • 1966 Epiphone Olympic
  • 1966 Fender Coronado II
  • 1965 Fender Duo-Sonic II
  • 1965 Fender Jaguar
  • 1965 Fender Jazzmaster
  • 1965 Fender Musicmaster II
  • 1966 Fender Mustang
  • 1972 Fender Mustang Competition
  • 1977 Fender Precision Fretless Bass
  • 1977 Fender Stratocaster
  • 1983 Fender Stratocaster Dan Smith Era
  • 1972 Fender Telecaster Thinline
  • 1973 Fender Telecaster Deluxe
  • 1974 Fender Telecaster Custom
  • 1988 Fender Telecaster
  • 1983 Gibson Corvus II
  • 1963 Gibson ES-330 TDC
  • 1985 Gibson ES-335 Dot
  • 1982 Gibson Explorer E2
  • 1983 Gibson Explorer
  • 1984 Gibson Explorer
  • 1984 Gibson Explorer Custom Shop Edition
  • 1984 Gibson Explorer ‘Union Jack’ Graphic
  • 1966 Gibson Firebird III
  • 1976 Gibson Firebird Bicentennial
  • 1980 Gibson Flying V2
  • 1975 Gibson Les Paul Standard
  • 1977 Gibson Les Paul Deluxe Gold Top
  • 1989 Gibson Les Paul Custom
  • 1998 Gibson Les Paul Standard DC
  • 2002 Gibson Les Paul Standard
  • 1961 Gibson Melody Maker D
  • 1964 Gibson Melody Maker
  • 1982 Gibson Moderne Korina Heritage
  • 1981 Gibson RD Artist
  • 1965 Gibson SG Junior
  • 1968 Gibson SG Standard
  • 1962 Gretsch 6120 Chet Atkins Double Cutaway Hollowbody
  • 1965 Gretsch 6135 Corvette
  • 1978 Music Man Stingray Bass
  • 1974 Rickenbacker 480
  • 1964 Silvertone 1449 ‘Amp in Case’

Some of the guitars have only been ‘stored’ for a short period of time but many have been incarcerated for nearly 8 years!!! It is these ‘long‑termers’ to which I will probably need to pay most attention in the coming weeks and months. While they were safe and secure, a domestic loft space is definitely not an ideal environment in which to keep vintage guitars for any length of time. The fluctuations in temperature and relative humidity over an extended period are far too great to do them any good at all. Given the circumstances at the time (back in 2011), it was a necessary urgent solution borne out of a severe predicament and I had no practical alternative. I never anticipated that it would take over 7 years to get them all back – I was clearly naïvely deluded in thinking that it would take ‘about’ 6 months at the most to sort things out! Essentially, completely rebuilding one’s entire life from scratch took considerably longer and it has been an extremely arduous journey. Still, we are where we are, none of us can turn the clock back, so one has to be positive, forward looking and take it from here. At least the precious cargo has been rescued and they are now finally back where they belong and, primarily, that is what really matters.

At the moment, the only tangible evidence of the little treasure trove listed above is several stacks of dusty guitar cases. Excitement about the potential is also tinged with an element of guarded apprehension about what will be found when the contents are properly ‘exhumed’ and examined for need of repair and sensitive renovation. If at all possible, any replacement parts needed during restoration will be of the appropriate vintage. That presents a major quandary in 2019-2020. For instance, finding and procuring period‑correct components will be both time consuming and costly. While one could be practical and use modern replacement parts, I prefer to conserve these precious historically significant instruments with genuine components that are as close as possible to the originals as I can find (and afford). Only if that approach fails will I resort to pragmatic use of new stock items. Back in the pre‑recession boom, there was little difficulty in sourcing these useful bits and pieces. Now, however, it has become considerably more difficult.

Not only are vintage spare parts and accessories hard enough to find on the usual hinterwebby platforms, decent vintage guitars and amps also seem to be increasingly scarce, at least in the UK. I’m not sure why this should be. Perhaps people are hanging onto their instruments, perhaps there’s a mistrust/dislike of the usual web sites and the way they are run, or perhaps the post‑recession/pre‑Brexit uncertainty is still suppressing supply. The laws of economics dictate that continued demand combined with a shortage of (finite) supply means only one thing… increased prices. Wading through eBay is bad enough at the best of times but UK sourcing is particularly hard work at the moment. Disadvantageous exchange rates with the USA now seem to be a permanent fixture and, on top of that, CITES is a real bane. In addition, eBay searches are flooded with Japanese items that you just know are bogus. All round it’s not much as much fun as it should be when hunting down scarce ‘most wanted’ artefacts.

I am not treating the repatriation project with any sort of hysterical urgency. The guitars have been exiled for so long that a few more weeks in their new home before I get round to them won’t do any harm. In the first month, I have only attended to 2 out of 42 guitars (1964 Gibson Melody Maker and 1966 Fender Coronado) and I have to be cautiously optimistic that there is no lasting compromise to their integrity. Phew! I hope I don’t get any nasty surprises lurking in the remaining 40 to be uncovered.

Vintage guitars really need to be played. That may be ‘stating the bleeding obvious’ but the difference after a bit of TLC and playing for a few days is phenomenal. There is a transformational change in their playability, sound, feel and looks. I wonder if this may be one reason why some people pick up a (possibly neglected) vintage guitar and find it dull, lifeless and uninspiring. When they magically come back to life again, it is both a relief and a delight. The journey of rediscovering these instruments may well explain why I’m taking my time and not getting very far very quickly. Well, that and the fact that there isn’t a local guitar tech on whom I can rely when more extensive remedial works are required. I know my limitations and any attempt on my part to mess around with repairs and adjustments that are best left to experts would almost certainly be a regrettable mistake.

Another interesting observation is that, while I wasn’t overly attached to some of the guitars all that time ago – a proportion were originally intended to become the staple of a start‑up business – I have now developed an emotional connection to them because of everything I and they have been through over the intervening years. That may be a good thing because I now value them more for what they are than what they may be worth. Also, I simply wouldn’t be able to afford many of them on today’s market, so I’m just glad to have them now. However, it means that I may well have a struggle with my conscience if CRAVE Guitars does become an economic entity and I have to break those newfound relationships. Until that time, the guitar ‘collection’ is an integral part of the family and they are definitely not for sale in the short to medium‑term. My philosophy and attitude mean that the guitars still represent a not‑for‑profit conservation of the musical heritage, rather than any sort of potential gold mine.

As previously mentioned, a pressing priority over the next few months is to provide them with proper accommodation. This means that I need a competent builder to ‘tank’ the cellar and make a suitable home for the guitars. After that, I can possibly start thinking positively about what the future of CRAVE Guitars might one day become. One step at a time.

New in at CRAVE Guitars

So that I don’t fall into the same trap as last year, here’s a quick ‘new arrival’ section. As I predicted back in December 2018, things got off to a slow start this year. In fact, there has been only one purchase in the first 2 months of 2019. Surprisingly, it was an item that was actually on the ‘wanted in 2019’ shortlist.

CRAVE Effects is a relatively modest side venture that runs alongside the guitars and amps. The Cool & Rare American Vintage Electric’ acronym doesn’t actually work 100% in this context because CRAVE Effects comprises a diverse selection of stomp boxes from around the world. Whatevs! I can break my own rules.

One of the ‘classic’ effect pedals that was notably absent was the venerable Ibanez TS‑808 Tube Screamer Overdrive Pro from Japan. This was partly because availability of both the right pedal and the resources needed to acquire it were in short supply. Good ones are few and far between and, when they do come up, they go for silly money. So when an original 1981 TS‑808 turned up on eBay UK for an aforementioned silly price, but arguably not exorbitantly so, it had to be pounced upon. Thus, the notable gap has at long last been duly filled. To think that I could have added another ‘budget’ vintage guitar for the same price as the Tube Screamer puts things into perspective.

As is often the case with vintage Tube Screamers, this example shows typical signs of use (good) but not abuse (bad), so it has just the right amount of mojo, otherwise known as ‘wear and tear’, needed to be confident that it was a safe purchase. Thankfully, apart from a replacement battery snap, it is in all‑original condition and it works very well indeed for a 38‑year old pedal, which is testament to their durability.

As anyone acquainted with my opinionated drivel (or should that be overdrivel in this case?) will know, my heretical views don’t always accord with those of the self‑appointed ‘establishment’. The original TS‑808 is good but I don’t believe it really deserves its insanely elevated and almost mythological status in the minds of many guitarists. Like numerous effects from the late 1970s and early 1980s, it can sound great or grim depending on how it’s used. It is player, guitar, effect and amp dependent, so it needs to be carefully matched in order to make it sound its best. Although new TS‑808 and TS9 reissues are not the same as the old ones, they are still very good overdrive effects. Therein lies a fundamental truth that applies equally for any stomp box made at any time – you pays your money and make your choice. Regardless of my biased view, the much‑imitated and often re‑issued Tube Screamer has become the de facto benchmark for overdrive pedals and there is no getting away from it.

The web site feature on the TS‑808 has already been prepared but, like most gear purchases over the last year, it hasn’t yet been published on the web site. Sigh! Yet another job waiting in the pipeline. Watch this space…

Sign‑off

That’s about it for February 2019. This has been a necessarily short soliloquy compared to many of my verbose outpourings. Inspiration, motivation and time have been in limited supply so far this year and articulating much of any interest at all has been a bit like hard work. Therefore, there is no point in proverbially flagellating a deceased dobbin and it is probably best to stop here for now.

That means that I can get back to the immediate task in hand, which is looking after a few vintage guitars and, hopefully, playing some of them along the way. I’m sure there will be more on this particular topic in coming months. Until next time…

CRAVE Guitars ‘Quote of the Month’: “Conscience dictates that we understand right from wrong. Imagine what mankind might achieve if we could work together rather than conflict, and what good could be done if we stopped the immense and irreparable harm we cause.”

© 2019 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

June 2018 – A Potted History of the Guitar Part IV

posted in: History, Introduction, Observations | 0

Without further ado, let’s get stuck into Part IV of the history of the guitar. As the story was left at the end of the last article during the 1920s and early 1930s, something new was needed to ensure that guitars would not only be able to compete with other instruments in a live situation but also become the catalyst for a musical revolution to mirror what was taking place in wider society. Just in case you were lulled into a sense of coherent continuity, this month’s article is a bit different from what has been covered so far.

This part is presented as part of a whole. If you wish to recap on previous articles in the ‘Potted History of the Guitar’ series, you can access them here (each part opens in a new browser tab):

Please remember that this is written purely for entertainment purposes and is not intended as an academic tome. While I have tried to be diligent in my research, there are undoubtedly improvements that could be made, so corrections and clarifications are genuinely welcomed. This is quite a long article, so I hope you are sitting comfortably.

Needing to be heard

The problem for guitarists in the 1920s was a simple but fundamental and frustrating one. The amount of volume that could be attained from purely acoustic guitar designs had got as far as it was likely to get at the start of the 1930s. Guitarists were still struggling to be heard in noisy live music environments as part of jazz, swing, big band and dance orchestras. Despite the strengths of steel strung folk guitars, archtop guitars and resonator guitars, the lack of volume continued to be a problem for guitarists throughout the early part of the 20th Century. A number of clever innovations attempted to help acoustic guitarists cut through the mix but they didn’t really capture mainstream attention and passed into obscurity, leaving demanding musicians still yearning for louder instruments.

Creative inventors, engineers and entrepreneurs were determined to find a workable solution. Perhaps the biggest game‑changing watershed in the entire history of guitar building was about to take place in America in the 1930s. The transformation depended on coincidental and mutually dependent developments; the magnetic pickup, the portable valve amplifier and its associated loudspeaker(s). Undoubtedly, the amplifier came first, simply because it could be driven by other inputs, such as early microphones, while the pickup followed to take advantage of the opportunity. Logic suggests that the converse would make little sense, as a pickup without some means of manipulating the signal s essentially redundant.

By the end of the 19th Century, early microphones were being used in telephone, broadcasting and recording industries. In 1916, the first condenser microphone was invented and in 1923, the first moving coil and ribbon microphones were developed. Given the timing, it seemed logical to experiment with microphones to capture the sound from acoustic guitars. However, the results weren’t particularly successful and the microphone proved to be a dead end for guitarists at the time. A more practical and reliable alternative was required to capture the physical energy produced by a stringed instrument and convert it into a usable electrical signal that could then be amplified and output.

Before starting to look at the early electric instruments that changed modern guitar music forever, it is worth taking a temporary detour to look at the catalysts that led to the step change. Once the technical inhibitors had been overcome and the various elements combined, electric guitars became a realistic and achievable proposition.

The electro magnetic guitar pickup

By the 1920s and 1930s, the science of using magnetism and wire coils to induce an electric current had been understood for several decades. It would, however, take some ingenuity to apply the various scientific principles involved to overcome the specific practical problems experienced by guitarists of the time. Within this context, we need to go right back to basics as a starting point.

An electromagnetic guitar pickup is basically a passive transducer that uses Faraday’s law of induction, named after English scientist Michael Faraday (1791‑1867), to produce an electromagnetic force. The physical movement of the vibrating steel string of a strummed or plucked guitar disturbs the magnetic field and induces a small voltage of between 100mV and 1V through the coil. This differs from a simple microphone, which works by converting pressure variations in the air (sound waves), into the mechanical motion of a diaphragm, which in turn produces an electrical signal (depending on the type of technology used).

A simple electromagnetic guitar pickup is generally constructed from one or more permanent magnets, wrapped many thousands of times in a coil made of fine copper wire. Most early guitar pickups comprised only one magnet and coil, hereafter referred to as single coil pickups. The weak electrical signal is then passed down an electrical lead to a separate amplifier where the signal is multiplied many times to drive a passive loudspeaker that reproduces the original signal at greater volume.

Unlike a microphone, the electromagnetic pickup does not reproduce the actual acoustic sound waves emanating from the guitar. The natural resonance of the instrument may cause the strings to vibrate in a certain way and this variation is picked up by the transducer, which may explain the differences in sound between two instruments using the same pickup, electrics, amplifier and speakers. As a result, at least in the early days, the characteristics of the pickup combined with the rest of the signal chain probably had more to do with the sound that audiences heard, rather than that of the actual instrument itself. There are innumerable permutations in which the basic components of magnets and wire can be configured to produce different outputs and over the years, pickup designers have used these variations to differentiate their pickups from those produced by others.

Gibson employee, Lloyd Loar had experimented with stringed instrument pickups as early as 1924, shortly before he left the company. Loar attempted to produce an electrical signal from vibrations passed from the strings through the bridge to the magnet and coil. Loar’s work did not lead to a successful product and guitarists had to wait a while longer.

American inventor and musician, George Beauchamp, who had been involved with the National String Instrument Corporation and the development of their resonator guitars, was also involved with another resourceful enterprise at the beginning of the 1930s. He teamed up with Adolph Rickenbacher to form the company was originally called Ro Pat In Corporation, which later became Electro String Instrument Corporation and later still, Rickenbacker, a name that most guitarists will recognise. Ro-Pat-In was instrumental in taking a fundamental new approach to electric guitar design.

Through Electro String, Beauchamp filed a patent in June 1934 setting out his pickup design as part of a complete ‘Electrical Stringed Musical Instrument’. Beauchamp’s ‘horsehoe’ pickup design comprised two ‘U’‑shaped magnets encircling the strings. Beauchamp’s application was granted by the U.S. Patent Office in August 1937. The patent was important because it was for a solid body electric guitar using a magnetic pickup, not just the pickup on its own – the development of the instrument will be covered in the next part of the story so, for now, the focus is solely on the pickup.

Ironically, in February 1936, Guy Hart filed a patent on behalf of Gibson for an ‘Electric Musical Instrument’ and this was awarded by the Patent office in July 1937, just 28 days before Beauchamp’s earlier patent application was confirmed.

Although unknown at the time, another single coil guitar pickup patent was filed in September 1944 by American inventor and entrepreneur Leo Fender. That application was for a ‘pickup unit for instruments’, which was awarded in December 1948. Although not as historically significant as other pickup patents, it was a clear indication of the direction that Leo Fender was heading prior to founding the company that would bear his name.

Another important principle of basic physics caused a significant problem for early pickup designers, and it still does even today. In addition to the desirable characteristic of electrical induction for guitar pickups, electromagnetic coils also act as directional antennae. As far as musical instruments go, this unwanted ‘feature’ means that single coil pickups not only pick up string vibrations but they also pick up interference from alternating mains current used by electrical appliances. Depending on position of the pickup in relation to other electrical equipment, of which there are usually many in a live music venue, the interference manifests itself as a continuous and insistent hum, which is then in turn amplified by a guitar amplifier.

One ingenious solution to the problem of mains‑induced hum was to invent a guitar pickup that still produced a signal from string vibrations while eradicating the interference from nearby electrical equipment. The clever answer was the invention of the ‘humbucking’ pickup, which uses two magnets, each with a coil of wire wound in opposite directions. Electrically induced mains interference affects both coils equally and, because each one is wound in opposing directions, the interference is cancelled out, thereby eradicating (or ‘bucking’) the hum. More importantly, not only do the coils still induce a voltage, they output a stronger signal because there are two coils instead of one. As the problem is all but removed at source, there is no hum to be amplified.

Arguments persist as to who invented the humbucking guitar pickup. Many commentators give the accolade to Seth Lover (1910‑1997), who was an electronics designer working for Gibson at the time and filed a patent in June 1955. Lover’s closest competitor in the race to be recognised for the humbucking pickup came from Joseph Butts, who later worked for Gretsch. Butts filed another humbucking pickup patent some 18 months later in January 1957. It was Butts’ application that was awarded first in June 1959, while Lover’s patent was awarded in July 1959. As far as many working musicians were concerned, the invention was successful and that was all that mattered.

Generally speaking (but not always, especially if obscured by a cover), it is relatively easy to spot the difference between slim single coil pickups and their larger dual‑coil humbucking counterparts. The latter normally have two coil bobbins traditionally mounted side‑by‑side. Within these two broad types, there are many, many different makes and styles of pickup to suit most needs.

Hum is not the only affliction that electric guitar builders have to deal with. All electromagnetic pickups, even those produced today, are prone to audio feedback, which is often heard as an undesirable high pitched shriek or howl. Feedback is a phenomenon called the Larsen Effect after the Danish scientist Søren Absalon Larsen (1871-1957) who discovered it. Audio feedback is caused by a sound loop that exists between an audio input such as a pickup or microphone and an audio output such as an loudspeaker fed by an amplifier. The electrical signal from the input is amplified through a loudspeaker and is then picked up again by the input and so on, continuously. The sound of the feedback is shaped by the resonant frequencies and proximity of the various components in the loop, including room acoustics. Most of the time, feedback is considered problematic and often unpredictable. However many guitarists have learned to harness and control feedback in a positive musical way to create additional sounds.

Some contemporary pickup manufacturers go to great lengths to replicate the authentic tonal characteristics of vintage pickups. One of those widely imitated pickups is also probably the most famous of humbucking pickups. Used on Gibson guitars from the late 1950s, the PAF (Patent Applied For), named after the black sticker on the baseplate, has come to define Gibson’s sound for many guitarists. The PAFs are particularly revered, as they were used in sunburst Gibson Les Paul Standards from 1958‑1960, often regarded as the ‘golden years’ for Gibson.

Today, many independent pickup builders not only pay homage to vintage designs but also strive to create their own distinctive reputation. Third party pickup builders may make OEM (Original Equipment Manufacturer) and aftermarket pickups in a huge range of types. Such companies include Seymour Duncan, Di Marzio, EMG, Lollar and Bare Knuckle, among many others. Pickup choice in the 21st Century is very much down to personal preference and the options are nigh on infinite – very different from the 1930s.

The sounds generated by single coil and humbucking pickups are noticeably different. Not only do single coil pickups tend to produce a weaker signal, they sound thinner and cleaner, while more powerful humbucking pickups tend to sound fatter and warmer. Guitarists noticed this variation and took advantage of the differences to shape their own playing style and develop their distinctive tone. In addition, humbuckers are often considered better suited to overdriving pre‑amplifiers, thereby adding some controllable, distinctive and desirable harmonic distortion, making them popular in higher gain rock music.

By the 1950s manufacturers were commonly using two or more pickups on a guitar for added tonal versatility, initially adding a second or third pickup of the same type, for instance commonly used configurations include 2 humbuckers (e.g. Gibson Les Paul) or 3 single coils (e.g. Fender Stratocaster). Many guitar makers today mix different types of pickups on one guitar to broaden the range of sounds available.

Some pickup arrangements also allow pickups to be engaged in series or parallel or in/out of phase to give musicians a greater number of tonal options. Since the 1970s, pickup designers have enabled the signal from the two coils of a humbucking pickup to be ‘split’ (NB. not ‘tapped’). By using a switch, guitarists may enable a split humbucker to sound either like a traditional humbucker or to emulate the distinctive sound of a single coil pickup. All these various techniques provide guitarists with greater flexibility from their pickup(s).

Simplistically, guitar pickups may also be described either as passive or active. Passive pickups are the basic devices that have been described so far, while active pickups incorporate some form of electronic circuitry in the guitar to modify the signal, normally powered by an on‑board battery. Outwardly, there is often little to distinguish whether pickups are active or not. Putting active electronics into a guitar has been around since at least the 1960s and can range from a simple pre‑amp to boost the pickup signal to elaborate on‑board effects or even low powered amplification.

Since its inception 1930s, the humble guitar pickup has been adapted into many diverse forms. The majority of pickups in the early 21st Century remain passive single coil or humbucking types. However, there have been other pickup innovations along the way diverging from the norm. These alternative technologies include, amongst many other pickup types; hexaphonic (that feed individual string signals to MIDI/synthesizer controllers), piezoelectric (using crystals to induce current), microphonic (converting sound wave vibrations to electricity), electrostatic (using a capacitor to vary electrical capacitance), optical (interrupting a beam of light detected by a sensor), etc.

The understanding of the science behind pickup materials and dynamics between the components has been improved and refined significantly since the 1930s. However, the basic principles behind the passive transducing electromagnetic pickup remain pertinent today and are likely to remain so for the foreseeable future. Magnetic pickups are, by far, the most common type used by electric guitars in the late 20th and early 21st Centuries. This may be about to change.

With the digital revolution, there are numerous innovations occurring today that will lead to radical new pickup designs in the future. Future musicians can expect many new ways of converting the vibrations from humble plucked guitar strings into electrical signals that can be manipulated in ways we cannot yet contemplate. The possibly unstoppable migration from analogue to digital technology will continue. We can only speculate as to how far digital processes will encroach into the hitherto staunchly analogue domain of the guitar. Already, we have seen digital devices that enable the output from a guitar’ pickup to ‘model’ other types of guitar and even other instruments by modifying the signal digitally. We have also seen guitars as being a source trigger for external synthesis and various guitar synths have been around since the 1970s. It seems somewhat ironic that the digital age is enabling ever more accurate simulations of the earliest analogue pickups including the original’s crude and accidental inconsistencies.

While this section of the story is about guitar pickups, it is worth remembering that pickups have also been used successfully on many other types of stringed instrument.

Once the concept had been proven, the next step was to apply actual real‑world pickups in a practical way. There were essentially two methods of implementing an electromagnetic pickup for use on a guitar. One way was to add a pickup to existing acoustic instruments and the other was to invent an entirely new type of guitar with the pickup as an integral part of the design. How these two approaches came about will be covered in the next part of the story.

The pickup on its own, however, is of little use in isolation. Another crucial part of the equation was to take the weak signal from the guitar’s pickup and manipulate it electronically to make it much louder, which is where a completely different solution was needed.

The electric guitar amplifier

Possibly the major challenge with introducing guitar pickups was to turn the tiny voltage produced by the pickups into a sound that provided practical real‑world volume and tone for working musicians playing in noisy bands on the road.

The essential piece of equipment actually comprises two crucial components, the electrical amplifier and one or more loudspeakers. Amplifiers largely fall into two broad categories – either as discrete units comprising the electronics in a ‘head’ unit with loudspeakers installed in a separate cabinet, or with both amplifier and speaker(s) integrated into a single ‘combo’ amp. It is worth looking at the origins of both the electronics and the loudspeaker separately.

For travelling musicians from the 1930s on, amps also needed to be portable, so size and weight were particular considerations, as was electrical safety, durability and reliability. In addition, some degree of industry standardisation to enable interchangeability between instruments, electronics and venues was important.

The Amplifier

In the early days, amplifying a signal from a pickup was all that a guitar amp was really required to do. Controls were very basic, usually just a single input channel with a volume and, maybe, a tone knob. It would take some time before more flexible electronics were added to these basic amplifier circuits. Nowadays, the diversity of amps ranges from the very simple to the incredibly complex. The latter often including, just for starters, multiple switched channels, gain controls, effects loops, digital modelling alongside advanced EQ, flexible on‑board effects and digital interfaces. However, the fundamental principles of amp utility haven’t really changed that much since amps were first invented in the 1920s and when guitarists started to use them in the 1930s.

Put very simply, an amplifier is made up of active electronics that are designed to take an input signal, multiply it many times in strength and output it to a loudspeaker at a volume that is considerably louder than the original input. The electronics of an amplifier comprise essentially two discrete parts, a pre‑amp that controls the incoming signal and shapes it ready to be boosted and output by the power amp section that then drives the loudspeaker(s). It is these two amp sections that determine the overall character and volume of the audio output.

Amplifier output is usually measured in watts and provides a crude indication of power output (volts x amps = watts). The relationship between watts and sound pressure levels heard by the human ear is logarithmic. Generalising, it takes ten times the output power in watts to double the perceived audio volume. In addition, it takes considerably more amplifier power to reproduce low-frequency sound, especially at high volume, so bass amps tend to have higher power output ratings.

While early amplifiers were configured to the environment in which they were most likely to be put, such as practice, studio or stage amps, many modern amps use various techniques to minimise this artificial distinction, such as master volume controls, power attenuators or circuits used to modify amplifier stages to suit.

Up until the 1970s, thermionic valves – also known as vacuum tubes – were a principal electronic component and one that contributed significantly to both the power and sonic character of the amplifier. A valve is a relatively simple device used to control electrical current between its electrodes. The first valve was invented in 1904 by English electric engineer John Ambrose Fleming (1849-1945).

At its most basic, a valve comprises an external glass container used to maintain a vacuum is attached to the valve base. Inside the valve there is a heater, an electron‑emitting cathode/filament and an electron‑collecting anode/plate. Electrical current, in the form of negatively charged electrons, flows through the vacuum in one direction only from the cathode to the anode. An electrical grid can be used to control the current and is the one often used for amplification because the grid can be used to vary the number of electrons reaching the anode and, thereby, controls the amount of gain. Valves are often described by the number of electrodes, for instance; diode, triode, tetrode  or pentode valves (2, 3, 4 and 5 respectively). The humble valve has been used in many applications, such as amplification, rectification, switching, oscillation, and display.

Valves come in many shapes and sizes and vary according to the function they are required to perform in the amp stages. Generally speaking, pre-amp tubes tend to be smaller, while power amp valves tend to be larger.

There are numerous alternatives and variations of valves and there isn’t room to cover the range of technical differences. Thankfully, there has been a degree of commonality in amplifier design over the decades. Typical valves used in pre‑amps include models such as the 12AX7/ECC83. Typical valves used in power amps include models such as the EL-34, EL-84, KT66/77/88, 6L6/5881 and 5150. Valves impart a characteristic ‘natural’ sonic signature and tend to be sensitive to a guitarist’s playing dynamics, which is why they are still widely favoured by many musicians to this day. While technically outdated and obsolete, there is a notable modern‑day industry built around valve production, amp manufacturing and valve amp maintenance.

The valve is the technological precursor to modern semiconductors. Semiconductors are often made of silicon, although they can be made from other materials, such as germanium. A transistor is a solid‑state semiconductor that roughly performs the same function as a valve and is commonly used for amplification. Transistors are smaller, cheaper, lighter, run cooler, are more reliable and more resilient than valves. Some manufacturers produce hybrid amps that aim to take the best characteristics of both valve and transistor technologies.

Taking things even further away from archaic valve technology, electronics using complex digital microprocessors are commonplace. Not only can DSP (Digital Signal Processor) chips produce their own sounds but also they enable a single unit to model a multiplicity of amplifier models that would be impossible using traditional technology. In addition, they can also emulate multiple effects, speaker cabinets, microphone placements, studio interfaces, and so on. Reliable and robust digital processing amps able to be used equally well at home, in the studio and on stage are once again attempting to usurp territory previously held by archaic analogue amps.

Specialist amps are made to make the most of other, albeit similar, electric instruments. For instance, electro‑acoustic guitars (acoustic guitars with pickups) produce a wider frequency range and tend to be ‘cleaner’ sounding than electric guitar amps, which has led to increasingly elaborate amp electronics to cater for the particular needs of acoustic guitar players. Bass amps and speakers are also engineered specifically to provide for the demanding amplification used by bass guitarists. There are no hard and fast rules, the lines are not always clearly drawn and there is inevitably some interchangeability between the general types.

One of the keys to success is to match the characteristics of the amplifier stages to the loudspeakers, so it is worth looking next at the humble loudspeaker and the important part it plays in the guitar sound’s signal chain.

The Loudspeaker

The latter part of the 19th Century was ripe for invention in the field of sound reproduction. As with other sections, only a few of the key milestones can be covered here. Prior to the invention of the modern loudspeaker, megaphones and bulky ‘radio horns’ had been used to increase acoustic volume. However these proved impractical because of their size and weight, limited frequency range and low sound pressure levels.

German teacher, Johann Philipp Reis was, perhaps, the first to develop a rudimentary type of experimental electric loudspeaker in 1861. Alexander Graham Bell was the first to patent his loudspeaker design in 1876 for use in his telephone, shortly followed by Ernst W. Siemens who patented his ‘magneto-electric apparatus’ in 1874. Thomas Edison and Nikola Tesla were also experimenting with sound around the same time. By 1898, Horace Short was working with compressed air drivers and Oliver Lodge was developing a ‘dynamic’ speaker using magnets and moving coils with horns to amplify sound. Danish‑American engineer Peter L. Jensen (1886-1961) is often cited as co‑inventor of moving coil speakers in 1915 and he started applying the technology for use in real world situations. Jensen founded his company, Magnavox, in 1915 to market products for telephones and public address (PA) systems. Magnavox is now part of the massive Philips corporation.

Things changed considerably in the 1920s with the introduction of the first amplified moving coil loudspeaker using a conical paper speaker diaphragm, which was invented in 1925 by Edward W. Kellogg and Chester W. Rice, both of whom worked for General Electric in New York, USA. Their research was important as it established both the principle of the amplifier to boost a signal and a speaker able to reproduce a wide and uniform frequency range. Rice filed a patent for the electrodynamic direct radiating ‘loud speaker’ in 1925, which was awarded in April 1929. Their speaker was introduced to the market under RCA’s Radiola brand in 1926.

Early speakers used powered electromagnets, as permanent magnets were scarce at the time, although Jensen released a fixed magnet speaker in 1930. Lightweight Alnico alloy magnets became available after WWII, making the technology more accessible enabling further innovations to take place. Other inventions along the way included, for example, 2‑way systems using a crossover to separate frequency bands (1937) and coaxial speakers (1943). Once the concept of the moving coil speaker had been proven in practical applications, it has become the de facto standard within the music industry for nearly a century.

The loudspeaker, as we know it today, is essentially a mechanical electroacoustic transducer that serves the opposite function to a microphone in that it converts an electrical signal into sound waves. A traditional moving coil speaker is passive in that it relies on an already amplified signal being fed to it and it doesn’t require its own power supply. The incoming amplified signal is fed into a coil of wire, known as the voice coil, suspended between the poles of a permanent magnet. The voice coil is attached to the apex of a conical diaphragm known as a speaker cone, originally made of paper. The outer edge of the cone is mounted within a fixed metal chassis, usually within a cabinet. The electrical signal makes the voice coil move back and forth rapidly within the magnet thereby pushing on the cone to produce sound waves. The more air that the moving speaker cone displaces, the louder the perceived sound is. Different sizes and types of speaker are used to deliver different sound frequency ranges. Generally, larger speakers are used to deliver lower bass frequencies and smaller ones used for higher treble frequencies.

Loudspeakers are usually attached to a flat panel (baffle) with circular holes cut into it such that the sound waves produced by the speaker cones can escape directly into the listening environment. The baffle with its speaker(s) is normally mounted inside either an open‑back or closed‑back wooden cabinet.

Like amplifier outputs, speaker output is usually measured in watts, which is the electrical power needed to drive the speaker. More watts generally, although not always, indicates greater volume. Like all electrical devices, a speaker provides some opposition to the signal being fed into it, called impedance, measured in ohms. Some speakers are ‘hard to drive’ and have a low impedance, which means that it requires greater current from the amplifier to result in the same output level than a high impedance speaker. As a result, it is important to match a speaker’s characteristics to the amp that is driving it.

Most loudspeakers, even those produced today, are relatively inefficient devices with only about 1% of the electrical energy being converted into acoustic energy. Most of the remaining energy is converted into heat. The sensitivity of the speaker describes how much relative electrical energy is converted into sound pressure level, measured in decibels.

The other important factor for loudspeaker performance is its frequency response. Human hearing generally covers the range 20-20,000 Hertz (cycles per second). People’s sensitivity to frequencies is not uniform and it varies depending on pitch. Human hearing is usually most sensitive in the 2,000-4,000 Hertz range.

Famous names in the field of loudspeaker manufacturing today include Celestion, Jensen, Weber, Electro Voice, JBL, Bose, Fane, Altec Lansing, Mackie, and Peavey amongst many others.

Despite its many drawbacks, the moving coil loudspeaker was (and generally still is) the most effective mechanism for the job and they remain in very wide use today. Speakers come in a multiplicity of shapes and sizes and are used in so many different ways. However, like the pickup and amplifier, the basic principles of speaker design can be traced back to the early part of the 20th Century.

 

Guitar Amps

Initially, bulky battery‑powered valve amps and speakers were used in PA systems and in movie theatres of the time. Because of their bulk and relative fragility, these early systems tended to be fixed installations. From c.1927, portable AC mains‑powered amps became available and musicians started to adopt the technology.

In 1928, Stromberg‑Voisinet advertised the first electric instrument and amplifier package. However, it was not a commercial success and no verified examples exist today. In 1929, Vega introduced a portable amplifier to be used with banjos.

It wasn’t until 1932 when the Electro String Instrument Corporation – later to become Rickenbacker – was formed to bring the electric guitar to market that things really took off. Electro launched a ‘high output’ guitar amp to accompany their new solid body electric lap steel guitars, as Hawaiian music was highly popular at the time across America. The first commercial solid bodied electric guitar and amplifier made by Electro String essentially established the format for early combo amps comprising an electronic amplifier mounted inside a wooden cabinet along with a speaker. The new combo amp also had a carrying handle to make it portable and, shortly after, the company added metal corners to protect the cabinets in transit.

In 1933, Dobro introduced the first guitar amp combo with twin 8 inch speakers. By around 1935, the demand for amplified electric guitars became unstoppable and the electric guitar music revolution had begun. Other companies such as National, RCA Victor, Audio-Vox, Vivi‑Tone, Premier, Vega, Kay, Valco and Volu‑Tone, promoted their own amps to musicians, with varying degrees of success during the 1930s and 1940s. Gibson was also experimenting with amplifiers in the early 1930s although none were made commercially available at the time. Most of the early valve amplifiers were low powered by today’s standards, usually less than 10-15 watts and using small speakers, often of 10 inches or less in diameter.

In 1938, American electronics technician, Clarence Leonidas ‘Leo’ Fender (1909-1991) established Fender Radio Service to repair a wide variety of electronic equipment. He found that musicians would come to him for PA and amplifier repairs and rentals. Seeing the potential of the music industry and started to focus more on musical equipment manufacture. Fender began a short‑lived venture in 1944 with Clayton ‘Doc’ Kauffman, a former employee of Rickenbacker called K&F Manufacturing Corporation with the intention to build Hawaiian lap steel guitars and amplifiers.

In 1946, after Kauffman and Fender parted company, Leo founded the company with which he will forever be associated, Fender Electric Instrument Manufacturing Company, based in Fullerton, California. Shortly thereafter, they introduced the first guitar amps carrying the Fender name. Early Fender combo amplifiers included the Fender Princeton (1947-1979) and Champion 800 (1948-1982).

In 1952, shortly after Fender introduced their Broadcaster guitar which would become the legendary Telecaster, the company introduced what would be, perhaps, its most celebrated combo amp, the famous Fender Twin. The Twin moniker derived from its dual 12 inch speakers. The Twin has been released in many versions over its long history, with its power output ranging from its original 25 watts to a high of 135 watts in the late 1970s. The perennial Fender Twin remains in production today and has become an industry standard.

Meanwhile, based in Kent, England Tom Jennings (1918-1978) founded British company Vox in 1947 to produce musical equipment. It wasn’t until 1958 that Vox released its first guitar amp, the 15‑watt AC15. A year later, at the request of The Shadows’ guitarist Hank Marvin, Vox introduced its most famous model, the AC30, intended to compete with America’s powerful Fender Twin amp. The AC30 proved to be a very successful product and in updated form, it remains in production today.

It wasn’t until the 1950s that mass produced guitar amplifiers really became commonplace and incorporated many of the features now expected from an amp including, for instance, multiple tone controls, tremolo and reverb.

In addition, contemporary popular music of the time was developing rapidly and guitarists began to experiment by overdriving their amplifiers to distort the guitar’s sound at much higher volumes. From the mid‑1960s guitarists sought to control the level of overdrive and distortion (also known as clipping) as a creative tool. One particular characteristic of natural valve distortion is that clipping also tends to compress the signal as the volume is increased, meaning the output tends to sound ‘thicker’, rather than louder, emphasising the guitar’s sustain.

Guitarist Dave Davies of English band The Kinks is often credited with popularising guitar distortion. On one occasion, Davies himself admitted to slashing the speaker cone of his Elpico AC55 ‘little green amp’ with a razor blade out of frustration and in the process of doing so, he made it sound distorted and nasty. The Kinks’ song, ‘You Really Got Me’ (1964) is often cited, rightly or wrongly, as the first hit record featuring heavy guitar distortion (using a Vox AC30).

The search for new guitar sounds in the 1960s helped to ignite the drive for compact guitar effect pedals, initially with simple fuzz and wah effects. A whole industry developed during the late 1960s and 1970s including brands such as Electro‑Harmonix, MXR, Maestro, Boss and Ibanez, amongst many, many others. Effects have ever since been used to complement guitars and amps as an integral part of a musician’s signal chain. The market for effect pedals has grown into a massive industry in its own right.

The development of guitars, amps and popular musical styles of the 1950s defined the template on which succeeding generations of guitarists would build incrementally. Many modern amps and amplifier innovations hark back to the best examples of this ‘golden’ period. Driven by the success of the 1950s, particularly the popularity of Fender amps, the quest for more volume seemed unquenchable. The first 100 watt amps were made by Leo Fender for surf guitarist Dick Dale, while Jim Marshall of legendary British amplifier manufacturers Marshall did the same for Pete Townshend and John Entwistle of rock band The Who.  Dr. Jim Marshall OBE was affectionately nicknamed, ‘the father of loud’.

High power, high gain valve guitar amps became the norm at the end of the 1960s and into the 1970s. It was not uncommon to see large stages filled with gargantuan ‘stacks’ of loudspeaker cabinets powered by banks of high powered amps. Marshall is the brand most associated with the classic guitar stack, which at its simplest comprises a 50 or 100 watt amp on top of two 4×12” closed back speaker cabinets, thanks again to Pete Townshend of The Who as well as the likes of Jimi Hendrix and Eric Clapton. The guitar stack has since become inextricably linked with hard, heavy and metal rock music. Music and its essential components very much reflected the cultural and social changes of the times.

There have been several technological challenges to the humble valve. A concerted trend away from vacuum tubes towards solid state transistor amps occurred in the 1970s, led by companies like Roland, Peavey and H/H. Other manufacturers adopted a best‑of‑both‑worlds approach by making hybrid solid state/valve amps, led by Leo Fender during his time with Music Man.

Arguably, Fender, Marshall remain the two predominant and recognisable amplifier brands and, respectively, have come to define the ‘American sound’ and ‘British sound’ respectively. Notably, unlike Fender, Gibson has never had much commercial success with building guitar amps, despite producing some credible models along the way. There are now a myriad of other amplifier manufacturers including famous brand names such as Mesa Boogie, Peavey, Ampeg, Randall, Rivera, Bogner, PRS and Supro in America, and Vox, Orange, Blackstar, Victory, Hi-Watt and Laney in the UK. Outside the USA and UK, there are many successful brands including Hughes & Kettner, Engl, Line6, Roland, Yamaha, BOSS, etc. In order to keep production costs down, many budget models are now produced in the Far East, while the majority of small boutique amp builders cater for the high‑end, being manufactured in limited numbers in America and Europe.

Many other famous brand names have passed into history, such as Traynor, Sunn, Multivox Premier, Univox, WEM/Watkins, Sound City, H/H, Selmer, Cornford and Carlsbro although, to be fair, some of these continue to operate in some form or other and may well be rejuvenated at some point. There are far too many brands, past and present, to mention here.

Ironically, there is increasing interest in capturing the retro sound and looks of the earliest guitar amplifiers. Many companies are now recreating classic analogue models of the past, often incorporating modern adaptations for reliability, safety and convenience to meet the demands of today’s guitarists. There are many boutique amp builders looking to take the best of old and new and present something different from the current mainstream manufacturers.

At this point, no article focusing on guitar amps would be complete without mentioning Dumble amplifiers. Dumble amps are made in very small numbers by Alexander ‘Howard’ Dumble in L.A., California, often by request of well‑heeled professional musicians. The Dumble Overdrive Special is widely regarded as the zenith of limited production boutique amps and, as a result of their quality and rarity, new or used examples have gained almost mythical status and demand extremely high values on the open market.

Despite the remarkable sustained popularity of valves, digital modelling technology is now making major inroads into the tube’s traditional territory. As the technological advances behind digital modelling processors that began with the iconic Line 6 Pod through to ever‑improving digital advances from companies like Fractal and Kemper. The audible difference between the ‘antiquated’ originals and modern digital recreations is rapidly diminishing to the point where professional musicians see a competitive advantage in moving to a digital platform.

Despite stiff competition from solid state and digital circuits, the valve guitar amp currently remains the de facto standard for many discerning professional guitarists, despite the decidedly old-world technology involved. It will be interesting to see how long genuine valve amplifiers will continue to prosper in the face of the digital revolution. Only time and hindsight will tell. It is likely that valve, analogue solid state and digital technologies will be able to coexist for many years yet.

Get connected

Guitars need to be connected to an amp in order to work, often with effect pedals in between. Before wireless and/or digital technology takes over completely, the venerable guitar lead has been the necessary link between input and output since the 1930s. At each end of a traditional interconnecting lead is a remarkable piece of analogue kit that most guitarists rarely think about but cannot live without. Similarly, guitars, amps and effects also have the other part of the same connection.

The essential connector in question is the ¼“ (6.35 mm) jack plug and its associated socket, which originally dates from c.1878. The first jack connector was invented by George W. Coy and was used for the first commercial manual switchboard at the telephone exchange in New Haven, Connecticut, USA. It is astonishing that, after nearly 1½ centuries, this enduring piece of industry standard equipment is still in ubiquitous use today, long after it became obsolete in telephone systems.

End of Part IV

This has been a self‑contained article that departs from the usual topic of guitars per se. While it might seem a lengthy, in‑depth examination, it only just scratches the surface. As I don’t have the space, knowledge or resources to write comprehensively on the subject, I highly recommend that readers wanting to delve into the historical detail take a look at the innumerable resources available on the ever‑present hinterwebby thing. NB. Credit to all original photographers for images used from Google Images.

Arguably, without the complementary inventions of the electromagnetic pickup, the dedicated valve amplifier and the moving coil loudspeaker, the revolution in guitar technology that started in the 1930s and which really took off in the 1950s would not have been possible. It is notable that the scientific principles underpinning today’s electric guitars are still relevant nearly a century later. It is, at least to me, remarkable that, technically, we haven’t really evolved a great deal over the intervening decades. Advances have been incremental refinements, rather than ground breaking. Digital technology may change all that. Watch this space.

At long last, in Part V, the story will finally unleash the breakthroughs that led directly to the early electric archtop and solid body guitars. The next revolution in guitar music making was about to happen. Who could possibly have anticipated the impact that the congruence of the three seemingly innocuous bits of music technology covered above would have when brought together.

I hope you have enjoyed the journey thus far and thank you for reading. I also hope that you’ll come back and join me on the next part of the guitar’s long journey to the current day. Time to get some vintage gear out and plug in. Until next time…

CRAVE Guitars ‘Quote of the Month’: “Excess in any form does not indicate wisdom; rather it evidences the lack of it”

© 2018 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

October 2017 – What Qualifies As A CRAVE Guitar?

posted in: Introduction, Observations, Opinion | 0

When canvassing ideas for this month’s article, I was asked why I don’t feature bass guitars to the same extent as the 6-stirngers. I did point out that CRAVE Guitars is already home to Fender Precision and Music Man Stingray basses. However, such simple questions tend to switch on my stream of consciousness. Not content with answering just this question, I thought I might as well address the similar query I have been asked about acoustic guitars as well as other instruments, accessories, merchandise and even non‑guitar‑related stuff! There are not many pictures this month, as the narrative is mainly explanatory.

The short and simple answer is contained in the acronym C.R.A.V.E. (Cool & Rare American Vintage Electric) Guitars so, if that satisfies your curiosity, you can safely stop reading now. For the masochists out there, a little (!) more exposition is required; sorry.

Expanding the acronym is, however, probably a good place to start, so let’s begin with perhaps the most problematic letter…

C is for Cool (Adj.)

For starters, this has nothing to do with temperature. The cool I am talking about is a very subjective, value-laden word with many subtle and indefinable nuances. In its colloquial context, it can mean ‘excellent’ or ‘alright’, as well as ‘fashionable’ or ‘hip’. Slang dictionaries also cite ‘awesome’ or ‘trendy’. These all seem to me to be both superficial and insufficient when trying to convey what I understand cool to mean. To make it easier, perhaps, these adjectives convey a bit more relevance if suffixed with the word ‘dude’.

In relation to the world’s favourite musical instrument, there are the mainstream guitars, most of which have an inherent level of cool anyway and, as you are reading this article, I don’t think I need to state the bleeding obvious, especially where vintage is also a contributory factor (see ‘V’ below). It is, perhaps, the more unusual guitars, which to me radiate cool. Cool transcends simple descriptions such as character or quirkiness.

How on earth does a guitar become and stay cool, and is there a standardised unit of measurement to quantify just how much cool something has? Quite simply, it simply isn’t that simple. For a guitar to be cool it has to exude some sort of cachet or ooze some sort of wow factor. It may have some quintessential ingredient that makes it irresistibly, achingly desirable to those in the know. Things that are cool are utterly seductive despite any objective rational thinking to the contrary (it may be non‑PC but the same goes for women!).

What one person thinks of as cool can be a complete anathema to someone else, while another person may be completely oblivious to it. This suggests that cool is therefore intrinsically a very personal thing. The fascinating thing about cool is when there is an unwritten collective agreement and a shared understanding that something is more than it appears to be on the face of it. Cool, to me, is therefore an unconscious state of mind that has no palpable embodiment.

Sustained cool that is appreciated by like-minded people can lead to a cult status amongst a relatively small proportion of the population, which everyone else completely fails to grasp. Cool therefore also has a degree of exclusivity. Cool cannot be a universally accepted characteristic; it will always be appreciated by the few and ignored by the many. If something becomes popular on the mass market, it automatically ceases to be cool.

Last month, I mentioned the Fender Bronco, a modest single pickup offset ‘student’ guitar that languished in the vintage guitar doldrums until Alex Turner and Arctic Monkeys burst onto the scene. The band was considered cool and the instruments that they used suddenly became cool simply by association. Consequently, the broad appeal for the Bronco coalesced pretty much overnight. Broncos are still cool and attract vintage guitar market values that were unheard of before the band came to prominence. There are plenty of other examples; for instance, would the humble Danelectro 3021 be the icon that it is today without Jimmy Page or the Airline J.B. Hutto be so sought after if not for Jack White?

The transferable phenomenon suggests that cool by association can be infectious. Cool is, however, not physical or perpetual, as it can disappear just as quickly and inexplicably as it appeared in the first place. Furthermore, you cannot make cool, sell cool, buy cool, or pass something off as cool if it isn’t. It therefore exhibits an unusual characteristic of being both intangible and valuable at the same time.

CRAVE Guitars isn’t about what I think other people may like, it is primarily about what I like. I wouldn’t be arrogant enough to try to tell you whether CRAVE Guitars’ instruments are cool or not, that is for you to decide for yourself. I just hope that I have a certain taste that others can appreciate and relate with. However, just for the record, I think they are pretty darn cool individually and, perhaps more importantly as a ‘collection’. I try to raise awareness of some interesting guitars (and amps/effects) and then pose some questions to challenge broadly held preconceptions. Perhaps you might make the irrational shift of ill‑informed choice and agree with the dude (or not, I sure ain’t gonna argue!).

R is for Rare (Adj.)

You’d think this would be obvious… but there is more to it than that. Rare in this context doesn’t actually mean that they are all genuinely scarce in absolute terms. By rare here, I mean that they are limited in number and therefore finite because there cannot be any more new guitars for a certain model from a certain manufacturer for any given year. This is an undeniable fact.

By rare, I’m also suggesting that each one is essentially irreplaceable. If a vintage guitar is destroyed or dismantled, there is a unit reduction in the total number of that model that will ever be available. Whether there were only ever just a handful or many thousands of a particular model produced, there will only be a certain number of each guitar in existence that can feed the vintage guitar market now or in the future. Newer instruments will eventually become vintage but these will be additional to, not substitutes for, what went before.

In addition, each vintage instrument will now be absolutely unique in its own way. Several or many decades of (ab)use bestow certain vestiges of age that are individual to that instrument and which cannot be reproduced (sorry, relic fans). It is this distinctive and natural aging that gives an instrument its uniqueness. Even better if guitars have some sort of genuine story associated with them (or sense of mystery if not).

I should also say that rare in this context does not imply value – there are many other characteristics in addition to rarity that dictate whether a guitar is valuable or not. None of CRAVE Guitars’ instruments are truly valuable, sadly, I wish they were. However, some guitars are rarer than others and therefore have a degree of interest associated with them purely because there are not many of them to go around. Others were mass produced at the time and remain plentiful on the vintage market but only for the time being, as attrition will inevitably occur. Just because something is (relatively) abundant, it doesn’t diminish its appeal.

& – At his point, I might as well comment on the ‘&’ in the CRAVE acronym. It doesn’t mean that every guitar is Cool AND Rare. These adjectives are not mutually exclusive. To be honest, a title where the ‘&’ means ‘cool and/or rare; possibly one or the other, perhaps both or maybe neither’ doesn’t make any sense. It is therefore not a qualifier; it is simply a necessary vehicle of the English language, so get over it grammar pedants (say I hypocritically).

A is for American (Adj.)

You might also think that this criterion is straightforward and, of course, it isn’t. Some guitars in the CRAVE family are all-American, which makes things simple. Some, however, have original materials and/or parts imported from other countries. As far as I am aware, none of my guitars (or basses) were wholly manufactured outside America.

I would actually argue that there have been very few instruments that are actually 100% American so, as with other factors, it is all a matter of degree. So we have to start with the premise that ‘American’ implies a significant but not necessarily total part of the process of producing guitars.

It isn’t just that they are designed by American-owned companies. Danelectro, for instance, has its headquarters in the USA, designs its instruments in the USA and manufactures them in China. Other American firms may import the key elements to be assembled and/or QA’d in the States. Does this make them American? I would argue in both circumstances that it doesn’t. To make things easier, I don’t believe that there are any non-American companies that manufacture in the USA for all sorts of political, social, economic, legal and environmental reasons.

What about some of the key parts of a guitar that customers demand and expect? For example, could a guitar with a Brazilian or Indonesian rosewood fingerboard or a Honduran mahogany body genuinely be called American? In this instance, I believe that it can, as this refers to the source of raw materials, not the manufacturing process. The same applies to hardware, e.g. German tuners and bridges, Mexican switches and Japanese potentiometers. We have to accept that American guitars are partially imported in one way or another.

American trade rules were/are very strict about what items can carry the ‘Made in U.S.A.’ label. I won’t delve any deeper into this thorny issue in this article. Suffice to say that, as far as I am concerned, as long as it complies with the definition imposed by the federal USA government, it is ‘American’.

I have often been asked why I don’t go for guitars from other regions such as Europe or Asia. There are some fantastic instruments from non-American territories (see the CRAVE Guitars article from August 2017 – ‘A Peak into the Pandora’s Box of Guitars’ → Read here). For now, to open the flood gates to global guitar collecting would, I believe, dilute what CRAVE Guitars is all about. Also, I just couldn’t cope with it all – it would be way too much for such a small enterprise. For now at least, integrity of the American ‘collection’ is paramount.

Where I do consciously blur geographical lines is in effect pedals where European and Japanese pedals qualify as part of the ‘family’. Why? Simply because they are such an integral part of the British/American music scene from the birth of rock ‘n’ roll onwards. Plus, there are so many global cool and rare effects that it doesn’t make practical sense to be strictly exclusive. As effects are not the primary focus of CRAVE Guitars, I can be a little more lenient. That’s my excuse and I’m sticking to it. Should I need to liquidate funds though, the non-American effects would be at the front of the queue.

At the moment, my vintage amps are strictly American, although I have been tempted by vintage English amps from, for instance VOX, Marshall and Orange, although less so WEM, Hiwatt and Laney. Perhaps it’s because I started playing electric guitar in the 1970s, I also have a soft spot for vintage solid state amps such as H/H from England and Roland from Japan, so I’m not a complete valve snob. I may also be tempted to blur the lines here one day but not for now. There are plenty of great American amps to admire. One difficulty is that they are just too difficult to import and adapt for UK mains supply, let alone maintain. To be honest, I also don’t have space for a lot of amps, so that makes things simpler.

V is for Vintage (Noun/Adj.)

I have covered the various definitions and interpretations of what might constitute ‘vintage’ in relation to guitars before, so I won’t reiterate those discussions here.

Essentially, there is no clear start date for what might become a CRAVE Guitar. Perhaps the early‑mid 1930s might be a legitimate starting point, representing the dawn of electric guitars. However, if someone were to offer me an early 1900s Gibson Style O acoustic archtop or a 1920s National acoustic resonator for instance, I am not going to turn either of those down! Hint, hint.

The end point is necessarily arbitrary. I tend to think of mid-late 1980s as the general cut‑off for many reasons. Anything from 1990‑on is of personal interest, rather than something eligible for CRAVE Guitars. I have retained a couple of modern Gibsons that I use as modern benchmarks and reference instruments to compare with older guitars (and for sentimental reasons). I no longer have any modern Fenders, although I’d like a modern Stratocaster or Telecaster for comparative purposes. Being purely pragmatic, I generally focus on electric guitars from the 1950s to 1980s inclusive – at the time of writing, the earliest is 1959 and the latest is 1989 – a period spanning just 40 years which, in context of guitar history, is nothing at all and may prove to be too restrictive in the future. For now, though, there are plenty of vintage guitars on the market made in those four decades from which to choose.

There is a bigger question about whether vintage is ‘better’ than new. This is not the time for such a complex discussion. However, for instance, in a blind test where touch and sound are the only stimuli, whether a guitar is physically old actually adds anything to the overall music‑making experience or not is debateable. New guitars can be made to look, feel and sound old but, no matter how good the craftsmanship, they cannot actually BE old.

Much also depends on the use to which a guitar will be put. For most working musicians, reliability and durability are probably far more important than age, especially in a live concert environment where the subtle nuances of vintage tone can be completely lost. A gigging situation is also environmentally demanding, never mind the practical risks of taking a valuable and irreplaceable vintage instrument on the road. In principle, modern guitars are in so many ways a much more appropriate solution than their vintage counterparts, particularly for the professional musician. Personally though, modern guitar ownership is no longer for me and what I do, so my focus is for older, lived-in but not worn out instruments.

E is for Electric (Adj.)

As far as acoustic guitars are concerned, sorry, but they just don’t do it for me. I don’t know why. This applies equally to nylon strung classical guitars and steel strung acoustics. Perhaps it’s the sound, perhaps it’s the playability, or perhaps it’s the aesthetics. To be honest, my knowledge of acoustics is very slim compared to their electric counterparts, so I may be missing something obvious in terms of appeal.

I acknowledge that without the acoustic guitar, we wouldn’t have electric guitars as we know them, so the historical significance is fully understood. I am interested in the acoustic guitar’s position in musical antiquity and I am writing about that as a separate piece of research. However, given a choice of picking up a comparable acoustic or electric, the latter would win 9 times out of 10. Personally, I like to plug my guitars in and experience the diverse sonic pleasures of an electric guitar being used for its intended purpose. For recording or stage use, I find microphones for an acoustic guitar a complete pain, whereas I can just plug in an electric, so the latter also wins on practicality.

I often play electric guitars unplugged when practising or noodling. An unplugged electric gives a good indication of the natural resonance of the ‘old wood’. It also focuses the senses on playability and ergonomics. I might suggest that a good electric guitar will come across as good when it is played either acoustically or plugged in. However, vintage electric guitars really come into their own when driving a vintage valve amp, perhaps with the odd vintage analogue pedal added to the mix. In this setting, electric guitars can feel alive with dynamics, touch‑sensitivity and sensory feedback in a way that an acoustic just can’t match, at least for me. I would argue that an electric guitar is also far more versatile with an array of different sounds and tones that it can produce.

OK then, here’s the crux… How many rock guitar gods from the halcyon days of Santana, Green, Clapton, Richards and Hendrix, through the experimentalist era of Page, Beck, Blackmore, Iommi and Zappa to the post-modern virtuosos such as Van Halen, Slash, Vai, Satriani and Vaughan have plied their trade exclusively playing acoustic guitars? None to my knowledge, that’s how many. The truth of the matter is that it’s the cutting, screaming, wailing, sighing, jangling and shredding of the amplified, effected electric guitar in the hands of musical geniuses that has forged the mainstay of the rock (‘n’ roll) paradigm over the last 6 decades or so. There are, admittedly, many acoustic guitar prodigies but they don’t feature on my ‘top guitarists’ or ‘top albums’ lists. I rest my case m’lud.

Arguably, it’s the music that matters, rather than whether instruments are amplified or not. In fact, one of my favourite live albums is Nirvana’s ‘MTV Unplugged In New York’ (1994), so I’m not averse to acoustic music, it’s a simple matter of personal preference. I would also contest that, unless one is within a few feet of an acoustic guitar played live, the sound is amplified in one way or another, whether by an amp, a PA, a TV or a hi-fi. I don’t want to get into arguments about which is better; to me, they are just different.

There are many superb vintage acoustic guitars on the market and in the hands of collectors. With the usual finite resources (time, money and space), acoustic guitars will, for now, remain outside the scope of CRAVE Guitars. In addition, there are currently no real vintage electro‑acoustics out there to tempt me. Whatever the reasoning behind my bias, I’ll leave acoustics for the many specialists already occupying that particular space.

I would, however, like to have a good vintage acoustic to hand, just for those occasions when the mood strikes and one wants to strum or fingerpick a tune for a change. I agree that playing an acoustic brings a whole different outlook on composition, arrangement and performance and they are therefore a great complement to electric guitars. You never know, I might be tempted. Something like an old Martin D28 or Gibson J-200 perhaps? Again… hint, hint.

Guitars (Noun)

This will, hopefully, answer the original question at the start of this article about basses. Basically (haha), I am first and foremost a guitarist and I therefore focus on 6-string instruments rather than basses. For the record, I like playing bass and I think that it is good for guitarists to be able to play bass effectively, as it can improve rhythmic and timing abilities as well as adding a different perspective to songwriting. As mentioned at the top of this article, CRAVE Guitars actually has 2 vintage basses and a vintage valve bass amp as part of the ‘family’, which is enough as far as my personal need goes.

Yes, I’d like a vintage Fender Jazz bass and I’d happily accommodate a short-scale vintage Fender Mustang or Musicmaster bass, mainly because they are so cute, funky and cool. I’d also be quite happy with a vintage Gibson EB-0 or a Rickenbacker 4001 bass if a good one came along at a reasonable price and doesn’t displace a sought‑after guitar. Bridging the gap between guitar and bass, a vintage pre-CBS Fender Bass VI has been on my ‘most wanted’ list for a long time but original ones are becoming way, way too expensive. For the third time, hint, hint.

There are many other variations on the stringed instrument theme from diddley-bow guitars with only a single string through cigar box/oil can guitars, tenors and baritones, 12-string guitars, to harp guitars with many strings, as well as double or multi-neck instruments. Then there are are banjos, mandolins, zithers, hurdy‑gurdys, lutes, bouzoukis, balalaikas, not to mention many Asian instruments, as well as numerous European classical and folk stringed instruments. Again, if only for practical reasons, they are all outside the scope of CRAVE Guitars. As with acoustics and basses, there are plenty of specialists focusing on some wonderful exotic stringed instruments from all over the world, so that means I don’t have to.

While on the subject of CRAVE Guitars eligibility, there are a few other factors that come into play. NB. All of these conditions apply equally to amps and effects.

Condition – Condition is very important for me. This doesn’t mean that a guitar has to be museum or collector-grade, far from it. A well-used vintage instrument will have many visible signs of use that give it much of its charisma. If a guitar is 50 years old but looks as if it was made yesterday, it lacks that unwritten backstory of being used that might make it desirable (at least to me). Conversely, an abused ‘players’ guitar’ is of little interest to me, as it is likely to be in relatively poor condition through misuse – a lack of respect for an instrument is generally not a good sign. Once a guitar has been seriously compromised, it will never be the same again. Even if it is professionally restored, a knackered guitar loses so much of its integrity and originality (see below). The issue of restoration to protect and conserve important musical instrument heritage is another story for another day. Badly damaged guitars are a big no-no for CRAVE Guitars, including major damage like neck/headstock breaks, bad repairs, etc.

Originality – Originality is also very important for me. Irreversible modifications are an issue, including refinishes, routing for pickups, holes, adaptations, etc. I have one refinished guitar, my ‘signature’ 1975 Gibson Les Paul, and I regret having it done back in the late 1970s – it had a lot of buckle rash from the previous owner and it seemed the sensible thing to do at the time. I tolerate minor changes such as replacement pots (where there was a fault), tuners, etc. Several CRAVE guitars have had reversible minor modifications and each one is considered on a case‑by‑case basis. In theory, most bits of hardware can easily be put back to original condition if the correct parts are available. If guitars come with original cases, great: if they come with the original tags, manuals and case candy as well, even better. However, it’s the guitar that matters, not the case.

Affordable – I am a financially poor enthusiast with very limited funds, so my spotlight tends to fall on ‘affordable vintage’ guitars. Fortunately, the cool & rare criteria often make some relatively inexpensive guitars available, compared to the elite high‑end investment‑grade instruments. Market accessibility is therefore an important factor for me. I sympathise with neophytes who are interested in and want to own vintage guitars but find the whole scene too ‘exclusive’ – we all have to start somewhere. The ‘easy entry’ end of the vintage market is another reason why I like to focus on a wide range of instruments including some interesting oddballs within reach of many wannabes. Just to qualify, ‘affordable’ doesn’t necessarily mean cheap, it means cost‑effective and value‑for‑money, which can mean different things at different price points. Recently, I have paid (considerably) over market value for a couple of instruments in which I had a specific interest, so I’m not a very good businessman with an eye on future profit margins.

Other Stuff – Another question I’ve been asked is why I don’t sell ‘other stuff’ to support the core vintage guitar enterprise. Three principal reasons; a) I don’t have the money to spend on ‘other stuff’ even if it could partly subsidise the core ‘business’, b) I don’t have sufficient time or space to achieve the core ‘business’, let alone anything extra‑curricular, and c) I’m generally not that interested in ‘other stuff’. I would like to diversify into CRAVE Guitars merchandise such as t-shirts, mugs, plectrums, cards, etc. (orders, please). I might also be tempted into vintage guitar related miscellanea such as jewellery, memorabilia, etc. Diversification also relies on surplus amounts of a) and b) above which, frankly, is looking highly unlikely. The discipline of focusing predominantly on Cool & Rare American Vintage Electric Guitars (now that it has been defined) has to remain relatively pure or I will never be able to make a going concern of it.

The CRAVE Guitars Brand – Brand identity is essential to back up the umbrella CRAVE Guitars trademark. Strategically, if I had more time, money, energy and space, I would definitely create 2 key partner enterprises for vintage instruments to complement CRAVE Guitars. Despite what I said above, CRAVE Basses and CRAVE Acoustics would be on the cards. The ‘E’ part of the acronym becomes a bit less relevant for acoustics (however, I have thought of a solution to that too) but the spirit remains integral to the original concept. My long‑term intention is to create a further 2 complementary enterprises for CRAVE Amps and CRAVE Effects. I may permit someone else to use CRAVE Drums, CRAVE Keyboards and CRAVE Stage & Studio though (unless I change my mind in the meantime). Just be aware that, in terms of copyright ownership, I thought of these first – royalties in an envelope please! I would consider flexible partnership arrangements with a like-minded obsessive keen to expand the CRAVE franchise into these areas, as long as the necessary resources accompany the mission.

Virtual CRAVE Guitars – Social media, predominantly Twitter, takes up a considerable amount of time as does the web site (www.craveguitars.co.uk), including researching and publishing these articles. The social media topics covered are essentially guitar‑related but draw from a very broad interest, encompassing material way beyond the tight C.R.A.V.E. criteria. The problem I have with it is that it is highly resource intensive and the activity intrinsically will never make any money, it is purely about entertaining a diverse audience and raising the profile of what CRAVE Guitars is all about.

In Summary

So, to précis all the above, I use a few simple rules to separate out the ‘wheat from the chaff’. Regardless of brand, price or reputation, CRAVE Guitars should be:

  1. Cool – Quirky, unusual, unique or a variation on a theme, preferably with some added character and interest
  2. Rare – All things being relative, supply is limited, including short-lived or small‑run production models
  3. American – Possibly my one hard and fast rule, the all‑important ‘Made in U.S.A.’ mark
  4. Vintage – Manufactured between c.1950 and 1989 – possibly earlier and unlikely to be later
  5. Electric – I’m not really an acoustic guitar fan. Electric archtops, semis, hollow bodies and resonators are fine though
  6. Guitars – Mainly 6-string instruments. Basses are included but they are not the primary focus

In addition, being pragmatic, a CRAVE Guitar needs to be:

  • In good condition with no serious damage or alterations
  • All‑original or very close to it with no irreversible modifications
  • Cost‑effective and good value‑for‑money

One last pertinent comment before I shut up is to mention the alternative meaning of the word ‘crave’, which is ‘to desire’, ‘to yearn for’ or ‘to want greatly’. This double‑entendre is both important and intentional. Ultimately, it comes down to a simple rhetorical question when looking for vintage guitars (et al), “Is this a really cool guitar that I would want to own and play?” If the answer is “yes”, I would want to showcase it for others to (hopefully) appreciate. However, if I can’t live with a guitar, I wouldn’t dare to presume that it might be of any interest to anyone else. If I don’t hanker after a particular guitar, it doesn’t join the CRAVE ‘family’ no matter how much it is worth.

It is only when all these factors come together that a guitar is likely to join the CRAVE Guitars clan. I am not a dealer and CRAVE Guitars is strictly a not‑for‑profit passion project. Once adopted, a guitar tends to hang around for a considerable period of time. I tend to enter into relationships with my guitars, which means that I’m not one to buy and sell instruments on a whim. I would need strong persuasion to part with one of the ‘family’.

I am amazed that, reflecting on the ‘rules’, they have hardly changed in over a decade, which is encouraging. 10 years ago, when I started to thin the herd and began to refine the ‘business’ model above, the focus was quite strictly on acquiring vintage guitars made by Fender and Gibson. I now realise that this was too exclusive and the net is now being cast more widely. I do, however, remain selective and anticipate that the mainstays of the ‘family’ will remain vintage instruments from ‘Big 2’. Why? Quite simply, that’s what I grew up aspiring to own one day and I suspect that the same applies for many other guitarists who grew up in the 20th Century. The future may well be different and that will be for someone else to take up the mantle long after I and CRAVE Guitars have faded into posterity.

I can put my hand on my heart and swear that I believe that (most of) the guitars that have made up the ‘family’ over the last decade conform to these basic principles. As a core operating model, I think that the principles are helpful and clear, which may become an advantage should CRAVE Guitars become a successful business one day. The principles also differentiate what I do from the competition.

You may well disagree with my philosophy and choice of guitars (et al) but, to be uncompromisingly blunt, that’s not my problem. CRAVE Guitars is internally consistent. If you want to do your own thing using your own preferences, that’s entirely up to you and I wish you well.

In conclusion, now having defined the objective, justified the criteria and articulated the rationale, I hope that the idea behind CRAVE (Cool & Rare American Vintage Electric) Guitars makes some (common) sense. I think that I have also provided answers to both of the specific question about bass/acoustic guitars, as well as the bigger picture question of what it takes for an instrument (or amp/effect) to be considered a member of the CRAVE Guitars ‘family’.

What’s coming up? Well, I hope to have some ‘new in’ headlines for the November 2017 article. In the meantime, I think that it’s time to warm up those vintage valves and plug in my ‘guitare de jour’… now which one shall I go for? Until next time…

CRAVE Guitars ‘Quote of the Month’: “Integrity is doing what you believe to be right and your conviction to stand up for it in the face of concerted opposition.”

© 2017 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?

October 2016 – The South of England Guitar Show 2016

posted in: Event, News, Observations, Opinion | 0

Here’s a change of tack for CRAVE Guitars this month and not something I would normally pontificate about. Yes, there is still some pretentious waffling, so October 2016’s article is not a complete volte face on my part. Before I get going, though, a wee bit of background in 3 points…

  1. My adult working life started in the music industry many, many years ago with very well-known UK south coast musical importer and distributor, which is still in business (and present at the titular event). The only point in mentioning this is that I’ve seen the world of guitar business from both sides of the tracks for a long time.
  2. I have also been to many trade shows over the years and, like many, they become pretty ‘so what’ after a while, especially those where the big manufacturers predictably roll out their shiny new stock and their professional sellers push to move product to eager consumers (or dealers). This is a necessity in any sector and is just par-for-the-course in the world of music trade. The only point in mentioning this is that, over several decades, I’ve become jaded and the anticipatory excitement of pretty new toys at these gatherings has long-since faded. As a result, I haven’t been to a sales/exhibition event for a very long time.
  3. I have also shifted away from new guitars, amps, pedals, etc. and refocused on older and vintage stuff. This passion for vintage guitars ‘n’ things germinated because I hung on to some nearly-new gear back in the day and it has now, inevitably and rather obviously, became old. New equipment rapidly lost its superficial gleam and, like me, the relic patina gained through years of continual use began to shine through in a very different way. The only point in mentioning this is that what I’m looking for now is very different to what appealed to me as a naïve teenager, when new=good, old=bad.

Beyond the cyclical round of big trade shows, I became aware of some regional shows also taking place in the calendar, clearly run by enthusiasts passionate about the subject matter, rather than sterile accountants obsessed with maximising the contribution to the bottom line. These ‘boutique’ events looked much more alluring to me because they encapsulated the desire for guitar music, rather than the drive for mere cash profit. To my chagrin, though, most of these provincial events took place around the north of England. Now, I have nothing against the north other than my own innate laziness to travel and the demands of a full working/family life, so these events came and went without me.

I have, though, campaigned for a while on social media to bring guitar shows down south. Let’s face it, the urbanised south east is where a lot of the country’s filthy lucre is stashed away, so the vacuum down here was a bit perplexing. This may be because of the prohibitive costs of putting something on anywhere near London, especially during recessionary times.

My ‘prayers’ were to be answered. Roll forward to October 2016. Peter and Gail from Northern Guitar Shows (notice the name) thankfully saw an opportunity to address the issue and hosted the South Of England Guitar Show at Kempton Park Racecourse in Surrey this year. Even better, they put me on the guest list – so a big “thank you” to them. Now there was an additional incentive to get out of bed and haul my lazy fat arse over the county boundary and go see what was on offer.

My jaundiced and sceptical view of the music instrument industry (colloquially known as M.I.) has been reinforced by my recent experiences of arrogant vintage and new guitar retailers in both London and the south east. Restoring a little faith, the South Of England Guitar Show was very busy with ordinary folks keen to partake and it looked to be a major success. It also turned out to be an enjoyable experience for a weary, road-worn music veteran. All credit to Northern Guitar Shows for taking the risk with us fickle softy southerners.

Yes, there were the usual trade exhibitors, which one accepts, but none of the corporate big boys – no Gibson, Fender, Marshall, etc. For some, that may have been a disappointment, to me it was a blessing. To many stallholders, exhibitors and performers, it was probably run-of-the-mill and part of the annual trade circuit. Again, to me, it was refreshingly ‘intimate’ and, mostly, friendly. There were, of course, the usual dickheads who come out of the woodwork to frequent these things and make their presence known but, like bad weather, one just has to put up with them.

I was pleasantly surprised at the diverse range of smaller companies making the effort to extract my (sadly hard-earned, rather than ill-gotten) currency. Of note were some up-and-coming guitar makers presenting their wares, including among many others, Palm Bay Guitars, Stone Wolf Guitars and Flaxwood Guitars, all of whom make very pretty and practical musical instruments.

I was also pleasantly surprised by the number and variety of vintage instruments for sale including some VERY nice, but expensive, pieces – too many to mention here. The mix of new and vintage was something that has clearly come about since the last time I trudged around exhibition halls – thinking about it, there probably wasn’t a mainstream ‘vintage’ market way back then, at least not in the way there is now.

There was also decent live music on offer and a host of fringe stuff to maintain broader interest. Of note was The John Verity Band – to those that remember, he was in the band Argent and is a very good blues/rock guitarist. Also worth a listen was industry veteran Phil Harris commentating provocatively about the obsession with vintage authenticity by suggesting that reproductions can not only be as good as the originals but in many cases better. It was refreshing to hear someone who has profited considerably from the vagaries of the vintage market arguing to the contrary in very pragmatic terms. He is quite a nifty guitarist too. The objectionable high-net worth collector market aberration is something that I have also tried to articulate in my blogs but, heh, who listens to me?

Not only did I wander the aisles academically looking for a variety of desirable bits and pieces, I actually shelled out some dosh on a selected vintage item. I had made the effort to be there and so had the sellers, so I wasn’t about to leave empty‑handed. Was I tempted by the usual array of vintage Strats, Teles, Les Pauls, ES‑335s, et al, all going for what I still think is silly money? Hell yes, of course I was – don’t be ridiculous! Even though the art of haggling is still accepted at these events, the prime guitars were all (sadly) way out of my price range, especially during my current period of enforced purchasing abstinence.

So, you may ask, what did I come back with? My eye had been caught by a very modest and reasonably priced cute little guitar… a 1964-ish black sparkle Silvertone 1449 complete from Terry’s Guitars. Terry is selling much of his guitar collection and this baby was up for sale. For those who may not know, Silvertone guitars were made by Danelectro in the ‘60s for the American Sears & Roebuck department stores and were sold as a set with their ‘amp-in-case’ as an ‘all-in-one’ solution for beginners. The Silvertone is pure Danelectro, complete with twin ‘lipstick’ pickups and vinyl tape body edging. The 1449’s sweet 5-watt valve amp features a tremolo circuit and 8” speaker, all of which is cleverly integrated into the slim (and heavy) guitar case. While not the first or last, as an offering to the mass market, it was a genius idea from half a century ago and a move that proved very successful for Sears and Danelectro.

The guitar was very competitively priced because the headstock has a crack in it which, while relatively common, had been poorly ‘repaired’ (with screws – yikes!). This will need professionally seeing to and I feel a trip to see Dave at Eternal Guitars coming on. However, the guitar was otherwise very clean and all-original, and the ‘amp-in-case’ was working (albeit with a new Weber speaker to replace the original). In fact, the valve amp sounds VERY good for what was originally a budget practice amp. So, 52 years after it was made, this particular Silvertone has found a new home at CRAVE Guitars. One wonders where it might be in another 52 years’ time. Who knows?

I was interested in this particular guitar because I have been looking for a vintage Danelectro for ages; CRAVE has a 2008 Chinese-built Dano ’63 which is a modern interpretation of the 1449 (but no case), so this seemed an ideal match. The Silvertone also fits with CRAVE Guitars’ core ethos – Cool & Rare American Vintage Electric guitars (that’s what the acronym CRAVE stands for after all) – and the meek little hybrid ticked all 5 essential criteria. After a short haggle, Terry let me have it for  a reasonable price, including the step-down transformer for the amp’s 110V power supply, which all works perfectly. Thanks Terry. What a cool guy! Striking a great vintage deal was the icing on the cake for a Sunday out with a difference.

So, kudos to all concerned. The good news is that the South of England Guitar Show will return to Surrey on 29th October 2017. My advice? Why not give it a go if you like the idea. Until next time…

CRAVE Guitars ‘Music Quote of the Month’: “Age does not stop a guitarist, death does.”

© 2016 CRAVE Guitars – Love Vintage Guitars.

 ← Return to ‘Musings’ page

Like it? Why not share it?

January 2016 – The Guitarist’s Friends: Amplifiers and Effects

posted in: Opinion | 0

Most of my previous articles have focused on the venerable (electric) guitar – the source of the electrical signal that becomes music. This month, while there is probably a bit of ‘preaching to the converted’, it is perhaps worth reflecting for a moment and going back to basics.

As may be blindingly obvious, the instrument itself is only one part of the equation when making amplified music. On its own, unplugged, an electric guitar would be no good in front of a big audience. As we all know, electric guitars are dependent on some sort of amplification to convert the low-level signal from the guitar’s pickups to the speakers. Losing your amp mid-gig can be embarrassing and not great for your reputation. Even an acoustic guitar needs to be amplified in order to engage a modest sized audience and there is a whole industry now built around dedicated acoustic guitar amplifiers. This isn’t really my thang, so I won’t pontificate on what I don’t understand.

The oft-forgotten component in this signal chain after the instrument is the venerable lead. I express no opinion on this essential piece of kit other than to say that good quality interconnects are vital. If you use RF transceivers, the same principle applies. These items are integral to your overall sound and it is generally worth every penny to preserve your and your guitar’s inherent musical characteristics. They may not be shiny or ‘sexy’ but scrimp on them at your peril.

Then we get onto one’s amplifier of choice. These can be anything from a diminutive, battery powered box to an impressive backline of Marshall stacks turned up to 11. It’s amazing to think that the venerable Marshall stack was 50 years old in 2015. The advent of home recording has led to an explosion in digital modelling and even the use of the iPhone/iPad can bestow tone-enhancing functions beyond the dreams of many recording pioneers. The Line 6 Pod brought about a revolution in digital amp modelling, embraced by many musicians who could see the potential opportunities of technology. Interestingly, rather than create something unique and innovative all of its own, the digital world has gone to enormous lengths to simulate the soundscape of our favourite vintage valve amps and cabinets, perhaps suggesting that those pioneers got something right in the first place.

So… what’s your favourite sounding amp? And, before you start, yes they do have a sound of their own, irrespective of what’s played through them. Fundamentally, it’s down to individual taste. Personally, I tend to favour the ‘American sound’, such as the classic Fender amps, rather than the stalwarts from this side of the Atlantic, typified by Marshall, Vox and Orange. Gibson, surprisingly, has never been as commercially successful at making guitar amplifiers, leaving opportunities for other US makers such as Mesa/Boogie and Peavey. How about some other classic names from the past, such as WEM, H/H, Roland, Laney, Sound City and Hiwatt, amongst others – some still going while others are history. The differences between the various brands are, unsurprisingly, manifold. Nowadays there is a plethora of amps ranging from the far eastern mass-produced to the US and UK boutique builders. Ultimately, it is down to individual taste and, perhaps, what guitar you play. For info, I currently use a vintage Music Man (click here to see the amp feature…) and a modern Cornford Carrera combining the best of US and UK heritage. It is with much sadness that neither are still in production. I recently purchased the wonderful mid-70s vintage Music Man 210 ‘sixty-five’ amp to use as my main amp of choice. This means that some tranny practice and studio gear may have to become ex-loved CRAVE items soon.

Over time, there have evolved recognised and well-accepted guitar/amp pairings, such as the humbucker equipped Gibson Les Paul through a Marshall amp, or the single coil loaded Fender Stratocaster through a Fender amp. However, there are now so many different permutations that provide limitless possibilities for creating one’s own personal signature sound. Why so many guitarists strive to recreate the sound (and style) of others rather than seek a unique, individual signature of their own is probably best left for another debate. For practicality, modern valve amps are safe, reliable and sound great, while digital alternatives give a very good impression of many classics that, let’s face it, most of us will never get to play (let alone own) for real, so let’s not get too snooty. Whether you go for a traditional approach or you adopt a mix-and-match attitude to differentiate your sound, you can experiment to your heart’s content. There is no right or wrong, just what inspires your creativity. That’s the joy of our beloved hobby.

Then, in addition to amplification, there is an abundance of effects units (a.k.a. FX, stompboxes, pedals, etc.) from the mass-manufactured giants to the tiny custom-built independents. The choice is plentiful. The history of stompboxes really started in the 1960s with the fuzz and wah-wah, and has flourished ever since. Now, you can create almost any live or studio sound that you want, from subtle enhancement to unrecognisable noise sculpting. Take your pick between analogue, digital or hybrid, whatever takes your fancy. Personally, I have a soft spot for 1970’s lush vintage analogue Electro-Harmonix effects pedals, such as the Big Muff Pi, Memory Man and Electric Mistress. For modern effects, I generally use Boss and Line 6 units. So much choice, so many opportunities, so little time to experiment. One could spend a lifetime exploring the creative tonal capabilities of effects alone without ever really listening to what the guitar itself can do. Again, it is worth investing in quality leads and power supplies to avoid degrading the magic of your performance.

One characteristic I’ve noticed is the traditionalism that extends from guitars to amps and effects. Many of today’s designs are either copies of, or are heavily influenced by, the past, for example emulating the classic Ibanez Tube Screamer, Dunlop Fuzz Face/Cry Baby or MXR Phase 90. Occasionally, there is genuine innovation; the Digitech Whammy pedal or Roland Loop Station spring to mind? I wait in anticipation for the ‘next big thing’ to challenge our usually conservative prejudices. In the meantime, there is a growing interest in acquiring vintage amps and effects to add to instruments and therefore (re)create the original setups heard on iconic stages and in countless studios for what seems a lifetime of great music, effectively reconstructing the soundtrack of our lives for new audiences. A subject for a future article.

CRAVE guitars are frequently played unamplified to get a feel for the way they resonate and respond to touch without any electronics. Other times, when the mood takes, it is fun just to pile on ridiculous amounts of modification and enjoy the sonic chaos created by rampant knob‑twiddling. Isn’t the electric guitar a wonderful thing, especially when allied to your favourite sound enhancing electronics? Where would we be without them all? Enjoy. Until next time…

CRAVE Guitars ‘Music Quote of the Month’: “Learn from other musicians; don’t copy them or the best you’ll ever be is an average plagiarist”

© 2016 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?