29 Jan 2024

January 2024 – A Brief History of the Bass Guitar

by | posted in: History, Introduction, Observations, Opinion | 0

Prelude

WELCOME FAIR MUSIC‑MINDED PATRONS to the first CRAVE Guitars’ monthly article of the New Year. While we may be less than a full month into the year Two Thousand and Twenty Four of the Common Era, one hopes it is off to a good start despite global uncertainty (and insanity). Let us hope that those intent on geopolitical conflict come to their senses, unlikely as it may seem, rather than escalate tensions further. I don’t know about you but I don’t want to be part of the doomsday generation. Scary.

“Bellum omnium contra omnes (the war of all against all)” – Thomas Hobbes (1588‑1679)

Getting back to the musical point, ask pretty much anyone with a slight interest in modern music culture, the question, “Who invented the first bass guitar?” and I’m sure a lot of people would say, “Leo Fender, of course”. Well yes… and no. In the world of vintage guitars, things are rarely quite as straightforward as one may at first think.

With the recent addition of CRAVE Basses to the CRAVE Guitars, Amps and Effects family, this month seems perfectly apt to take a quick look at how the electric bass guitar as we know it came into being and how it has become such an integral component of contemporary music.

Primarily as a guitarist, my dalliances with bass guitars up to now have, I admit, been spawned out of curiosity and exploration, rather than a serious preoccupation. Those dalliances, though, span well over four decades, so the bass encounter isn’t a single, short or recent ‘event’.

We do not start the story, as many might imagine in the 1950s. We’ll come back to that in a little while. Before we get there, though, we should go back quite a few years. Many, many years in fact, starting with the classical orchestral double bass, originating from the 15th Century or thereabouts. Then we’ll explore the modern‑day innovations starting in the 1920s and 1930s before the ‘big bang’ that really exploded in the 1950s and 1960s. Finally we’ll come up‑to‑date, with a look at the instruments, equipment, artists and sounds that have helped to shape the modern musical landscape. Finally, we’ll take a wee peak into the near future of bass instruments.

The fretless acoustic double bass

Before the solid body fretted electric bass guitar, popular music relied almost totally on the acoustic upright double bass for low frequency impact. The instrument’s origins date approximately to the 15th‑16th Century in Venice, Italy. Venetian musician, Silvestro Ganassi developed a ‘bass viola da gamba’ in 1542, widely regarded as the forerunner of today’s double bass. It wasn’t until around 1700, though, that the double bass became part of the opera orchestra. The double bass as we now know it is the largest and lowest‑pitched chordophone in the classical music orchestra.

As a quick recap, defined by the Hornbostel‑Sachs system of musical instrument classification, a chordophone is a musical instrument that makes sound from vibrating one or more taught strings by bowing, plucking or striking the strings. Examples of chordophone types include violins, guitars, and pianos respectively. The word chordophone stems from the Greek words for string (chordē) and sound (phonē).

For more on the historical origins of musical instrument classification (to provide a context for the development of the guitar), see CRAVE Guitars’ March 2018 article.

A Potted History of the Guitar Part I (The ancient world up to the early Renaissance):
March 2018 – A Potted History of the Guitar Part I (craveguitars.co.uk)

The traditional 4‑string double bass is usually played in one of two ways, either by rubbing the strings with a bow (arco) or by plucking the strings with fingers (pizzicato). Some modern double bass players, for instance in rock & roll and rockabilly, also use a distinctive ‘slap’ technique. This percussive sound derived from the ‘Bartók pizzicato’ (‘snap’ pizzicato) named after the Hungarian composer and pianist Béla Bartók.

Double Bass (courtesy of Roxanne Minnish)

Depending on the style of music, the double bass is also known by a number of other names, all of which refer to the same instrument. Some of these alternative monikers include bass, upright bass, string bass, acoustic bass, acoustic string bass, contrabass, contrabass viol, bass viol, bass violin, stand‑up bass, bull fiddle, doghouse bass and bass fiddle.

The traditional double bass is a large acoustic fretless instrument of the violin family that is played upright. The deep, resonant, woody tone of the double bass endows it with a very different sound when compared to the modern solid body fretted electric bass guitar. The tuning of the double bass is different from other members of the orchestral sting instruments, in that it is tuned in fourths (E‑A‑D‑G) rather than a violin’s fifths (G‑D‑A‑E). The double bass, then, is tuned the same as a modern bass guitar, an octave below the bottom four strings of a 6‑string guitar in standard tuning. This particular characteristic aided the bass’s transition from classical to modern day musical styles.

Originally, double basses were more likely to have three strings until four strings became commonplace by the 19th Century, by which time the standard format and construction of the double bass had become established. There are, however, 5 and 6 (or more) string variants and there are also various alternative tunings.

The double bass has been the mainstay of orchestral string sections and chamber music for several centuries in one form or another. It was predictable that, with the emergence and evolution of the major modern popular music genres, such as jazz, blues and country & western that the double bass would become the go‑to bass instrument, at least up until the 1960s when the solid body fretted electric bass guitar became predominant. However, the double bass hasn’t disappeared from contemporary music completely. Plenty of present‑day artists still use or revert back to the double bass for authenticity and/or effect.

The main drawback experienced by many players is that the double bass is a substantial piece of equipment. The full‑size double bass is almost 75 inches (190cm) tall, weighing in at c.20‑25lbs (9‑11½kg), without its hefty case. The scale length is set at around 42” (107cm), much longer than most modern bass guitars. Given these dimensions, the double bass is sizeable, cumbersome, unwieldy and plain heavy, making it far from the easiest of instruments to move around or play. There are smaller double basses including ¾, ½ and ¼ size, mainly aimed at younger players. Even so, the double bass not for the faint hearted, as the smallest ¼ size instrument is still over 61” (156cm) tall.

Another drawback is the double bass’s acoustic construction. Like the acoustic guitar, in the first half of the 20th Century, the acoustic double bass’s lack of volume made it hard to be heard in a jazz‑era big band mix unless there was some form of electrification through either a magnetic pickup or a microphone connected to an amplifier and, even then, acoustic instruments can be prone to feedback in high sound pressure level environments.

Traditional double basses are not only large but, because of their construction, they are also quite expensive, making them a major investment and therefore difficult for novices or younger players to access and learn.

Even so, despite its limitations, during the 20th Century the double bass became widely used in a diverse range of modern music genres, including jazz, blues, swing, rock & roll, rockabilly, country & western, bluegrass, folk, funk, reggae, metal, rock, pop, tango and visual media soundtracks.

Trivia: Believe it or not, there is an even larger bass, first built c.1850 by the French luthier Jean‑Baptiste Vuillaume (1798‑1875) in Paris. The octobass, as it is called, has three strings and is basically a larger version of the double bass tuned a further octave down. The octobass is a truly gargantuan beast, approximately 137” high (348cm).

The electric upright bass

To enable modern players to experience the spirit of the acoustic double bass in a more convenient and amplified form, there is the modern Electric Upright Bass (EUB), which is also played, as its name suggests, upright, like a traditional double bass.

EUBs allow for greater portability while retaining the playing style and general sound of its forebear. As the EUB doesn’t require the substantial acoustic resonating chamber of a double bass, they often feature a ‘skeleton’ body, making it much smaller, lighter and cheaper to produce. The minimal structure may have either a solid body or a small acoustic body.

A magnetic, piezo or condenser bass pickup provides the means to route the signal via a bass amplifier to loudspeakers. Like a double bass, the EUB’s strings can be bowed or plucked, although that is dependent on fingerboard and bridge radius. While evoking its acoustic origins, the structural and electric characteristics of the EUB endow it with a unique sound all of its own.

As the EUB’s construction isn’t bound by convention like its orchestral sibling, the flexible format allows for a range of scale lengths to be employed from around 30” (76cm), through 34” (86cm) like a long scale bass guitar to the full 42” (107cm) of a double bass, making it much more accessible to a range of players. Almost all EUB necks allow for a full two‑octave range and most but not all are fretless. Compared to the double bass or the electric bass guitar, the electric upright bass tends to be a modern, notable but relatively niche instrument. There are EUB models at all price points, making it easier for novices and experienced players alike.

The first production electric upright basses were developed independently in the mid‑1930s by Regal (Electrified Double Bass), Vega (Electric Bass Viol), Rickenbacker (Electro Bass‑Viol) and Audiovox (bull fiddle – see below). Gibson introduced their special order Electric Bass Guitar in 1938, which was still an upright fretless instrument with a hollow body and a magnetic pickup.

Manufacturers of electric upright basses include Framus, Ampeg, Warwick, Ibanez, Yamaha, Palatino, NS Design (Ned Steinberger), and Harley Benton.

Electric Upright Bass

The first solid‑body fretted electric bass guitar

As hinted at above, while Leo Fender was the major innovator associated with the solid‑body fretted electric bass guitar, he wasn’t the first. He was beaten to the starting post by at least some 15 years. Hardly a photo finish!

The first indication of the possible future of a bass guitar was in 1924 when the legendary Gibson designer, Lloyd Loar came up with a prototype electric bass. The Loar concept focused on the body, pickup and strings but with little additional detail. Loar’s radical design was rejected by Gibson management at the time. Loar left Gibson shortly thereafter in 1924, so his visionary ideas for an electric bass guitar went no further.

Nearly a decade later, around 1933, American musician and inventor Paul H. ‘Bud’ Tutmarc (1896‑1972), based in Seattle, Washington, began experimenting with reducing the size of the double bass to a more manageable instrument. Tutmarc originally devised an electrified fretless double bass‑style instrument described as an electric 4‑string upright ‘bull fiddle’, slightly smaller than a cello.

It’s worth a quick diversion to go back in time to take in an original report from the ‘Seattle Post‑Intelligencer’ newspaper, which published the story on 17 February 1935. The headline read, “Pity Him No More – New Type Bull Fiddle Devised.”

The article went on to state that, “People have always pitied the poor bass-fiddler… who has to lug his big bull-fiddle home through the dark streets after the theatre closes. But he doesn’t have to do it anymore. Because Paul Tutmarc, Seattle music teacher and KOMO radio artist, has invented an electric bull-fiddle. One you can carry under your arm. And it doesn’t even need a bow, either. You pluck a string – and out of the electric amplifier comes a rich, deep tone, sustained as if five or six bass violinists were bowing five or six bass‑violins with masterly artistry. The tone is sustained as long as you want it, too, without a bow.” The instrument described in the article was a cello‑like upright fretless instrument with an electromagnetic pickup.

Tutmarc was, however, about to do something far more radical. By 1935-1936, Tutmarc, had changed direction and developed the first solid body fretted electric bass guitar, pretty much recognisable in its modern form. It was this version of Tutmarc’s bass that was intended to be played horizontally, rather than upright, in a similar way to the modern bass guitar. The 1935 sales catalogue for Tutmarc’s company Audiovox featured his ‘Model 736 Bass Fiddle’, a solid‑bodied electric bass guitar with four strings, a fretted neck, with a 30½” (775mm) scale length, an ebony (or purpleheart) fingerboard with 16 frets, a black walnut body, a hidden single Tutmarc‑Stimpson horseshoe pickup below a mirror-steel faceplate, and a single volume control.

Tutmarc AudioVox Model 736

In addition, as an electric bass guitar would be pretty much useless without the means to amplify the sound, Audiovox also sold an accompanying ‘Model 936’ bass amplifier with 18 watts of power and a 12” Jensen Concert speaker.

Around 100 of the Model 736 Audiovox bass guitars were made in the mid‑1930s. However, there are only thought to be three Model 736 Tutmarc bass guitars still in existence today, making them remarkably rare. One belongs to the Experience Music Project (EMP), now known as The Museum of Pop Culture (MoPOP), a non‑profit enterprise founded by Microsoft co‑founder Paul Allen in 2000 and based in Seattle, Washington state, USA. In 2018, a 1936 Audiovox Model 736 bass guitar was reportedly sold by Tutmarc’s grandson on eBay for $23,850.

Sadly, for Tutmarc, the Audiovox 736 was not a commercial success. The price tag was high for the mid‑1930s, in a country still severely affected by The Great Depression (1929‑1939). The 736 bass fiddle originally cost $65 and the matching 936 bass amplifier cost $75, placing it well out of reach for many musicians. The high price and the radical concept didn’t attract enough musicians at the time and it wasn’t long before it was discontinued and was subsequently forlornly forgotten to history. Tutmarc’s company, Audiovox folded in 1950.

It can well be argued that Tutmarc was ahead of his time. Perhaps it is a case of supply looking for a demand that consumers didn’t know they needed. Maybe it was bad timing and/or bad luck. The Model 736 also arrived shortly before the outbreak of World War II when the guitar manufacturing industry was deemed ‘non‑essential’ and resources were diverted to the American war effort. Furthermore, a bass guitar didn’t seem to fit seamlessly into any of the prevailing musical styles at that time.

It is surprising, though, that such a significant innovation in guitar history isn’t more widely known about. Perhaps it is time, nay overdue, for Tutmarc’s milestone achievements to be deservedly recognised.

One company, Luthiery Laboratories, makes modern‑day replicas of the Audiovox 736, keeping the spirit of the original instrument alive.

Audiovox 736 Bass (1/4) ~ Luthiery Laboratories (luthierylabs.com)

The first commercially successful mass produced solid body fretted electric bass guitar

And so it was that the scene was set for someone else to step in and make the bass guitar ‘a thing’. That someone else was Clarence Leonidas Fender (1909‑1991). Unlike poor old Paul H. Tutmarc, you may just have heard of him.

“I wonder if I could make an electric bass” – Leo Fender (1909‑1991)

For more on the history and development of Fender guitars and musical equipment, see CRAVE Guitars’ August 2018 article for the context behind Fender solid body electric guitars.

A Potted History of the Guitar Part VI (1950s and 1960s):
August 2018 – A Potted History of the Guitar Part VI (craveguitars.co.uk)

Once the proverbial ball started rolling, the bass guitar had a phenomenal, transformative and relatively rapid impact on modern music that cannot be underestimated or understated. It is also very easy to take the electric bass guitar’s presence on stages, in studios and bedrooms all around the world for granted. Back in 1950, though, no‑one other than a select few in Fullerton, California had any idea of what was to come.

So… what are we actually talking about? The answer, after the lengthy preamble (apologies for keeping you on tenterhooks for so long), is the mighty Fender Precision Bass. Three little words. Game changing, era defining and well‑deserving of all the hyperbole attached to it over the past seven‑plus decades. So much has been written about the Precision that there is little need to dredge up the detail again, so what follows is a brief overview.

Leo Fender was working on a prototype back in 1950, bringing the world’s first commercially successful mass‑produced electric bass guitar to market in 1951. Fender designed the Precision Bass (often shortened these days to P‑Bass) to overcome the many drawbacks of the acoustic double bass alluded to earlier in this article. Even the name, Precision, referred to the fretted neck to enable musicians to play in tune far more precisely than on the double bass’s fretless neck. Conservative double bass players may well have looked at the Precision Bass in the same way that conservative guitarists looked at the Fender Telecaster, which had been introduced a year earlier in 1950. Consternation and indignation were probably natural initial reactions from the ‘old‑school’.

At its most basic, the Fender Precision Bass is a solid body, 4‑string bass guitar equipped with a single pickup and a one‑piece 20‑fret maple neck with rosewood or maple fingerboard. It all sounds so very straightforward and unremarkable nowadays doesn’t it?

The Precision Bass didn’t, however, appear fully formed. The original design of the Precision borrowed several design features from the Telecaster guitar, other than the double cutaway body. Initial models carried one single coil pickup, a slab body, large scratchplate and a Tele‑like headstock.

After Fender introduced the Stratocaster guitar in 1954, some of its design features were brought over to the Precision including a contoured body and a Strat‑like headstock. The original pickup was replaced with a single split coil hum cancelling staggered design and a sleeker redesigned scratchplate. It is this version of the Precision from 1957 that has stayed in production largely unchanged to the current day. There have been many, many variants with numerous changes in specification over the years, including a fretless version (ironically, given the origin and intention of the Precision’s name). 5‑string versions, 22‑fret necks, active electronics, multiple pickups, etc. followed.

The original pre‑1957 Precision design has been re-issued by Fender at times over the years, often called the Telecaster Bass to differentiate it from the post‑1957 Precision specification.

The popularity of the Fender Precision Bass grew significantly throughout the 1950s especially with rock & roll and country fraternities, as well as with session musicians. During the 1960s the solid body fretted electric bass guitar became dominant in most modern musical genres. During the early days, there wasn’t a great deal of choice in terms of alternatives to the Precision but that was to change later on.

1977 Fender Precision Fretless Bass

Fender capitalised on their supremacy by introducing the solid body fretted electric Fender Jazz Bass in 1960 (originally called the ‘Deluxe Model’). The svelte Fender Jazz Bass (often now shortened to J‑Bass) was designed to appeal to a different customer base. Like the offset bodied Fender Jazzmaster guitar, it was aimed squarely at the dyed‑in‑the‑wool jazz community. However, like the Jazzmaster, the Jazz Bass’s appeal spread far wider than jazz musicians. Like the Precision, the Jazz Bass has rightly become an iconic industry standard solid body electric bass guitar.

Throughout the years, both the Precision and Jazz Bass have featured sizeable chrome covers over the pickup and the bridge, despite these items limiting playing techniques such as palm muting the strings. As the covers are purely aesthetic, rather than functional components, it is fair to say that the vast majority of musicians removed these covers permanently.

Without doubt, the Fender Precision Bass and its younger sibling the Jazz Bass are icons of contemporary music and remain hugely popular today. Consumers can purchase genuine P‑Bass and J‑Bass models from the budget Fender‑owned offshore‑produced Squier brand, through Mexican and American‑made Fender models, to the high‑end Fender Custom Shop versions. Throughout the decades, the Precision and Jazz Bass models have oft been imitated and/or blatantly copied by other manufacturers, eager to cash in on Fender’s industry‑dominant status.

Understandably, over the years, the Precision and Jazz Bass have become highly collectable, especially the earliest models. The highest vintage market prices undoubtedly belong to the models from 1951 (Precision) and 1960 (Jazz Bass) to 1965, when Leo Fender sold his company to industry giant CBS. Fender equipment from this period is known as ‘pre‑CBS’.

For more information on the Fender Precision and Jazz Bass, just complete any Internet browser search and, alongside a great deal of drivel, there is a massive volume of fact and opinion available, often described in forensic detail.

1989 Fender Jazz Bass American Standard Longhorn

Evolution of the electric bass guitar

It is probably fair to say that, since 1951 and the introduction of the Fender Precision Bass, other brands were in the position of having to play catch up. In particular, Fender’s biggest competitor, Gibson, was wrong‑footed and they have never been able to compete on a level playing field. In 1953, Gibson released the EB‑1, which was a violin‑shaped solid mahogany body bass with a set neck. The EB‑1 didn’t catch on and was replaced by the semi‑acoustic ES‑335‑shaped EB‑2 in 1958, the SG‑shaped Gibson EB‑0 in 1959 and the EB‑3 (made famous by Jack Bruce of Cream) in 1961. While the semi‑acoustic EB‑2 proved popular, its Epiphone‑branded counterpart, the Epiphone Rivoli proved more successful. All these early Gibson basses used a shorter 30½” scale. In 1959, Gibson also released a hollow body EB‑6 6‑string bass.

Possibly Gibson’s best contender for an iconic bass guitar is the Gibson Thunderbird, originally introduced in 1963. The Thunderbird was based on Gibson’s Firebird guitar, designed by legendary American car designer Raymond Dietrich (1894‑1980). The Thunderbird was the first Gibson solid body bass to use the 34” scale made popular by Fender. Like the Firebird, the Thunderbird was redesigned in a simpler ‘non‑reverse’ form for 1966 and the original ‘reverse’ shape wasn’t reissued until the mid‑1970s. During the 1970s, Gibson also released the Ripper and Grabber basses but neither really captured bass players’ imaginations (or their precious dollars!). Later additions like the Gibson Triumph, Victory and RD basses didn’t fare much better as viable competition for Fender’s stalwarts. Epiphone have Thunderbird and EB basses in their line‑up alongside Epiphone‑specific basses such as the Newport and the Embassy.

Over at Danelectro in Neptune, New Jersey, Nathan Daniel launched the world’s first 6‑string bass, the UB‑2 in 1956 comprising a single cutaway semi‑hollow bass with a 30” scale, 24 frets and dual single coil pickups, earning its nickname the ‘Tic Tac bass’. In 1958, Danelectro replaced the UB‑2 with two new 6‑string bass models. The first was the Long Horn 4623 bass with a radical new lyre‑like design 24 frets, and a short 25” scale. The other was the Short Horn 3612 with stubby double cutaways, 29½”scale and only 15 frets. All Danelectro models substantially undercut the retail prices of both Fender and Gibson’s basses. The 6‑string models seemed to attract guitarists rather than bass players to their designs, providing a novel bridge between guitar and bass camps.

It should be noted at this point that older 6‑string basses are generally tuned an octave below a guitar in standard tuning, to E-E, while the baritone guitars that were appearing at the time were tuned either to B‑B or A‑A. On the other hand, modern 5‑string basses simply add a lower B string while modern 6‑string basses tend to add lower B and higher C strings compared to an equivalent 4‑string bass. Confused?

Meanwhile, back in the 1960s, Fender weren’t resting on their laurels. Following the popularity of the ‘student’ Mustang guitar, Fender introduced the short scale Mustang Bass in 1966. The Mustang Bass spawned two later variants, the Bronco Bass (introduced in 1967) and the Musicmaster Bass (introduced in 1971). Fender also released two esoteric ‘bass’ guitars, the Fender Bass V (introduced in 1965), which was the world’s first 5‑string bass guitar and the 6‑string Bass VI (introduced in 1961). The latter was strongly influenced by the Fender Jaguar guitar design. The Bass VI was Fender’s upmarket response to the Danelectro 6‑string bass introduced 5 years earlier. The Bass VI is unique in having 3 pickups, 6 lighter gauge strings, a short 30” scale, a floating bridge and a mechanical vibrato as used on the Jazzmaster/Jaguar guitars, as well as a removable string mute. To compete with the Gibson EB‑2 and Epiphone Rivoli thinline semi‑acoustic basses, Fender introduced the hollow Coronado Bass in 1966.

In addition, the ‘other’ Californian company, Rickenbacker, run by F.C. Hall at the time, also wasn’t going to be left on the side‑lines in the bass department. Rickenbacker had hired Roger Rossmeisl (1927‑1979) who designed the brand’s key guitars and the 4000 series basses. The Rickenbacker 4000 bass with its distinctive cresting wave body outline and thru‑neck construction was launched in 1957. Subsequent models were named 4001, 4002, 4003, 4004, all being variants of the same basic instrument. There isn’t enough space to go into the specification differences here.

Rickenbacker 4001

A decade after Leo Fender left the company that still carries his name today, Music Man was formed in California and released Leo Fender’s vision for the next evolution of his era defining bass guitars. The Music Man Stingray Bass was released in 1976 with a single large bridge humbucker, distinctive 3+1 headstock, innovative on‑board active electronics and an integral string mute. While Music Man’s guitars never caught on at the time, the Stingray Bass has joined Fender and Rickenbacker as an iconic design for many bass musicians. The Stingray Bass was especially popular for funk slap‑style bass technique for the likes of Louis Johnson of the Brothers Johnson.

1978 Music Man Stingray Bass

There are a few other notable basses, such as the German Höfner ‘violin bass’, the 500/1, made famous by Paul McCartney of The Beatles. This model, introduced in 1955, with its carved solid spruce top and humbucking pickups, is often nicknamed the ‘Beatle Bass’. Beyond the Beatles connection, though, the 500/1 remains a relatively minor entry in the bass stakes, while the company’s only other notable entry being the Höfner Club and Verythin basses.

Another oddity to mention at this point is the Swedish Hagström H8, unique for being the world’s first mass‑produced 8‑string bass, with four pairs of strings on a short 30” scale. The H8 was only produced briefly from 1967‑1969.

Throughout the 1960s, 1970s and 1980s a plethora of other companies jumped on the bandwagon, eager to make the most of the massive increase in demand as rock, pop and other genres proliferated. Many of the basses produced during this time were flagrant facsimiles of the best‑selling American brand models, often by Japanese companies (now termed ‘lawsuit‑era’ copies). Other companies like Warwick in Germany were making their own headway with their successful original‑design Thumb and Streamer basses.

Today (2024), Fender arguably still rules the roost with basses covering all bases (sic!) from budget to elite models. All other brands stand firmly in Fender’s enviable shadow. While Fender may dominate, there are now plenty of alternative options. There are some incredible bass guitars out there, some of which are listed later in this article for those that want to diverge from the predictable industry standard ‘Fender sound’. There are numerous ways to deviate from the common path, with different brands, string/pickup configurations, electronics, scale lengths, body construction, etc. The quality of budget instruments is vastly superior to anything available in the past and provides a strong basis (again, sic!) for players seeking to learn and develop their skills.

The acoustic bass guitar

While the solid body electric bass guitar finally took the world by storm from the 1950s and 1960s, the acoustic bass guitar has proved to be another modern, notable and niche instrument. The first (largely unsuccessful) attempts at acoustic bass guitars began to appear in the 1950s as a logical extension to its electric counterpart.

Historically, one of the earliest acoustic bass‑like instruments was the Mexican guitarrón, which has its roots in the 16th Century and is widely used in Mexican Mariachi bands. While looking similar to a guitar, these huge instruments were either 6‑string or 12‑string acoustic instruments, tuned in A‑D‑G‑C‑E‑A.

In 1972, Ernie Ball introduced the Earthwood acoustic bass guitar, stating that “…if there were electric bass guitars to go with electric guitars then you ought to have acoustic basses to go with acoustic guitars.” A simple yet ‘blindingly obvious’ observation, given the benefit of hindsight. Ernie Ball took a guitarrón, being the nearest thing to an existing acoustic bass guitar, and created a more practical instrument for guitar‑centric American consumers. The Earthwood was relatively short‑lived but the foundation of the acoustic bass guitar was established. American company Washburn took the concept and created more successful instruments that coincided neatly with MTV’s Unplugged concert series (1989‑1999). Interestingly, despite starting it all, Ernie Ball does not have an acoustic bass guitar available to buy at the time of writing.

Acoustic bass guitar construction is essentially similar to the steel‑strung flat top acoustic folk guitar, with a larger hollow wooden body and a longer scale neck. Most acoustic basses have four strings, tuned in the same way as an electric bass, E‑A‑D‑G, an octave below a standard guitar. The majority of acoustic basses have fretted fingerboards, although some are fretless.

Acoustic Bass Guitar

Like many modern day acoustic guitars, many acoustic bass models have pickups to enable them to be amplified for stage use or DI’d for recording purposes. Some instruments are thinline electric semi‑acoustic basses while others are full‑depth electro‑acoustic basses. These are designed primarily as acoustic basses with an on‑board pickup for additional amplification when needed.

Today, there are any number of acoustic bass guitars on the market for every level of player and every price point from many key manufacturers including, amongst others; Martin, Taylor, Guild, Fender, Takamine, Ovation, Tanglewood, Epiphone, Warwick, Epiphone, Washburn, Godin, ESP, Breedlove, Larivée, Framus, Hohner, Ozark, Dean, D’Angelico, Ibanez, Sigma, Alvarez and Cort.

Bass guitar amplification

In the early days of bass guitars, brands released bass amplifiers to accompany their instruments, often sold as a package (see Tutmarc’s Audiovox above, for example). Other brands like Rickenbacker did the same in the early days. The main difference between guitar amps and bass amps is that the latter are tuned specifically to reproduce bass frequencies accurately. A standard 4‑string bass guitar produces low frequencies in the range 41Hz to 100Hz with overtones extending up to 4‑5kHz (not dissimilar to an acoustic double bass in fact).

In terms of sound pressure levels, bass frequencies need more power to be heard by the human ear/brain at the same volume as higher frequencies, so bass amps tend to have higher power ratings than guitar amps. In the past, speakers for bass also tended to be larger with 12”, 15” or even 18” to shift the amount of air needed at lower frequencies. In contrast, guitar speakers tended to be 10”or 12”. Bass speaker cabinets, especially those with multiple speakers, normally had sealed or ported enclosures to increase volume. For all these reasons bass amplifiers and speaker cabinets tend to be different to their guitar equivalents.

Probably the most famous brand associated specifically for its bass amplification is the American company Ampeg, founded in 1946 and now under the ownership of Japanese giant, Yamaha. Ampeg started out attempting to amplify the acoustic double bass in 1949 by using a microphone/pickup in the instrument’s stand. The ‘Amplified Peg’ as it was called was then shortened to ‘Ampeg’ and the rest, as they say, is history. Their most famous range of amps was the 300W Ampeg SVT from 1969 and their bass combo amps, the B‑15 from 1960, as used by the likes of Motown session bass player James Jamerson.

It was no surprise that Fender, the leader in the world of bass guitars from the 1950s should also produce bass amps/cabs. Perhaps the most famous Fender bass amp was the Bassman from 1952 onwards, first introduced as a combo valve amp with a 15” speaker. The most desirable though, was the Dual Rectifier Bassman valve combo with 4×10” speakers. From 1960. Fender also released a ‘piggy back’ amp head and speaker cabinet design to cope with higher power levels and to provide flexibility. From 2000, Fender released a solid state version of the legendary Bassman amp. The original valve Bassman also became beloved by many guitar players for its tone, for instance by the late blues rock guitarist, Stevie Ray Vaughan (SRV).

Student bass players also needed a bass amp. So Fender introduced the Musicmaster Bass amplifier in 1970, as a companion to the Fender Musicmaster Bass guitar. The Musicmaster Bass combo amp was a very simple affair with one channel, 12W of power, volume and tone controls and a single 12″ Fender speaker. Like the Bassman, it has latterly been enjoying a bit of a revival as a budget vintage amp for guitarists. The Musicmaster Bass amp was discontinued in 1982 after the introduction of the Fender Studio Bass combo and Japanese Fender Sidekick Bass 30. Nowadays, the extensive Fender Rumble series has proved very popular with bass players.

Legendary British amplifier company Marshall was not going to be left behind. Marshall’s first 100‑watt bass head was the JTM 45/100 / JTM 45 Super 100 model. Another, also dating from the second half of the 1960s, is the JMP #1992 Super Bass 100 (100W) and JMP #1986 Bass (50W). Like the Fender Bassman, the Marshall Super Bass 100W also proved popular with guitarists. Bass players were also known to use the Marshall #1963 Super PA (50W) and Marshall #1968 Super PA (100W) amps.

Another legendary British amplifier company, VOX produced bass versions of its AC‑15 and AC‑30 combo amps. These were followed in 1963 by the VOX T‑60 and Foundation amps, the latter promoted by Bill Wyman of the Rolling Stones.

German acoustic amp company AER also produce a range of bass amps, particularly well‑suited to amplifying acoustic and electro‑acoustic bass guitars.

Bass guitarists turn out to be a little less conservative than their guitarist counterparts, especially when it comes to amplification and speaker cabinets. For instance there are plenty of modern‑day bass amps that use efficient solid state D‑class amplification (a type of amplifier that uses digital switching technology to amplify audio signals efficiently), with very high power ratings – 500W and 600W or more being not uncommon. Bass amps often also make wide use of sophisticated on‑board EQ. Speaker cabinet configurations also tend to be more versatile with reflex ports, horns, tweeters and combining multiple speaker types being common.

There are many other valve, solid state or hybrid bass amplifier manufacturers not mentioned above, including Trace Elliot, Ashdown Engineering, Mesa/Boogie, Peavey, Music Man, Hiwatt, Laney, Sound City, H/H, WEM, Hartke and Orange.

Bass guitar effects

Things have changed a great deal over the decades since 1951. In the early days of the solid body electric bass guitar, most players plugged straight into their amps without much in the way of tone augmentation.

By the 1970s and 1980s bass players had a paucity of effects specially designed for their instruments, so they generally adopted guitar effects with just a few bass‑specific pedals to choose from. Since the industry started to migrate to digital technology from the 1980s onwards, the major effect companies began to produce pedals designed primarily for use with bass guitars. Now, in the 2020s, there is plenty of choice with most of the big players in the effect industry now making bass‑specific effect pedals, including Electro‑Harmonix, MXR, BOSS, Ibanez, Fender, Laney and Ampeg.

In addition, from around the start of the new millennium, a number of manufacturers turned their ideas for integrated multi‑effect units into practical musicians’ tools that became popular for both guitar and bass, including BOSS, VOX, Zoom, Tech 21, Behringer and Valeton.

In 1998, Line 6 introduced a ground‑breaking innovation called the POD, which put many guitar effects, amps and cabinet emulations into a single portable unit. While the little red kidney shaped POD was initially directed at guitarists, the rack mounted Line 6 POD Pro models came in both guitar and bass versions. Since then, Line 6 and other manufacturers now combine guitar and bass amp/effect/cabinet emulations into a single unit. These units are constantly improving and are gradually replacing stage backlines with direct input (DI) into PAs/monitors, as well as into studio desks/DAWs. Along with the POD, Line 6, also now part of Yamaha, is still in the same business with their extensive Helix range.

Alternatives to the Line 6 POD and Helix units include the Axe-Fx III from Fractal Audio, which is a pro‑level amplification/effects processor suitable for both guitar and bass. Meanwhile, Kemper Amps took a slightly different route with their Profiler, which has all‑in‑one effects, amplifier and speaker cabinet profiles designed for both guitar and bass.

Just to finish off, there are numerous boutique effect pedal manufacturers that produce stomp boxes, often to very high degrees of quality, including brands such as Way Huge, TC Electronic, EarthQuaker Devices, Darkglass, Aguilar, Origin Effects, Free The Tone, Providence, Source Audio, Walrus Audio, ZVEX, Mooer Audio, Sansamp, Digitech, Eventide, Strymon, JHS, Keeley and Empress Effects.

Iconic (and other) bass guitars

The next sentence is likely to be highly provocative and intentionally so. While there are innumerable bass guitar models out there from 1951 to the current day, there are probably only four bass guitar models that can truly be called iconic (i.e. something that is widely considered to epitomize an era, culture, community or place). The four key instruments – none of which are based on guitar equivalents – that stand head and shoulders above the rest are:

Truly iconic bass guitars:
Fender Precision Bass (1951‑date)
Fender Jazz Bass (1960‑date)
Rickenbacker 4000 series (1957‑date)
Music Man Stingray Bass (1976‑date)

In addition, below are listed just a very few of the other great electric bass guitars manufactured from 1951 onwards. This is far from a comprehensive list and is intended only to be broadly indicative of the type.

Fender bass guitars:
Fender Bass V
Fender Bass VI
Fender Coronado Bass
Fender Mustang Bass
Fender Musicmaster Bass
Fender Performer
Fender Telecaster Bass
Squier Bronco Bass

Gibson bass guitars:
Gibson EB series
Gibson Thunderbird
Gibson Explorer Bass
Gibson Melody Maker Bass
Gibson Grabber/Ripper/G3
Gibson RD series
Gibson Triumph
Gibson Victory
Gibson 20/20 Bass

Epiphone bass guitars (not including Epiphone versions of Gibson basses):
Epiphone Embassy
Epiphone Newport
Epiphone Rivoli
Epiphone Viola

Other American brand bass guitars:
Alembic Series 1/2
Ampeg Dan Armstrong Lucite
Ampeg AEB-1
BC Rich Eagle
BC Rich Mockingbird
BC Rich Warlock
Danelectro Longhorn 4623
Danelectro Shorthorn 3612
G&L JB2
G&L L1000/L2000
Gretsch 6071/6072
Gretsch G2220 Junior Jet
Gretsch 5440 Electromatic
Guild B-301/B-302
Guild Starfire
Harmony H22
Harmony H27
Jackson JS
Kramer 450-B/650-B
Kramer DMZ
Lakland Skyline
Music Man Sabre
Music Man Sterling
National Val Pro Model 85
Ovation Magnum
Peavey T-40
Peavey Millennium/Milestone
PRS SE Kestrel/Kingfisher
Schecter Omen
Schecter Stilletto
Silvertone 1440 series
Steinberger Spirit XT
Steinberger Synapse
Supro Pocket
Travis Bean TB2000
Washburn Taurus

European bass guitars:
Burns Sonic
Hagström H8
Höfner Club
Höfner HCT-500/1
Höfner President
Hohner B2
Hohner The Jack
VOX Clubman
VOX Cougar
VOX Phantom 4
VOX Sidewinder
VOX VBW Teardrop Bass
Wal Mk1/Mk2
Warwick Thumb/Streamer/Infinity/Corvette
Warwick Rockbass

Japanese bass guitars:
Other than perhaps the Yamaha BB and TRBX series, and the Ibanez SR and TMB series, Japanese bass guitars do not have the same level of brand/model heritage when compared to those produced by American and European companies. There are, however, many Japanese basses produced by companies such as Ibanez, Tokai, Greco, Jedson, Westone, Teisco, ESP/LTD, Fernandes and Aria.

“Without the Fender bass, there’d be no rock n’ roll or no Motown. The electric guitar had been waiting ’round since 1939 for a nice partner to come along. It became an electric rhythm section, and that changed everything.” – Quincy Jones (1933‑)

Famous bass players

Below are listed seventy of the world’s most famous and influential bass players – alive and departed – including upright double bass and electric solid body bass guitar players. There are, of course, many, many more but this is an indicative list for those interested in exploring some of the music created by these diverse musicians (in alphabetical order):

Aston ‘Family Man’ Barrett (Bob Marley & The Wailers)
Walter Becker (Steely Dan)
Andy Bell (Oasis)
Bill Black (Elvis Presley)
Jack Bruce (Cream)
Cliff Burton (Metallica)
Geezer Butler (Black Sabbath)
John Cale (Velvet Underground)
Stanley Clarke (Return To Forever, solo)
Adam Clayton (U2)
Bootsy Collins (James Brown, Parliament/Funkadelic)
Tim Commerford (Rage Against The Machine/Audioslave)
Billy Cox (Jimi Hendrix)
John Deacon (Queen)
Kim Deal (Pixies, Breeders)
Willie Dixon
Gail Ann Dorsey (David Bowie)
Bernard Edwards (Chic)
John Entwistle (The Who)
Flea (a.k.a. Michael Peter Balzary – Red Hot Chili Peppers)
Bruce Foxton (The Jam)
Simon Gallup (The Cure)
Roger Glover (Deep Purple)
Kim Gordon (Sonic Youth)
Larry Graham (Sly & The Family Stone)
Marshall Grant (Johnny Cash)
Steve Harris (Iron Maiden)
Dusty Hill (ZZ Top)
Peter Hook (Joy Division, New Order, The Light)
Glenn Hughes (Deep Purple)
Jah Wobble (a.k.a. John Joseph Wardle)
James Jamerson (session musician)
Louis Johnson (The Brothers Johnson)
John Paul Jones (Led Zeppelin)
Carol Kaye (session musician)
Lemmy Kilmister (Hawkwind, Motörhead)
Mark King (Level 42)
Alan Lancaster (Status Quo)
Geddy Lee (Rush)
Phil Lesh (Grateful Dead)
Tony Levin (Peter Gabriel)
Jenny Lee Lindberg (Warpaint)
Phil Lynott (Thin Lizzy)
Glen Matlock (Sex Pistols)
Paul McCartney (The Beatles, Wings, solo)
Duff McKagan (Guns N’ Roses)
John McVie (Fleetwood Mac)
Marcus Miller (Miles Davis, Herbie Hancock, George Benson)
Charles Mingus
Krist Novoselic (Nirvana)
Pino Palladino (session musician)
Jaco Pastorius (Weather Report)
Guy Pratt (Madonna, David Gilmour)
Suzi Quatro
Dee Dee Ramone (Ramones)
Noel Redding (Jimi Hendrix)
Mike Rutherford (Genesis)
Robbie Shakespeare (Sly & Robbie)
Billy Sheehan (Steve Vai, David Lee Roth)
Gene Simmons (KISS)
Nikki Sixx (a.k.a. Frank Carlton Serafino Feranna Jr. – Mötley Crüe)
Chris Squire (Yes)
Sting (a.k.a. Gordon Sumner – The Police)
Danny Thompson (John Martyn)
Thundercat (a.k.a. Stephen Lee Bruner)
Robert Trujillo (Metallica)
Sid Vicious (a.k.a. Simon John Ritchie – Sex Pistols)
Roger Waters (Pink Floyd)
Tina Weymouth (Talking Heads, Tom Tom Club)
Tal Wilkenfeld (Jeff Beck, Prince)
Bill Wyman (Rolling Stones, Bill Wyman’s Rhythm Kings)

“The gunk takes the funk” – James Jamerson (1936‑1983)

Bass in the (near) future

It is difficult for, and unfair of, me as a guitarist, to predict any sort of unified future for the bass guitar but I’ll give it a shot.

The traditional conservative brigade will still stick to tried and tested instruments and equipment. Musicians looking for something a bit different will probably want to experiment with the format, for instance number of strings, scale lengths, pickups and electronics. If anything there will be more radical and custom bass guitar designs from up‑market and boutique luthiers that diverge from the traditional archetype set by Fender over 70 years ago. Many additions to the form extend the flexibility of the core instrument, so it may be a case of further evolution, rather than revolution.

Bass amplification will continue to diverge from its simple valve origins and continue to embrace the digital realm, probably dispensing with backline amps/cabs altogether with signals being DI’d into desks/PA/monitors.

While bass players haven’t been particularly well served in the past for bass‑specific effect pedals, I anticipate that bass effects will achieve greater representation, including some out‑there effects not currently available to guitar players.

Bass guitar players have struggled to compete, with synthesisers dominating the world of modern electronica, dance and popular music. At least, for now (thankfully), the bass guitar remains essential to most guitar‑based music in a sort of symbiotic, co‑dependent relationship. As long as guitars keep going, so will bass, and vice versa. Bass players, being ever inventive individuals, will adapt and cultivate new ways to keep the instrument relevant, current and in the limelight for decades to come.

Technique‑wise, there will continue to be the traditional approaches towards walking bass lines, typically using the fundamental root/fifth styles that has been the general mainstay of modern music for decades. In contrast, there will be many more amazing virtuoso bass players who see the versatility and potential of the instrument in its own right.

So, other than tangible incremental progress around the margins, there is probably not a whole lot that will change profoundly in the near future. I may be wrong with that last sentence. In many ways, I hope so!

Interestingly, while the upright double bass continues to appear in modern music from time to time, the solid body fretted electric bass hasn’t really made any headway into the clique of conservative classical orchestral music, which still relies heavily on the traditional, some may say archaic, acoustic upright double bass.

Resources

Periodicals dedicated to bass guitar may be the best place to keep up‑to‑date with the technology and equipment associated with the instrument. Publications include Bass Musician Magazine, Bass Player Guitar Magazine, Bass Guitar Magazine, Bass Magazine, Bass Musician and Bass Gear Magazine.

Online resources include Music Radar, TalkBass.com, Basschat and No Treble. There are also many books on bass guitars and bass playing techniques, including the inevitable, ‘Bass Guitar For Dummies’.

As far as purchasing bass guitars, there are the large Internet sites, brick & mortar retailers and the usual online sites, Reverb.com and eBay. For vintage and rare bass guitars, there are outlets purely for basses including (in the UK) Andy Baxter Bass, The Bass Gallery, The Bass Centre, Vintage Bass Room and ClassicandcoolGuitars.

Some final thoughts

I certainly learnt a lot from researching and writing this article. At first sight, there may seem to be quite a bit of relevant information on the Internet. It is only when one starts to dig deeper and attempt to put something together that makes some form of sense that things rapidly become unclear. All of a sudden, much of the available information seems incomplete, contradictory, vague and/or outright erroneous. In the end, it comes down to evidence and corroboration but sorting the wheat from the chaff isn’t always easy. It seems that online information about vintage guitars is far more reliable than that about vintage basses. There are far too many poorly informed people who invent facts and present opinion as truth.

Despite my best attempts to piece things together, I may have fallen foul of the same issues raised above. However, I have tried very hard not to fill in gaps with assumptions and/or fiction. While I endeavour to be thorough and rigorous, my approach isn’t academic and I don’t have the time, funds or energy to provide the last word in scholarly fact. The contents herein should therefore probably not be relied upon too heavily. This article should, for that reason alone, be regarded as my best intention to balance fact with entertainment.

“Believe nothing, no matter where you read it, or who said it, unless it agrees with your own reason and your own common sense.” – Buddha (Siddhārtha Gautama – c.480‑400BCE)

This is just the sort of article that would benefit greatly from images to illustrate and break up the narrative. Sadly as a (broke) not‑for‑profit entity, I cannot afford the costly copyright/royalties charged for the use of relevant images, so I have had to rely on very limited free/public domain resources or my own photographs. I apologise for the thousands of words used to describe what images could do in none. Once again, no AI was used in the research and writing of this tome – only my own hard work.

NB. Apologies to anyone disappointed by the wait for a cheap, clichéd joke at the expense of ‘the bass player’! T’ain’t gonna happen here. Love ‘the bass player’.

CRAVE Guitars’ ‘Album of the Month’

Given that this month’s article focuses on the fascinating history of the bass guitar, it seems only fitting to select an album that demonstrates the virtuoso bass playing of one of the greatest bass guitarists of all time, Jaco Pastorius (1951‑1987) and his famous modified fretless Fender Jazz Bass.

Weather Report – Heavy Weather (1977) – The seventh and most commercially successful studio album by the American jazz fusion band. ‘Heavy Weather’ was the first album with Pastorius on full‑time bass duties. The smooth jazz funk production of the album, which was released at the peak of the punk rock movement in the US and UK, stood in stark contrast to the otherwise brutal sounds of the late 1970s. Given that it sold in huge numbers (and still does) is testament to the composition and musicianship on display. Initial sales were about 500,000 and total sales to‑date are over 1.06 million. Other Weather Report albums may be ‘better’ according to purists but this is the one I heard first and it has stuck with me over the years.

Weather Report – Heavy Weather (1977)

To me, this album hit me right between the eyes about what virtuoso bass playing can be like. There are many, many other artists and albums that could arguably take the acclaim, for instance Stanley Clarke’s successful solo album, ‘School Days’ (1976), but on this occasion, the late, great Jaco (& co.) takes the accolade, such as it is.

“I’m the greatest bass player in the world” – Jaco Pastorius (1951‑1987)

Tailpiece

Well, there you go. I think that most of us love a bit of decent low bass in our music. I hope y’all got something out of this fleeting exploration into the defining instruments, artists and music of the lower registers. I think the narrative works well as a complement to the launch of CRAVE Basses at the end of 2023, but that’s just my (obviously biased) opinion.

I hope you feel inclined to come back next month to see what’s currently fermenting in the CRAVE guitars’ secret brewery.

Truth, peace, love, and guitar music be with you always. Until next time…

CRAVE Guitars’ ‘Quote of the Month’: “Mundanity is the devourer of lost dreams”

© 2024 CRAVE Guitars – Love Vintage Guitars.

Like it? Why not share it?
29 Jun 2020

June 2020 – Whazzup at CRAVE Guitars

by | posted in: Introduction, Observations, Opinion | 0

Prelude

WELCOME BACK ONCE again guitar fans and hello to any new visitors. We are now half way through an extraordinary 2020 and the world is still turned upside down in so many concerning ways. While there may be glimmers of light at the end of the tunnel for COVID‑19, there is still a long way to go and there will be profound ramifications that it will leave in its sizeable wake. At the end of last year, we had no inclination as to what was about to befall, yet here we are now. Perhaps us hooman beans really aren’t as clever as we seem to think we are (shock, horror – hold the front page!). It seems that we also still have some way to go before all people are deemed equal and can live their lives freely, responsibly and peacefully. The first half of 2020 has passed by very quickly and, frankly, good riddance to it. I don’t like wishing life away but it has been 6 months that I’m sure we could all have done without, everything being on‑hold.

Well, here we are and no more historical facts, quotes or predictions on which to ponder this month. I said at the very end of the last article that I would get back to pontificating about ‘cool & rare American vintage electric’ guitars and, at last, I can deliver on that promise/threat (delete as applicable).

There are 3 themes on which I’d like to embark this month. Firstly, I mentioned in my December 2019 article that I had bought some gear (big surprise… not) during last year but I didn’t go any further than to list what they were, without any indication as to the whys and wherefores behind the spending spree. Secondly, after 18 months, most of the 42 repatriated guitars have now been properly assessed and worked through as far as I am able. So far, I haven’t given any real sense about what I found and what I learnt from the exercise. Thirdly, there have been a number of purchases during the first half of 2020 and in due course I can reveal what those are and how they relate both to the existing ‘collection’ and to the ‘wanted’ list from that same December 2019 end‑of‑year/look‑forward roundup.

I think that there is more than enough material to occupy one article, so without further ado, let us begin at the beginning. Sitting comfortably? Good. Then, we’ll begin…

2019 CRAVE Guitars’ Purchases

An Introduction to the 2019 CRAVE Guitars

2019 was certainly an interesting year. Due to circumstances, I started out not anticipating much in the way of guitar purchases. The relatively modest vintage guitar ‘wanted’ list from December 2018 included a Danelectro of some sort, a Fender Starcaster and a Gibson Melody Maker. These had all featured on the target list for more than one year, so it seemed a fairly realistic expectation. What actually happened was a bit more fruitful than I foresaw and I think it deserves some rationale to indicate why they weren’t random purchases. In fact, 2019 resulted in nine new additions to the CRAVE Guitars family, spanning five decades (1940s‑1980s with at least one from each). I couldn’t really afford the outlay but, although it meant sacrifices in other areas, it has probably been worth a bit of hardship. I hope you find this array of short stories moderately interesting.

1982 Fender Bullet H2

This is what happened when esteemed Fender designer John Page was tasked with creating a low cost student model to carry the ‘Made in U.S.A.’ decal and replace the outgoing Mustang and Musicmaster? The result was the Fender Bullet. I’d already acquired a 1981 Fender Bullet which was essentially a Telecaster‑on‑a‑budget model. Several aspects of the first iteration intrigued me and I set about looking for a second generation model, with the more Stratocaster‑like body outline. Initially, I was looking for a ‘standard’ one with twin single coil pickups and the integrated bent steel pick guard and bridge assembly, just like the ‘Tele’ Bullet. Instead, I found a cool Fender Bullet H2 in great all‑original condition in very smart red and white with a maple neck. This version has a more robust standard integrated hardtail bridge/tailpiece with through‑body stringing. The H2 features what at first glance appear to be standard twin ‘humbuckers’. However, looks can be deceiving. The pickups aren’t actually traditional humbuckers – they are actually 4 single coil pickups arranged as two pairs in humbucking configuration. In addition to a normal 3‑way pickup selector switch, the H2 has two additional buttons that ‘split’ the humbucking pickup pairs to give a wide range of tonal options including genuine single coil sounds (unlike most tapped or split humbuckers). When it arrived, one of the 4 pickups wasn’t working and it had to be sent to a pickup expert to fix. Thankfully, it was a weak connection between the coil and pickup lead, so easily sorted. Like the earlier Bullet, the H2 has a very nice standard Telecaster neck. The diverse sounds available from this guitar are nothing short of remarkable and it makes me wonder why this particular unique configuration hasn’t been widely used since. The early USA‑made Bullets were misunderstood and tend to attract a lot of unfair criticism from purists. As a result, like the Fender Leads of the time, they weren’t manufactured for long. Judging it on its own terms, this is really not the cheap Stratocaster imitation it may seem at first glance. I realised that the Fender Bullet H2s are both cool and quite rare, so fit the CRAVE criteria. I never envisaged that it would be so fascinating and collectable while still being affordable. This Bullet H2 came with its original (if battered and stickered) Original Hard Shell Case (OHSC).

1975 Fender Starcaster

The Fender Starcaster (and, no, that isn’t a spelling error) has been a long‑standing ‘wanted’ guitar, ever since I got a 1960s Coronado. There is very little similarity between the two models but as there are very few semi‑acoustic electrics in the brand’s history, I was once again curious. Unusually, I bought this one from a retailer, so I probably paid more than I normally would have considered but it was worth it. Where the Coronado is fully hollow, the Starcaster has a solid centre block running under the pickups and the massive hardtail bridge/tailpiece assembly. Surprisingly, the Starcaster has through‑body stringing like a Telecaster. While the Coronado has DeArmond single coil pickups, the Starcaster uses the sublime Seth Lover ‘wide range’ humbuckers as used on several Telecaster variants from the 1970s. While both the Coronado and the Starcaster use bolt on maple necks, they are, again, very different and the latter is unique to the model with a maple fingerboard. Both the Coronado and Starcaster were reissued by Fender in 2013 although neither are a patch on the originals. The vintage Starcasters are instantly recognisable because of the distinctive bridge assembly and the 5 controls (2 volume, 2 tone plus master volume). When going over the guitar on arrival, I found it was a rare very early 1975 (pre‑production?) model. It has been well used but is still in remarkably good condition with the sort of genuine patina that only age can bestow. The tobacco sunburst and sunburst flame maple is just gorgeous. It is also a fantastic guitar to play with a great neck and I really like the (in‑vogue) offset body shape. Even better, it doesn’t play or sound like any other Fender, ever made. The Starcaster didn’t prove popular on its original release and wasn’t produced for long before being quietly discontinued in 1982. I can understand why it didn’t sell in large numbers but that misses the point about its exclusive charms. Make no mistake, the Starcaster is a high quality instrument just waiting to be rediscovered. This beauty is not to be confused with cheapo far‑eastern Strat imitations from the 2000s that unfortunately carried the ‘Starcaster by Fender’ moniker. The case, while vintage, is not an original Fender Starcaster case. Obtaining a Fender Starcaster was a long‑standing aspiration achieved, which can now be removed from the ‘wanted’ list. These babies are now becoming extortionately expensive on the vintage market, as the ‘collectorati’ are now cottoning onto them. Seems I got this one just about in time‑ish.

1979 Fender Stratocaster Anniversary

I already have a 1977 Stratocaster hardtail and I was kinda looking around for one from the early 1970s with a vibrato before they become unaffordable (rapidly heading that way now). Along the way, I became distracted by the 1979 Anniversary Stratocaster. I missed out on a couple before I finally attained one (once again at a higher price than I intended, unfortunately). The Anniversary is distinctive in that it was Fender’s first foray into limited edition commemorative models, celebrating 25 years since the original Stratocaster’s introduction in 1954. I was attracted by the classic look of silver, black and maple fingerboard. Whether one can regard a massive 10,000 examples as a ‘limited edition’ is debatable. It also comes with a very unsubtle ‘Anniversary’ logo emblazoned on the bass horn plus a much more understated 25th anniversary neck plate which carries its serial/issue number. This one comes with its original certificate of authenticity and most (but not quite all) of its case candy, as well as its ABS OHSC, all of which is nice to have. Like all Anniversary models, this one is heavy at 10lbs (4.6kgs) but I can live with that because of the part this model plays in electric guitar heritage. It looks cool, sounds great and plays very nicely, although the action is a little high. Fundamentally, though, it is essentially a standard Stratocaster with a few aesthetic embellishments. This guitar is in excellent, almost mint condition, which suggests that it was kept as a memento rather than an instrument to be played, which in my view is sacrilege. These aren’t especially rare instruments and many purists would say they aren’t cool. Well, I’m going to stand my ground and say that I like it, which is why it now has a safe home here at CRAVE Guitars.

1983 Fender Stratocaster Elite

This is the first of a pair of Fender Elites that I bought in 2019 (and the second Stratocaster!), both of which I think are quite desirable. As background, the Elite series was only produced in 1982 and 1983 before it was withdrawn shortly before CBS sold Fender in 1984. It is the innovative electronics that really set the Elites apart. The signal chain starts with 3 ‘noiseless’ single coil pickups including an additional dummy coil to reduce hum. These pickups are distinguishable by the Fender logo covers with no visible pole pieces. Instead of a 5‑way pickup selector switch, there are 3 on/off buttons, 1 for each pickup, giving 8 permutations in all (including all ‘off’). This arrangement provides easy access to more sounds than the standard Stratocaster of the time. The switching is unusual but also very intuitive (far better than Fender’s current S‑1 switching). The signal then passes through an on‑board active pre‑amp powered by a 9V battery. The controls are different too and not just the nice soft‑touch logo knobs. There is the usual single master volume complemented by two master tone controls, comprising Fender’s propriety MDX (MiD‑range eXpander) boost and TBX (Treble/Bass eXpander) circuit. The Strat’s iconic jack plate is also absent, with the output moved to the body edge. The bridge assembly is also unique, here it is a top‑loading hardtail Fender Freeflyte bridge. In use, it plays just like a Strat, although it is a touch on the heavy side. The sounds though are, as you might expect, quite different from a normal Stratocaster. Before the purists clamour with cries of sacrilegious iconoclasm, the electronics went on, albeit modified, to be used in both the Eric Clapton and Buddy Guy signature guitars, so the Elite wasn’t an abortive experiment. This example looks particularly cool in creamy Olympic White with a lovely rosewood fingerboard. This Elite is in lovely all‑original excellent condition and comes with its ABS OHSC. Like many 1970s and 1980s Fenders, these are now becoming more desirable on the vintage market. These original Elites are not to be confused with the similarly named but otherwise standard Elite series instruments issued by Fender between 2016 and 2019.

1983 Fender Telecaster Elite

More?! OK then. Onto the second in the pair of Fender Elites. This one is a 1983 Telecaster Elite in lovely translucent Sienna Burst with a gorgeous rosewood fingerboard. Like the Stratocaster Elite, it is a fascinating variant on the classic design. The electronics here comprise dual‑coil noise‑cancelling Alnico 2 pickups routed through an on‑board active 9V preamp with 2 volume controls allied to the same MDX (mid‑range) and TBX (high‑range) tone controls as found on the Stratocaster Elite. Like its sister model, it has the unique top‑loading hardtail Fender Freeflyte bridge. The body has cool single binding on the top edge, similar to the original Custom Telecaster from the 1960s. For some inexplicable reason, the designers at Fender felt that a Telecaster would look good with a Les Paul‑like scratchplate. They were wrong, it doesn’t. Fortunately, the scratchplate was provided in the case, rather than being attached and even then, it could be stuck on with double‑sided tape. Personally, I prefer it without the scratchplate, revealing the woodgrain through the finish. Like the Stratocaster, the Telecaster is a touch on the heavy side but I can forgive that because of its unique position within the Fender canon. This little beauty is in near mint condition and includes its OHSC. The Elite is far from your average Telecaster and, on my unending quest for something cool and rare, it has found a good home here at CRAVE Guitars. Both Elite models (and there was also a Precision bass in the range as well) are harder to come across than standard models, so the prices tend to reflect their relative scarcity. The Elites are unequivocally ‘curio’ guitars from the last dying days of Fender’s notorious CBS era, so they tend to be frowned upon by purists, which makes them all the more appealing to the maverick side of my enduring addiction to the quirky and idiosyncratic guitars from a generally unloved period of guitar history.

1947 Gibson ES-150

Thus, we move onto the ‘Big G’. The author sadly hit one of those dreaded ‘big birthdays’ in 2019 and without much else to celebrate, I figured that I would mark my passing years with something self‑indulgent. I had been keeping my eyes peeled for a vintage Gibson ES‑150 for several years and watching as the prices escalated to, frankly, silly levels. I couldn’t afford one of the carved top pre‑war models with the Charlie Christian pickup, so I was looking around for a newer model, which would be cheaper. For those that may not know, the Gibson ES‑150 was introduced in 1936 and is acknowledged as the first commercially successful electric Spanish guitar. I eventually found a lovely 1947 ES‑150 from the first year of post‑war production and sporting a single P90 pickup. This one was way, way more expensive than I could normally justify so, because of my impending mortality, I was tempted to go for it. In fact, it is the most I’ve ever spent on a single instrument to‑date. This ES‑150 was residing in Italy, so I imported it before Brexit shuts down all opportunities to access vintage fare from our European colleagues. Owning a really old hollow body non‑cutaway jazz guitar is new territory for me, so it was with some trepidation and excitement that I was delving into this particular art form. The guitar itself is in fine all‑original condition with just surface crazing to the lovely sunburst nitrocellulose finish. There is no serial number or Factory Order Number (FON) which, along with the features, dates it to 1947. Playing it is a different experience altogether, as it needs heavy semi‑flat wound strings to get the laminated top vibrating. Then there is the limited upper fret access to contend with, so it takes some time to acclimatise to the technique. Being deep‑bodied and fully hollow, this one actually works quite well as an acoustic jazz guitar too. As you may know, I really like single pickup guitars, so there is less to get in the way of pure P90 tone. The ES‑150 is currently a bit of an outlier within the CRAVE Guitars family. One thing is for sure, it isn’t going anywhere anytime soon. Definitely not the ideal guitar of choice for metal heads though.

1965 Gibson Melody Maker

This 1965 Melody Maker was a bit of a gap filling exercise. Between 1959 and 1971, Gibson released four versions of their ‘student’ guitar, the Melody Maker. The first was a single cutaway Les Paul shape (1959‑1961), the second was a unique and really cute double cutaway model (1961‑1965), the third iteration was a somewhat crude and short‑lived double cutaway model (1965‑1966) and the final generation was SG‑shaped (1967‑1971). This is one of the rather ‘ugly duckling’ models from 1965 (weirdly often called the ‘type 2’, even though it’s the third body shape), which completes the set. The Melody Maker comprises a slab mahogany body with double cutaways, a set mahogany neck with the typical narrow headstock, one single coil pickup, and comes in a reserved cherry nitrocellulose finish. Unsurprisingly, this model has never been reissued by Gibson, although there has been a Joan Jett signature guitar. The Melody Maker name has re‑appeared a number of times since the 1960s. This example is not in pristine shape but is all‑original and it comes with its OHSC. At least this one hasn’t been butchered over the years unlike many. I was shocked that a recent guitar magazine article (which I won’t name but they really should know better) was recommending that the vintage Melody Maker body should be routed and the pickup replaced with a P90 or humbucker! Unbelievable and indefensible! I think that the narrow single coil pickups give the Melody Maker a distinct tone, which is very underrated by purists. Melody Makers are unique in the Gibson history books and unmolested examples deserve much more credit in my view. They are made from the same materials in the same Kalamazoo factory by the same people as other highly prized models and should be regarded (and treated) as worthy vintage instruments in their own right. They are very light and resonant, making them really easy to pick up and play. Compared to many Gibsons from the 1960s, Melody Makers are still relatively affordable on the vintage market and represent a good starting point for people interested in collecting vintage guitars from a major American brand. Personally, I have to admit that I am not a huge fan of this pointy body shape but now that I own one, it is growing on me.

1989 PRS Classic Electric

Having dipped my toes into the world of Paul Reed Smith (PRS) guitars with an elegant 1988 PRS Standard, I was looking around for other early hand‑finished guitars that were made in PRS’s original facility in Annapolis, Maryland. These early, so‑called ‘pre‑factory’ models are becoming increasingly collectable, especially as they are now beginning to get to vintage age (and price!). The early PRS Customs are becoming incredibly expensive, so my eyes settled on an early PRS model that was initially called the Classic Electric when introduced in 1989. The model was swiftly renamed as the CE after a legal dispute with Peavey over the original name. NB. The CE is not to be confused with the far Eastern PRS SE (‘Student Edition’) guitars. I also had my sights set on the early solid Electric Blue metallic finish, which I think is stunningly beautiful. This example is a very early Classic Electric, being only the 473rd guitar off the production line, distinguished by its 24‑fret, bolt‑on maple neck and the plain headstock carrying the block ‘PRS Electric’ logo (soon to change to the familiar modern ‘Paul Reed Smith’ signature script logo). There are quite a few marks including one significant ding to the body and the finish on the back of the neck has worn down. The wear indicates that it has been well played, which is often a sign of a soundly put together instrument. OK, it doesn’t have the flashy flame or quilted maple cap, faux binding, bird inlays or set neck but it is still a very creditable guitar that plays very well and sounds great. The CE is one of those under‑the‑radar PRSs that the collectors tend to overlook, although genuine owners praise them very highly. PRS finally got around to re‑releasing the bolt‑on CE model in 2016 but the new ones really aren’t the same as these early ‘handmade’ examples. Despite the wear and tear, it is all‑original and comes with its OHSC but no case candy. You can’t have everything. A vintage PRS Custom to add to the Standard and Classic Electric sadly has to remain on the wish list for the time being.

1959 Silvertone 1304

I had a bit of a mad spell towards the end of the year when I was buying several guitars for the sake of it. I was looking for a vintage Danelectro and came across this funky little 1959 Silvertone 1304 with its single cutaway and dowdy brown finish. It is very similar to the Danelectro U1 (differentiated by pickup position and headstock logo), which is no surprise seeing that Danelectro manufactured Silvertone guitars for the Sears & Roebuck retail and mail order company at the time. The 1304 is actually a pretty rare model being only available in Sears & Roebuck’s ‘Wish Book’ Christmas catalogue and related advertising of 1958, 1959 and 1960. The neck and familiar ‘coke bottle’ headstock is also rare, being finished in natural, rather than colour matched to the body, apparently due to supply shortages at the time. It also has the circular electrics cover on the back and the squared off neck joint that confirms its age and lineage. The ever present Lipstick pickup and body‑edge tape will be familiar to Danelectro fans. It also feels, plays and sounds just like you’d expect a vintage Danelectro from the 1950s, i.e. great. This was the last of the Danelectro single cutaway body shapes before they moved to double cutaways in the 1960s. The single pickup and simple controls let you focus on playing and getting the most out of a very cool and groovy (and lightweight due to semi acoustic construction) instrument. It is a lot of fun to pick up and play and hard to put down. The action is a little high but that resistance actually forces one to play differently compared to a more ‘refined’ guitar. Like others in this résumé, it is in fine all‑original condition, although it sadly doesn’t come with an original 1950s case. These cool Silvertone and comparable Danelectro guitars are still amazingly affordable for vintage guitars from the so‑called ‘golden era’, perhaps because they were (generally) made in large numbers and sold to a largely undiscriminating ‘student’ audience at the time.

2019 CRAVE Amps? What Amps?

Right, that’s the 2019 guitars covered, so what else was new? Well CRAVE Amplifiers didn’t achieve anything at all in 2019 – no new additions and no losses. Nada. As it turned out, I was quite happy running two relatively similar modest little units as daily go‑to amplification during the year, a 1978 Fender Champ and a 1978 Fender Vibro Champ both in ‘silverface’ livery. Don’t underestimate these diminutive 5W Class A valve amps, they are really great for what they are. I acknowledge that I’m not a vintage amp specialist, so they are not hugely abundant here at CRAVE Guitars. Owning vintage valve amps demands space, time and effort as well as oodles of filthy lucre, so I’m not in a huge rush to buy up large numbers of vintage amps.

An Introduction to the 2019 CRAVE Effects

CRAVE Effects did a little better during 2019, although there were only five new pedals to join the clan. Having said that, two of those were outstanding examples of the type. As with amps, because I am not a vintage effect expert, I’m sticking to a few well‑known global brands from the 1960s to 1980s, rather than go too far into the realms of the unique, idiosyncratic and unusual.

1987 BOSS RV-2 Digital Reverb

It may seem heretical to many but this is the first vintage digital effect to join the CRAVE club. This Japanese BOSS RV‑2 was sought out principally because there are few vintage compact analogue reverb pedals out there. Yes there are the bulky (and expensive) vintage valve reverb tanks from the likes of Fender but I wanted something small and convenient to add an extra special dimension to the aforementioned Fender Champs, neither of which have on‑board reverb. So, a digital reverb was the way to go with this rather plain looking but flexible 1987 BOSS RV‑2. It provides a range of reverbs and it sounds quite natural without too many sibilant digital artefacts, although not quite the soft and cuddly warm tones of traditional analogue reverbs. Still, it does its job very well and it is from the right era (pre‑1990s), which is why it’s here. Interestingly, the high current draw of the digital circuitry in the RV‑2 means that it cannot be powered by batteries and requires a BOSS PSA power supply in order to do its ‘0’ and ‘1’ digi‑thing.

1969 Dallas Arbiter Fuzz Face

This is the first of two iconic classic pedals acquired in 2019. The humble but fabled English Dallas Arbiter Fuzz Face rose to stardom mainly because of none other than Jimi Hendrix. This isn’t one of the earliest Fuzz Faces that used germanium transistors but one of the first to use silicon transistors, this one dating from c.1969. It is amazing what a few cheap electronic components can end up being turned into. Truth be told, I didn’t actually intend to get this pedal. It came along via an eBay auction and I decided to take a punt and put on a (relatively) low bid and… what happened? No‑one came along at the last minute to beat me and I ended up getting it. Yikes! Yes, it was hideously expensive but not as bad as it could have been. Therefore, while it was not exactly a bargain, I suppose it was still a reasonable price for what it is. Fortunately, it delivers its fuzzy glory in all the right ways, so that’s OK then. It is in excellent all‑original condition and in perfect working order, so my initial reticence was soon overcome. It actually looks pretty cool in red too. By today’s standards, its circular form factor does take up a disproportionate amount of pedalboard real estate but, c’mon, it is a vintage fuzz pedal – what’s not to like? The original Fuzz Face was definitely a batteries only zone back in the 1960s and neither is there an LED status light to indicate when it’s on. Great though it undoubtedly is, this is clearly not one of those pedals you’d want to gig with down the local pub, that’s for sure.

1982 Ibanez PT9 Phaser

At totally the other end of the value scale from the Fuzz Face, we have a fairly widely available and averagely collectable 1982 Ibanez PT9 Phaser. CRAVE Effects has somehow accumulated more phasers than any other kind over the years and that’s probably because the late 1970s and early 1980s experienced a surfeit of these simple analogue modulation effects. Let’s be honest, your average phaser really isn’t the most exciting of guitar effects compared to what else is out there, especially in these days of ubiquitous boutique eccentricities. The PT9 is pretty utilitarian and sounds OK, but not necessarily exceptional, which is probably to damn it with faint praise. I’m guessing that Ibanez chose to change their colour scheme from the previous blue/white PT‑909 Phase Tone to the orange/black PT9 in order to compete on looks with the all‑dominating and very orange MXR Phase 90 of the time. I had been on the track of a PT9 to fill a gap in the collection for a while, so the gap was duly filled. Original PT9s are still relatively affordable phasers and they are, perhaps, a good entry point for neophytes to get into vintage effects before getting into more exclusive and expensive fare. Time to move on… Next!

1981 Ibanez TS-808 Tube Screamer Overdrive Pro

… and here is the second iconic classic pedal procured in 2019. The otherwise ordinary green Ibanez TS-808 Tube Screamer Overdrive Pro rose to hallowed status via another guitarist association, this time with the inimitable Stevie Ray Vaughan. Like the Fuzz Face, the original vintage TS‑808s are now inordinately expensive on the vintage effect market, with prices increasing all the time. This was one of those times when I felt a ‘now or never’ moment and bagged a reasonably good one dating from 1981 at just below average price. At this point, I’m going to proclaim ‘emperor’s new clothes’ and say that, while it is undoubtedly a very competent pedal, does it really deserve the unchallenged accolades above all the other competent overdrive pedals out there? Just why we guitarists spend thousands of pounds/dollars on vintage instruments and vintage valve amps and then rely on some dirt cheap solid state components to make them sound ‘better’ is beyond me. To some extent, the same goes for the Fuzz Face but at least that is a down ‘n’ dirty fuzz pedal! I understand all the well‑rehearsed arguments about compensating mid‑boost and clean low gain drive into the front end of an already cooking valve amp. Perhaps I’m missing something else obvious but I really don’t think so. I also know that it goes against the grain to defer from perceived wisdom and to test the TS‑808’s seemingly unassailable reputation. Don’t get me wrong, I’m not knocking the Tube Screamer and what it does. I just believe it is somewhat overrated for the crazy market prices being asked. Anyhow, one of the green meanies is here now and is part of the growing ranks alongside other Ibanez ‘0’ and ‘9’ series pedals. At least I no longer have to keep scanning the market endlessly for a good one at a reasonable price.

1980 MXR Micro Amp

… and right back to the other end of the value scale again with a humble 1980 MXR Micro Amp. Essentially, all a boost pedal does is to increase the signal level hitting the front end of a (valve) pre‑amp, therefore not only adding a bit of volume, but also hopefully some natural compression and a bit of smooth distortion without affecting the underlying tone. Once again, there is something of a question mark about relying on a few cheap bits of electronics to make vintage gear ‘sing’. Having said that, the Micro Amp does its job perfectly well and it can be a really useful tool in the right circumstances. However, let us be clear that it is not exactly the most exhilarating or far out stomp box out there. As an idle observation, it is funny how things come round again given long enough. Outboard pre‑amp pedals are now a ‘big thing’ in the 2020s, albeit a bit more complex than this little MXR. There are many modern‑day compact pedal pre‑amps out there, including the Hudson Electronics Broadcast, Catalinbread Epoch Pre and Fredric Effects 150 Preamp. At least the unassuming little white MXR Micro Amp doesn’t take up much pedalboard space and is oh‑so simple in operation with only a single ‘Gain’ control. Like most un‑modified MXR pedals back in 1980, the Micro Amp only eats batteries for breakfast and doesn’t come with either an LED status light or DC input.

Help Needed

Vintage guitars, effects and amps need attention from time to time to keep them working at their best. While I can undertake basic maintenance, set ups and general TLC, I know that my skills are finite. I am looking for a guitar tech or luthier who can, from time to time, take on a vintage guitar and do some sympathetic remedial work, whether it involves fretwork, electrics, repairs or whatever. I’m also looking for someone who can do occasional work on effects and amps, which is basically electronics, switches, leads, soldering, etc. With over 60 vintage guitars, more than 50 vintage effects and 6 vintage amps, I need some expert help every so often. If there is someone out there with the requisite skillset for any or all of the above, and who is local to SE Cornwall in the UK, I would be interested in making a connection. Anyone interested? Please contact me at the e-mail address at the bottom of every page on the website.

Tailpiece

Actually, I think this is a good place to pause, so I’ll stop there for now. Nine guitars and five effect pedals is enough for one month.

At this point, I must stress that I did not buy any of these items as a pecuniary investment – anyone familiar with CRAVE Guitars will know that is not my motivation. However, given that savings accounts in the UK are currently offering just 0.01% interest rate, I would prefer to be broke and have great vintage guitars, amps and effects to play with and look at. The last recession that began in 2008 apparently saw 30% wiped off the value of vintage guitars, albeit temporarily. To me, it’s still a no brainer, when funds become available, eBay here I come for some vintage gear hunting. The other thing I would add is that all of the new additions are consistent with CRAVE Guitars larger strategic grand plan to conserve ‘Cool & Rare American Vintage Electric’ guitars, amps and effects as important musical and cultural heritage. Oh, and it’s also an unhealthy obsessive addiction as well but I guess you’ve sussed that out already.

At the top of this article I mentioned that there are three themes to work through and I’ve only covered one of them. I am conscious that the ‘History of Modern Music…’ series resulted in lengthy articles and this is, compared to them, quite short. I’m also a bit fatigued by the demands of lengthy researching and writing exercises. Thus, I’ll leave the rest for future article(s). I reckon that it is best to keep these reflective articles relatively consumable. Besides, there really is no rush, is there? Are we going anywhere, anytime soon? No, I thought not.

Believe me, there is still plenty of stuff to be getting on with here at CRAVE Guitars, so I guess I’ll be getting on with stuff then. Who knows what the world will be like in the coming months. Despite the continuing stresses and challenges of COVID‑19 et al, I hope that you’ll return here in due course for your prescribed diet of diversionary diatribes. Stay home, stay safe and stay (in)sane. Remember this simple but important mantra while civilisation unravels around us, Peace, Love & Guitar Music. Until next time…

CRAVE Guitars’ ‘Quote of the Month’: “I can see where this is going because I’ve been where it went.”

© 2020 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?
30 Oct 2018

October 2018 – A Potted History of the Guitar Part VIII

by | posted in: History, Introduction, Observations | 0

Welcome to what is, for now at least, the final part in this series of articles on the history of the world’s most popular musical instrument.

If you wish to recap on any or all of the previous seven posts before starting with this one, the whole ‘Potted History of the Guitar’ series, can be accessed here (each part opens in a new browser tab):

Having pretty much reached the present day, all that remains is to summarise where we are now and to take a somewhat flippant and imaginative look ahead. The ‘current day’ is a tricky subject, as ‘now’ is at best ephemeral. The future, on the other hand, can only ever be guesswork, even if it can be informed by the past. Perhaps the best way to predict the future is to help to create it, so that means that what happens to the next chapter of the guitar is in our hands. Can we be trusted to behave as responsible guardians of the guitar’s destiny? As Mahatma Gandhi (1869‑1948) said, “The future depends on what we do in the present”. This suggests that what will happen is not predetermined and individually or collectively, we can take action to shape the future.

There are not many images again supporting this article so, apologies to those who like pictures to speak a thousand words. Anyway, without further ado, on with the last part of the chronicle…

The guitar has come a very long way in the last 3,500 years or a road slightly less travelled in the preceding 350 years depending on whose version of the facts you want to believe. The story has finally reached that pivotal moment that lies between the past, which is, on the whole, pretty well documented and the future, which of course isn’t. There is much to be played for and the stakes are certainly high.

It is hopefully of little surprise that the future of the acoustic and electric guitar, as well as all its derivatives and distant relations, is probably well‑assured, at least for the foreseeable future. Whether it survives in the (very) long term or not, the world’s favourite musical instrument is undeniably going to be a hard act to follow, let alone surpass.

As with many industrial and technological revolutions, predictions have proved variable in terms of accuracy. As time passes, change tends to accelerate in both pace and scope. While progress may be inexorable, there is an unseen ‘force’ that tends to counteract unbridled advances and which acts as a bit of a restraint. That set of reins is the very human tendency to hold onto what is familiar while resisting change until it is either inescapable or desirable. This natural ‘drag’ effect has laid waste to many grand ideas and great inventions. Numerous well‑marketed ‘next big things’ have fallen at the hurdle of persuading the general public to take up something new or unfamiliar, especially if one’s respected peers haven’t bitten the bullet of early adoption either. Mankind’s flawed history is littered with countless failed marvels. This phenomenon isn’t, I hasten to add, just a trait of idiosyncratic musicians; it appears to be a fundamental characteristic of the human condition.

Anyway, as usual, I digress. It is time to get back to the point which is basically that whatever you read from here on has absolutely no basis whatsoever in fact and is highly likely to be extremely wrong! My consolation is that few people will regard it as portent or look back to judge its accuracy in a century’s time. There is nothing genuinely prescient here in the vein of Da Vinci or Nostradamus. Apologies if you were hoping for more in the way of a profound visionary insight. Unfortunately, my stock of that ran out last week.

General indicators of change

It is fair to suggest that popular music is often representative of, and in turn is dependent on, broader social, cultural and political movements, and guitars follow in their footsteps. Whether we like it or not, music is integral to our everyday lives, so it is not surprising that it is also inherently powerfully evocative. As a result, it can dramatically affect the way we identify with past events.

One of the key factors that drove guitar evolution has been the trends in popular music, so perhaps musical trends may provide a much generalised hint at parallel guitar developments. Let’s start by considering the (very simplistic) genre movements and the types of instrument used over the last century.  Starting with the post‑classical era, there was jazz (Gibson archtops) and blues (National & Dobro resonators) in the 1930s and 1940s, country and rock ‘n’ roll in the 1950s (Gretsch & Gibson hollowbodies), pop and rock in the 1960s (Fenders and Rickenbackers), progressive and heavy metal (Gibson solid bodies) and then punk (pawn shop guitars) and hair metal (pointy super Strats) in the 1970s. Then we get to the guitar doldrums of electronica, new age and rap in the 1980s, followed by revitalised guitar music of alternative, grunge in the 1990s, and indie (retro guitars) nu‑metal (PRS) and dance in the 2000s, etc. I struggle to think of a musical genre that so far defines the 2010s or perhaps many distinctive guitars to go with them. So there is some kind of link going on here. Google has attempted to map the progression of musical genres from 1950 to the current day (take from it what you will).

The type of guitars de jour used by famous musicians, including artist associations, during these epochs often reflected the style of contemporary music they played and these have largely been well covered in previous parts of the story. Just think of Chet Atkins with his Gretsch 6120, Buddy Holly with his Fiesta Red Fender Stratocaster, The Beatles with their Rickenbacker 300s, or Jimmy Page with his Gibson Les Paul Standard and EDS-1275 double neck. The various interconnections are manifold and too many to mention here, and many have been captured in photographs to become iconic in the annals of rock history.

Cinema and television music regularly use key songs to catapult us back in space and time without the need for narrative exposition to describe what’s happening. Just think about classic movies such as American Graffiti, Stand By Me, Almost Famous, Saturday Night Fever, The Breakfast Club or 8 Mile among many, many others. Those random examples don’t include the numerous biopics (e.g. Sid & Nancy, Walk The Line, The Doors) and musicals (e.g. West Side Story, Grease) or original scores (e.g. Paris Texas) that use familiar, memorable and/or popular music to transport us to another ‘reality’. Then there are the one‑offs like the mockumentary, This Is Spinal Tap. TV programmes also picked up the strategy for domestic viewing since the 1960s and often featured manufactured artists such as The Monkees or The Archies. The lists of relevant examples are endless. Music is used to draw the viewer into the director’s vision of a certain bygone era. Many of the sound tracks of our lives rely heavily on evocative (guitar) music to manipulate us emotionally and, more importantly, intentionally.

The way that environmental factors affect local communities may spark a genre direction that is then promulgated more widely. For example, one could point to the rise of electric blues in Chicago, soul in Detroit, Mersey beat in Liverpool, punk in New York and London, rap in Los Angeles/Philadelphia, or grunge in Seattle, etc. What we cannot predict is what or where any future musical revolutions (if any) may emerge, from where, and what step‑change responses guitar builders may then make.

As with many other aspects of our 21st Century lives, the nature of music, how it is made, distributed and accessed suggests that anything genuinely ‘new’ will find it much harder to stand out from the mainstream. What is already there will continue in some form and anything new will simply be added to it, often at the margins of existing genres, hence the proliferation of sub‑genres, e.g. thrash or nu-metal in rock; house and techno in dance; raga and dancehall in reggae; dubstep and grime in urban music, etc. One only has to compare and contrast the mind boggling varieties of heavy metal music and then consider how they continuously diverge, converge and cross‑fertilise in order to keep it fresh and vibrant.

While some technological change may be more predictable, social change and the music that characterises it is certainly more unpredictable. When one looks at something as specific and tangible as the guitar, it becomes increasingly risky to anticipate with any certainty what change may occur over an extended period of time, say the next century or so.

One view is that we are powerless and don’t need to think about it, as what will be, will be. Another is that we wait passively and be subject to what transpires with little or no influence over it. A third way may be not to accept the status quo and take positive action to stimulate change, which can happen in oddly random ways. Being of an opinionated sort, I tend to fall into the latter camp. Apologies, that probably actually doesn’t help much!

Perhaps the biggest challenge to the guitar’s supremacy is likely to lie in the digital revolution that really started to make an impression in the 1970s and 1980s. Part of the reason for the guitar’s seemingly unassailable success has been that it is a hugely expressive and flexible instrument, which actually makes its nuances extremely difficult to replicate in a world constructed entirely of binary 0s and 1s. We shall see whether digital advances can fully overcome the difficulties in recreating the subtleties provided by a very analogue instrument in the hands of discriminating (and generally quite conservative) musicians.

The evidence so far suggests that digital is making ever increasing inroads into the analogue guitar’s dominance and the discernible gap between analogue and digital output is decreasing all the time. How long will it be before even the most ardent luddites finally admit that they can’t really tell the difference (despite what they may say outwardly)? However, it isn’t just the sound of guitars that appeals to guitarists; it is also the feel and the look of them that matters, as well as how they allow musicians to communicate with each other in unspoken ways.

New generations of guitarists, however, may be looking for something very different from their predecessors.  What form will ‘the shape of things to come’ take? Will it be all hyper‑modernistic and crammed with tech and flashing lights and built from materials we cannot yet imagine, or will it be the same old bits of tree wood crafted into the familiar shapes of Telecasters, Stratocasters, Precisions, Les Pauls, ES‑335s and SGs that we covet today? Only time will tell how things pan out and it will be for future authors to use the convenient assistance of hindsight to determine and document what path the history of the guitar takes from here on.

Looking and learning from the past, one might simply extrapolate forward. Future guitarists may well be like their ancestors and pragmatically seek to mix the best of the past with the best of what’s to come, regardless of whether it is analogue or digital. My personal prediction is a typically ambiguous ‘sit on the fence’ one, in that guitars will probably become increasingly hybrid if they are to keep ahead of other comparable instruments. Let’s face it, there are not really any threats` to the guitar’s dominant popularity at the time of writing and it has always been a continuously evolving instrument, so it would be of little surprise if this were to continue. While the 1980’s temporary trend for synth and electronica attempted to eradicate guitar music in the minds of popular listeners, the guitar has proved very resilient and difficult to displace.

Since the 1970s, the guitar has been used to trigger digital electronics. However, while both signal tracking and polyphony still present problems, these barriers are gradually being overcome. There have been several attempts to introduce effective guitar synths over the years but they have really been analogue or digital filters activated by either an ordinary guitar pickup or by discrete signals from a hexaphonic pickup. Hex pickups, which output a separate signal for each string, were often added to an existing guitar and used to transform it into a MIDI (Musical Instrument Digital Interface) controller while still able to be used as an ordinary guitar. MIDI was a standard specification published in August 1983 by Japanese electronics giant Roland and American synthesizer company Sequential Circuits, and is commonly used to control electronic audio equipment. While attempting to revolutionise guitar music, Roland’s excursions into guitar synths since the 1980s have still relied on a standard guitar as its starting point.

Other Japanese companies specialising in electronics have also experimented with MIDI control of external synthesis engines, for instance guitars from Casio (DG20) and Yamaha (EZ-EG). It seems incredible to think that these early electronic instruments are now being considered as ‘vintage’. Today, there are now plenty of guitars on the market with MIDI capability built in. Technology has moved on and the fundamental concepts of a digital source are now ripe for being reinvestigation and improvement.

Other pioneering companies such as Line 6, now owned by another Japanese giant Yamaha, introduced their ground breaking digital modelling preamp (the Pod) and digital modelling guitar (the Variax) to indicate the direction in which development might go. Line 6’s philosophy inspired and influenced subsequent successful products such as the Kemper Profiler and the Fractal Audio Systems Axe-FX. Computer control of complex parameters, presets, firmware and downloads are commonplace for amps and effects in the 2010s and we can certainly expect this trend not only to become de facto but also to become a requirement in the near future, so a laptop at live gigs is already almost a necessity to keep your rig running smoothly – not a comfort zone for many analogue technophobe musos.

Guitar making cannot stand still and neither should it. Even the companies with a century or more of history, such as Gibson, Gretsch and Martin, have to keep moving forward or risk being overtaken. However, the tightrope of appealing to customers who appreciate the heritage is also key to the future success of long‑established manufacturers. Newer, smaller companies, though, are not constrained by the time capsule factor.

It is probably safe to say that the future is likely to be a practical symbiosis of both the familiar to satisfy the conservative traditionalists and the whizzy new gizmos to appeal to the technologically savvy experimentalists and neophytes… just as it always has been if fact. Even Gibson has been toying with the addition of digital features into its guitars, including the Les Paul HD.6X Pro and the Firebird X models. Intriguingly, Fender and other major brands have yet to declare their hands. It will be the fine balance between the opposing forces that will enable lasting incremental change, via ‘chimera’ guitars, rather than a number of fundamental radical shifts. That eventuality could prove a bit boring though, don’t you think? However, sadly, it also seems to mirror the way that modern popular music is going as well?

Leaps of unadulterated conjecture:

This next section is pure fantasy and should not be relied on as authentic in any way. It came from an idea that it can sometimes be fun to imagine what things might be like in some near or distant future. One hopes, though, that what follows doesn’t come to represent some form of self‑fulfilling prophecy.

It may be that the guitar itself could become superseded by something completely different from what musicians (rather than video game players) use today. Could it be possible that something along the lines of the PlayStation ‘Guitar Hero’ controller may someday make inroads into real instruments to create real music? I would anticipate that the majority of guitarists would sincerely hope not.

There are already some very modernistic looking instruments out there, such as the HTG Hyper Touch and the Misa Kitara (note the use of the Greek name kitara from Part I of this long story). Are these all‑electronic ‘guitars’ the sorts of instruments that will replace our beloved classic designs and become de rigeur in the near future? Alternatively, perhaps the electric guitar could somehow morph into some form of fully digital instrument via the route of hybridisation. As a logical conclusion, is the ‘Digital Guitar’ with analogue playability a holy grail and, if so, for whom? Here are some current digital guitar innovations from the 2010s…

So… suspend your disbelief for a few minutes and take a tentative look ahead to the scary world of AIs, AAs, AVs and AM (spoiler alert – these acronyms may seem familiar but in this context, they don’t mean what you think they mean today). You will be assimilated. Resistance is futile. Read on…

10 years’ hence (c.2028):

Analogue vs digital – Digital technologies will be used increasingly to enhance the analogue signal chain rather than usurp it completely. We have already seen many examples of this appearing in effects and amps, so there isn’t really any clever insight in mentioning it. Digital control of analogue signals is already becoming commonplace especially in delay and modulation effects where digital manipulation gives much more precise control over what happens in the analogue domain.

It remains unpopular to sample the original signal through an analogue to digital converter (ADC), mess around with it and then put it back through a digital to analogue converter (DAC) to turn it back into a signal for further processing. Many purists say that the act of conversion using today’s chips taints the original signal. It will be a while longer before we make that bold step of a fully digital signal chain from fingers to ears but it is getting ever closer. It will happen but possibly not by 2028, mainly because of the difficulty in engineering effective fully digital instruments and loudspeakers.

Research will continue to develop a truly digital guitar ‘pickup’ that could compare to current electromagnetic pickups and provide the first step to more complex processing in the future. Digital modelling using DSP (Digital Signal Processing) chips will continue to improve and will become almost indistinguishable from analogue electronics in effects, amps and digital audio workstations (DAWs). There will be a hardcore fan base that remains wedded to the old school stuff for many, many years to come. The guitar itself is highly unlikely to become fully digital in the next 10 years, if only because there are far too many dogmatic people invested in preserving the status quo. Auto‑Tune for the guitar anyone?

Guitar Making – In the near future, it is highly unlikely that wood will be superseded by any other material as the primary input for the majority of guitars. Wood has proved over millennia to be a very flexible, durable renewable material. Let’s face it, it can also look wonderful. One major advantage of wood is that it contributes towards the organic tone and touch of an individual musical instrument. Many alternative materials have been used in the construction of guitars since at least the 1920s, including plastics, metals, carbon fibre and a wide variety of composites. To‑date, though, wood has prevailed in terms of structural integrity allied to inherent musicality. What will change, though, is the shift away from the use of endangered exotic hardwood species such as rosewood, ebony and even mahogany to more sustainable species. For instance Pau Ferro (Libidibia Ferrea, a.k.a Bolivian rosewood) is rapidly replacing the CITES‑restricted rosewood (varieties of the genus Dalbergia) as a popular fingerboard material. Quite how fussy musicians will accept unfamiliar wood substitutes, will be determined in due course. What is clear is that guitarists really have no choice but to go with the ecologically acceptable flow in the long‑term.

Like their classical musical counterparts, the guitar itself (whether acoustic or electric) will remain very much a natural instrument for a good few years yet. The guitar will still be supremely popular and will be making great music all over the world. Guitars will be made by a broad range of entities from one man band local custom luthiers up to multinational mass manufacturers. Competition, particularly from China, will be a threat to many established western companies until their economic bubble bursts, which it eventually will at some point.

Recorded music – The vast majority of recorded guitar music will be produced on digital equipment with a few retro studios still using analogue equipment including valve preamps and tape machines. The relative accessibility of convenient digital recording equipment will continue to provide openings for all sorts of artists from the home musician to the professional mega bands using famous dedicated studio facilities such as the famous Abbey Road Studio in London. Recorded music will be increasingly distributed and accessed online, although legacy formats will maintain a solid niche popularity.

Live music – Live music will continue to grow in popularity to become the cornerstone for many successful artists, provided that they do not price themselves out of live appearances and that over‑zealous regulations don’t stop large live events from taking place. PA and monitoring systems will continue to improve significantly and sound pressure levels at venues will be severely restricted, removing some of the visceral excitement of the live music experience.

30 years’ hence (c.2048):

Analogue vs digital – Digital will be the primary domain in which music will be made, recorded, distributed and accessed. The guitar will remain analogue, although it is likely that the entire chain from the pickup onwards will be predominantly digital. However, as with current classical instruments and music, there will still be an important place for traditional analogue guitars. Amps and effects are likely to be almost totally digital. Successors to the analogue electromagnetic pickup and the loudspeaker will be introduced to a point that digital sound will be common if not universal. ‘Old fashioned’ guitars will remain very popular and will experience regular revivals and rejuvenations, even if the overall battle will be won by the digital technologies of the 2040s. New digital connectors will proliferate, as the currently ubiquitous USB port will long since have been superseded, and the jack pug/socket will be purely of vintage interest.

Guitar making – Most of the large manufacturers will be producing some sort of digital instrument as the norm, even if the vital interaction between fingers and strings will remain as it is now. All guitar tone woods will be derived from sustainable sources by strict regulation and use of rare species tightly controlled (outside the unavoidable black market). The use of alternative materials will be in full swing, reducing the reliance on today’s natural materials. New guitars will be built to be recyclable. Automated manufacturing will be the norm and the demand for traditionally made guitars will be catered for by numerous specialist guitar builders. Pure wooden analogue guitars will be vintage only and regarded with the same respect as classical instruments are now. Guitar development will be relegated to refinements around the margins, rather than core revolutions. Hybrid instruments will be fighting a rear‑guard action, with digital beginning to win the final battle. Competition to the guitar will continue but will not succeed… yet.

Recorded music – Digital will almost totally dominate recorded music production, distribution and access. Diehard analogue fans will be regarded as geeks and nerds. Vinyl albums will, however still persevere… just.

Live music – Like recorded music, live music will be, apart from the musicians themselves, almost universally digital. ‘Loud’ live music will be a thing of the distant past. Music venues will begin to disappear as discrete locations, with personalised performance content delivered direct to the individual.

50 years’ hence (c.2068):

Analogue vs digital – Analogue guitar music will be like classical music is today, a popular, niche and a largely historic pastime. All other aspects will be digital.

Guitar making – Standardisation and construction will be largely prescribed. Hybridisation will just about have peaked and on its way out. The majority of guitar production will move towards making AIs (Artificial Instruments). The focus will be on the technical facets of music making, rather than subjective, emotive ones. Guitars as we know them now will be of heritage interest.

Recorded music – Music will be manufactured in the digital domain with just a few maverick analogue‑obsessed musicians beavering away in the minority. The vast majority of contemporary recorded music will be created electronically, with few outmoded musical instruments as we know them now being used. Many artists will be AAs (Artificial Artists), rather than by artistically inclined human beings – the latter will concentrate on performing historic pieces from the golden heyday of guitar music.

Live music – There will no longer be a need to travel to a discrete venue where music is performed in person to a collective audience. ‘Live’ music will be created in computers, customised to an individual’s tastes and accessed in the home, in a domain known as an AV (Artificial Venue) giving the sight, sound and feel of a venue.

100+ years’ hence (c.2120):

Analogue vs digital – Analogue guitar music will be an historic vocation and largely a lifestyle pastime. All other aspects of ‘modern’ music will be entirely digital. Some authentic old‑style music will be recreated on historic instruments for research purposes, rather than as entertainment.

Guitar making – Even the last few old‑school luthiers will be migrating to alternative materials, automation and digital electronics. Hybrid instruments will be seen as a thing of the past. AIs will be commonplace and there won’t be a need for human musicians to learn the art or skills needed to make any type of contemporary music.

Recorded music – Popular music will be artificially created without the need for accomplished musicians. Music will be constantly morphing on a second‑by‑second basis, known as AM (Artificial Music).

Live music – Performance capture will be produced electronically and experienced direct by the listener’s visual and audio receptors, bypassing the unreliable eyes and ears altogether. Finally, the digital signal path from computerised source to the recipient’s brain will be complete and will require no human intervention whatsoever.

Alternative Reality

Or… in some alternative, perhaps more desirable dimension, the unwritten future could well be pretty much as it is today, with new generations doing just what we do now, rocking to good old electric guitar music. To many guitarists, the tactile and synergetic relationship between musician and his/her guitar in full flow with other musicians is unbreakable and simply cannot be usurped by some dystopian digital future scape.

One trusts that there will always be a place for creative artisans and a desire or the musically minded to enjoy the fruits of their vision for the guitar of the future. It is encouraging that many well‑known guitar makers are actually stepping back in time in order to move forward. This isn’t the paradox that it may first seem. Savvy guitar builders are investigating in great depth what made great guitars great in the first place and identifying what musicians actually want from their instruments today. Much of this current R&D is leading to a number of findings that indicate that what was important 100 and 200 years ago (and probably longer) is still important today but with modern consistency and reliability.

Perhaps the past masters did get it largely right in the first place and that is why their products, new or vintage, are still desirable artefacts today. While traditional manufacturers like C.F. Martin use modern production methods for some parts of the building process, they are also still using tools and equipment employed by successive cohorts of luthiers, as well as relying on many of the basic techniques and skills refined and passed down from one generation to the next. Most of the top flight guitar builders also work very hard to ensure long-term supplies of precious tone woods to make into future guitars. This focus on the best‑of‑the‑best perhaps suggests that guitars may well remain, for the large part, relatively familiar in 10, 30, 50 and 100 years from now but with improvements to the detail. Perhaps it takes that bold flight of fancy to realise that we already have what we and future generations of musicians actually need. Owning inspiring guitars inspires guitar playing and results in inspiring guitar music.

There really is no point in speculating any further ahead. The likelihood is that, even with advances in medical technology, most if not all of us reading this in 2018 will not be around to see anything beyond c.2020. The guitar is dead, long live the guitar. The passage of father time will inform just how accurate these flights of fantasy (or descents into nightmare) really are. Clearly, the further one looks into the future, the less precise any predictions become. Welcome to tomorrow’s very scary ‘brave new world’.

I, for one, am certainly not laying any bets. I’d like to think that there is something about our very personal instruments that will endure for many decades, if not centuries. If we lose that quintessential ‘something special’ about making guitars that make guitarists that make music, it will all have been for nothing. Watch this space.

Conclusion

So, that’s it. The long‑running and on‑going story of the guitar has finally reached a logical stopping off point, at least for now… However, it not the end of the story by any means. Somewhat disappointingly, the denouement to ‘A Potted History of the Guitar’ series seems to be a bit more of a whimper than some almighty bang. After so much history and so much personal investment in researching it, it seems a bit of a let‑down to leave the guitar’s evolution ‘hanging’ without some sort of definitive resolution to the script and with the various loose ends neatly tied up. Nevertheless, remember that this is not a fictional piece and let us not forget that this is definitely not the epilogue.

‘They’ say that a picture speaks a thousand words. So, to sum up the 3,500‑year, 8‑part journey in a single image that tells the story of the guitar from its origins to the possible near future, here is a fitting 27‑picture montage that possibly speaks approximately 50,000 words. Basically, I could have saved 9 months of my life and just posted this one composite picture. That, I guess, is one of the benefits of hindsight. I hope that you’ve enjoyed the expedition with me and that, like me, you have learned a little something about the guitar along the way. You wanted a potted history of the guitar? Well, how about…

From this point in time onwards is the start of the future and, whatever happens next. It will be fascinating to experience the on‑going next instalment of the long story and to observe with trepidation and excitement what is to unfold. Let us try to make it a bright and positive outcome for everyone who loves The Guitar and Great Guitar Music. Thank you for reading. Enjoy the future, whatever it holds for us guitar aficionados.

End of Part VIII and the end of this series

Now… I need a break from the relentless rigmarole of the research and write routine, which has, for the best part of a year (or more), been on top of everything else. As mentioned previously, at some point, I might adapt the eight separate ‘Guitar History’ parts into a more coherent and accessible feature set on the CRAVE Guitars’ web site.

Very shortly, I will try and start to prepare for 2019’s (hopefully slightly less) epic partner piece to this year’s gargantuan opener. For the rest of this year, it is back to opinionated hum‑drum ‘normality’ with stand‑alone observations of a more topical and transient nature.

One thing I have noticed is that I haven’t been playing enough guitar in recent months, hardly any at all in fact, which is deplorable. So perhaps now that this particular endeavour is over for now, it’s time to practice what I preach, pick up a lovely vintage guitar and plink away for a bit of cathartic enjoyment. At least, in doing so within the context of the past, I now have an enhanced appreciation of the history that led to it coming into my hands and why it is so important to conserve the heritage for that future. Until next time…

CRAVE Guitars ‘Quote of the Month’: “Let’s be honest, the future is all we really have and it is the only thing we can do anything about”

© 2018 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?
29 Sep 2018

September 2018 – A Potted History of the Guitar Part VII

by | posted in: History, Introduction, Observations | 0

Welcome back to the latest in a long series of articles chronicling the history of the world’s favourite musical instrument. Last time, we covered the advent of production solid body electric guitars during the guitar’s ‘golden era’ from c.1950-1965. That article also covered some relevant later events, but the essence was about a period of intense invention and creativity, hence why it deserved a separate article dedicated to it, even though much of the content would be familiar to many.

This month’s article mostly focuses on ‘what happened next’ between c.1965-1987, although it does also cover the subsequent period up to the current day, albeit in less depth than the earlier years. Depending on how the rest of the story is covered, this 7th part is likely to be the penultimate episode.

If you’ve been following the various twists and turns along the way, you’ll know that I have tried very hard to strike a balance between light entertainment for the general reader and the level of detail that would appeal to the needs of the nerdiest of guitar geeks out there. As previously stated, this is not an academic thesis – I just don’t have the time or resources to reference every element along the way, so it probably will never make it into book form, which is a bit of a shame but ç’est la vie. However, once the 3,500 year history has been finished, I may try to bring it all together as a ‘box set’ feature on the web site, so it will be easier to find and come back to than monthly instalments. It also provides the opportunity to correct the content. I may also add a bit off the original longer version back in (!!) and to balance the various parts as a more coherent whole.

You may wish to recap on previous articles before starting here at Part VII. If so, the previous segments of ‘Potted History of the Guitar’ series, can be accessed here (each part opens in a new browser tab):

I hope that you’ve enjoyed the journey so far and will stick with it for just a little longer. For me, it has certainly involved a huge amount of hard work researching and learning along the way. There is an enormous amount of information that had to be excluded in order to make it digestible in an online format. As always, while I have been diligent, some errors and omissions will inevitably have crept in. Not only do I apologise if that is the case but also, I welcome feedback from readers in order to correct or clarify. I would also encourage readers who might wish to look at things either from a different perspective or with a different level of detail to explore the fascinating world of guitars for yourselves.

There are not many pictures this month, as the subject matter is largely narrative‑driven. Sorry about that, photo fans.

Post-Modern Reconfiguration, Rejuvenation and Consolidation

It has become generally accepted that the electric guitar’s so‑called ‘golden era’ started at the beginning of the 1950s with the introduction of Fender and Gibson’s solid body electric guitar models and ended in the mid‑1960s around the time that Leo Fender sold up in early 1965, followed by Gibson in 1969.

On the face of it, the years immediately after the mid‑1960s would appear to be of little historic interest, particularly as far as investors and ‘serious’ collectors are concerned. While the 1950s and early 1960s have been very well documented in countless learned tomes, the subsequent years have tended to be characterised by vociferous opinion and anecdote in a relative vacuum, rather than subject to objective scrutiny.

The Internet has, perhaps unsurprisingly, encouraged many already polarised opinions to become even more extreme. Assertive and often throwaway hyperbole of many self‑appointed ‘experts’ has possibly been consistently exaggerated to the point that they have gained some sort of historical validity. Widely read ‘unpopular opinion’ is often misinterpreted as indisputable definitive evidence. It isn’t gospel; there was more to it than what many would have you believe.

This version of the ‘facts’ is arguably simply that and, while every effort has been made to remain impartial, it should be read with a degree of realistic scepticism. This doesn’t mean that there wasn’t some ‘smoke without fire’, just that the flames may have been fuelled by circumstances and intensified by ill‑informed prejudgment.

The music industry wasn’t alone in coming in for acerbic over‑criticism; the American automotive industry was also subject to similar issues during 1960s and 1970s. The parallels extend beyond the superficial with the demise of many historic car brands and the inexorable rise of Japanese competition. As with guitars, some of these old models are now becoming highly sought after. The guitar industry during the latter part of the 20th Century, it seems, was symptomatic of wider deep‑seated socio‑political problems in the world’s largest capitalist economy.

Actually, ‘what happened next’ is an equally fascinating tale and one that is worth spending a little while looking at. At the same time, it’s also worth standing back and looking at the bigger picture as events unfolded. While it’s all a matter of degree, what transpired was rife with intrigue and machination. The appeal of these transitional years is one of the reasons that CRAVE Guitars tends to focus on ‘forgotten underdog’ and quirky cool American electric guitars from between around 1960 and 1989, although not exclusively.

Was that all‑too‑brief 15‑year ‘golden era’ the end of the story? Will guitars built in the ‘dark ages’ between 1965 and 1987 remain ignored most as gross errors of judgement? Will there be another defining period of electric guitar evolution or will musicians spend their lives experiencing mediocrity by default while harking back to that unobtainable time viewed through rose‑tinted spectacles? Perhaps digital technology will deliver the next step‑change with some Darwinian mutation that future writers will look back upon and write about. OK, enough of the rant, on with the story…

The Catalysts

The trouble really started once both Fender and Gibson been acquired by faceless corporations used to running commercial businesses, rather than important customer‑led operations. Despite post‑war prosperity and growth, the period between the mid‑1960s and the mid‑1980s could possibly be described aptly as eventful and tempestuous. In hindsight, whichever way you look at it, the sale of the industry’s ‘big guns’ was a 20th Century watershed for guitar building.

Firstly, let’s take a quick look at what actually happened immediately after the ‘golden era’ drew to a close circa 1965. The subsequent corporate merger & acquisition activity impacted directly on American musical instrument manufacturing up to the end of the 1980s. A few choice examples may help to illuminate the significant strife that befell the industry for a couple of decades (in rough chronological order)…

Rickenbacker – The only one of the major American brands that didn’t ‘sell out’ during the 1960s was Rickenbacker. They had, in some ways dodged that particular bullet, as Adolph Rickenbacker had already sold his company to music industry businessman Francis C. Hall in 1953. In retrospect, the move to transfer the undertaking and to keep it in safe hands seemed both pre‑emptive and positively prophetic. Arguably, the timing enabled Rickenbacker to capitalise on 1950s creative growth and become more resilient to what was to come. RIC (short for Rickenbacker International Corporation) has remained under the ownership of the Hall family since 1953 with John C. Hall as CEO at the time of writing.

Fender – After Rickenbacker, Fender was the first of the big names to capitulate to big business ambition. In 1965, Leo Fender sold his company to CBS (Columbia Broadcasting System) for just over $13m. The reason often given for the sale was Leo Fender’s health, although an injection of capital funding probably was also contributory. Other perspectives cite Leo Fender’s desire to pursue new ideas, which he possibly couldn’t do while running the company. CBS started making changes almost immediately and expanded capacity at Fullerton to increase supply. By agreement, Leo Fender was prohibited from setting up another music instrument company for 10 years, after which he went on to found Music Man (1974) and then G&L (1980). After 20 years under CBS control and on the brink of total collapse, division president William Schultz bought the company, forming Fender Musical Instruments Corporation (FMIC) in 1985. What followed was a period of intense restructuring, with guitar production temporarily moved to Japan for approximately two years before resuming full American manufacturing with the launch of the American Series guitars in 1987. U.S. manufacturing was moved from Fullerton to Corona, California and its headquarters were relocated to Scottsdale, Arizona. Fender was once again back on the path to success as an independent company and has remained so ever since.

Danelectro – Danelectro was originally formed by entrepreneur Nathan Daniel in 1947. Daniel built his business on the back of large scale, low cost department store and mail order demand for electric guitars, often branded as Silvertone and Airline. This enabled him to start building instruments under the Danelectro brand from 1954. By 1966, Daniel sold Danelectro to industry giant MCA (Music Corporation of America). MCA tried unsuccessfully to introduce the Coral brand and to restructure its distribution network. The outcome was that Danelectro ceased production altogether just 3 years later in 1969. The brand was resurrected by the Evets Corporation in the late 1990s and, after several faltering attempts to recapture market share, Danelectro remains in operation as a successful American company with overseas manufacturing based in China and Korea.

Gretsch – Gretsch was originally founded by Friedrich Gretsch in 1883. Two years after Fender and one year after Danelectro, Fred Gretsch sold the family business to the Baldwin Piano Company in early 1967. After many organisational troubles including relocation, factory fires, Chet Atkins withdrawing his endorsement, and misjudged model decisions, Baldwin finally ceased production of Gretsch instruments by 1981. Fred W. Gretsch acquired what little remained of the company in 1985, basically just the Gretsch name and rights ownership. After a number of abortive efforts, consistent output was eventually re‑established in Japan. Rockabilly guitarist Brian Setzer became a key endorsee for Gretsch in the 1990s and consumer interest in the brand was rekindled. Retaining family leadership, Gretsch has been under the patronage of Fender since 2002 and the famous brand is once again a significant player in the guitar industry.

Gibson – Gibson was really the last of the large American names to succumb to corporate ownership. Gibson’s parent company, Chicago Musical Instruments Ltd (CMI) followed the competition in 1969 when Gibson was taken over by a South American brewing company called ECL and then subsumed by Norlin Musical Instruments in 1974. Gibson survived cost‑cutting, relocation to Nashville and general mismanagement largely intact, although its hard‑earned reputation was severely tarnished. Gibson eventually returned to private ownership in 1986 through a consortium management buyout. Despite a major financial crisis and bankruptcy protection initiated in May 2018, there are signs of a positive future for the company.

These were just some of the big players who were able to weather the economic storms during the second half of the 1960s through the 1970s and into the 1980s. In addition to the big names, plenty of other well‑known American companies failed to survive, including:

  • Valco merged with Kay in 1967; a move that included familiar names such as Supro and Airline. However, the newly combined company went bust in 1968
  • National Dobro merged with Mosrite before the latter went bankrupt, also in 1968
  • Harmony lasted until 1975 before it ceased trading

Those that survived the volatility would continue to fight for survival at best. Overall, when viewed in hindsight, it proved a disastrous phase for American guitar making and collectively one that isn’t widely documented, other than in individual circumstances. The ‘golden era’ was, seemingly, definitely over.

As is often the case, the causes of American guitar manufacturing woes between the mid‑1960s and the mid‑1980s are quite complex, based on deep‑seated structural flaws. Looking at the circumstances strategically, there were probably, amongst many other contributory factors, five key issues…

  1. Industry structure and stability – Inward investment and backing of large business should have provided a positive commercial injection to guitar companies who were either struggling with financial difficulties or were unable to grow quickly enough with existing management structures. What actually happened was that big businesses, as is their wont, were looking to cut costs and increase profit, seemingly unaware of the impact that they were having. The large companies tried to stimulate demand by experimenting and introducing new products without assessing whether what they were making was adequately meeting consumers’ needs. For small agile companies, risk taking was a vital part of the creative process, while the bigger firms focused on large scale, efficient production methods, conversely heightening the risks of failure. Remote and disconnected governing bodies tended to dictate business decisions based on balance sheets and shareholder return, rather than customer satisfaction. Arguably, though, the businesses were in dire need of ‘better’ rather than ‘different’ management both before and after takeover.
  2. Industrial relations – Strict operational disciplines, controlled production processes and rigorously applied policies are a fundamental requirement of larger bureaucratic organisations. These management styles were generally not part of the music industry’s ‘way of doing things’ at the time. Companies needed to be managed effectively rather than efficiently and, unfortunately, the pendulum swang too far towards the latter. Business managers exhibited a flagrant disregard for the expertise and skills required to make consistent, high quality musical instruments. Production facilities were relocated, often giving long‑term highly experienced luthiers a ‘move or go’ ultimatum. In addition distribution and dealership networks were changed with little regard for what went before. Unhappy employees and belligerent trade unions led to heated industrial disputes (and worse), thereby causing significant leadership and management problems. Decades of accumulated knowledge, skills, expertise and, perhaps importantly, attitude were lost to the industry in a short space of time – something that would take years to rebuild. The outcome was that quality fell, exacerbating existing deficiencies elsewhere in the industry.
  3. Industry culture – New corporate owners did not fully appreciate or take the time to understand why the guitar industry worked as it did, resulting in fundamental mistakes internally and externally. The latter disenfranchised those involved in the supply chain from distributors to dealers and, ultimately, impacting on paying customers. Crucially, working musicians’ requirements were not being met and, with that dissatisfaction, brand loyalty diminished as professional guitarists looked elsewhere for alternatives. In addition, musical tastes were rapidly changing and short‑lived fads required nimble organisations that knew how to adapt to changes quickly and appropriately. Smaller companies that were better‑tuned into what was going on could flex more easily. The larger corporations, however, were unable to spot change and respond, leading to mismatches and time lags between demand and supply. Many commentators suggest that it was because musicians weren’t running the show. However, guitarists don’t necessarily make good business people (or vice versa!), which might have contributed to the difficulties. Significantly, two of the most influential guitar innovators – Leo Fender and Ted McCarty – didn’t play the guitar at all. Nevertheless, they were effective leaders because they ensured that professional artists were closely involved with business decisions. Importantly, the time when musicians were listened to and relationships were actively cultivated had fallen by the wayside.
  4. Supply problems – Availability of consistent materials, particularly the all‑important tone woods, created challenges for large‑scale American production. Variable density and therefore weight of some imported tone woods meant that it was difficult to manufacture to dependable standards. Depending on the combination of materials, the shortage of quality inputs affected builders to different degrees. Around the same time, sustainability and environmental factors were becoming an issue, leading to further supply issues. Manufacturers started looking to alternative materials including metal (e.g. Kramer, Travis Bean), plastics (e.g. Ampeg/Dan Armstrong) and composites (e.g. Gibson) that were intended to improve consistency and streamline manufacturing processes. Other moves included building guitars not from single pieces of difficult to acquire, expensive wood but from cheaper, smaller, more available cuts. Consumers saw such actions as negative and symptomatic of other perceived underlying problems. Unfortunately for the manufacturers, customers were not impressed by ‘good intentions’ and the changes were seen as cost‑cutting measures taken a step too far. Many consumers saw through superficial claims and resented the big companies for making what they felt were false marketing claims.
  5. Far Eastern competition – Enterprising Japanese companies, revitalised by post‑WWII recovery and able to observe from outside, spotted that American labour and manufacturing costs were contributing to a combination of poor quality and high prices – an equation that would present opportunities to penetrate a previously U.S.‑dominated market. Companies such as Ibanez and Yamaha did two crucial things. The first was to use their structural advantages to make high quality instruments at lower cost, and to produce them in large enough numbers to compete with American products on their own ground. The second thing they did was to brazenly copy iconic American designs, presenting consumers with recognisable products built to (generally but not always) higher standards and sold more cheaply than the American ‘classics’. There is more on the Japanese competitive assault on American guitar makers below. They also used rapidly changing music trends to create openings for entirely new products, including their own designs, thereby beginning to build a strong and more ethical reputation of their own. When the inevitable backlash came (see below), the marketplace had already changed fundamentally.

Lawsuit Guitars and Trademark Protection

During the post‑1965 period, sales of major American brand guitars was in decline and the home industry was in disarray. This provides a broad background against which American companies had to contend. Generally speaking, the way in which the industry and marketplace was organised was not favourable for the likes of Fender, Gibson, Gretsch, Rickenbacker and many others.

The takeovers and general (mis-)management of American firms left the U.S. industry weakened and susceptible to aggressive business manoeuvres. American labour, tooling and material costs didn’t fall, so prices for finished instruments generally remained high for guitars that were increasingly poorly made. It is relatively easy to understand why the 20‑year period between approximately 1965 and 1985 was crucial to reshaping the global guitar making industry.

One particular Japanese guitar maker, Hoshino Gakki Gen, saw an ideal opportunity to enter the fragile American market. Cleverly, Hoshino recognised the potential animosity towards Japanese‑sounding products after WWII and adopted the Ibanez moniker. Incidentally, the Ibanez name was derived from Spanish guitar maker Salvador Ibáñez, who made classical guitars and sold them to Japan from the 1920s. When Ibáñez, failed during the Spanish Civil War (La Guerra 1936-1939), Hoshino acquired the rights to use the name, dropping the accents in the process. Hoshino’s next step was to take over an American company, Elger, which had already been importing Japanese guitars into the U.S. This move gave them ready access to the American territory, initially as Hoshino USA and then Ibanez USA. From 1970, Ibanez began systematically targeting and imitating popular American guitar models, particularly from Gibson, Fender, and Rickenbacker.

Initially, Fender and Gibson chose not to challenge these foreign copies unless they were identical to the originals, i.e. deliberate forgeries. Perhaps they didn’t see the early copies arriving in relatively small numbers as a significant threat and therefore not worth the lengthy and expensive battles through the American court system with no guarantee of success. Perhaps naively, they may have seen the copies as providing entry‑level experience that would lead consumers to trade up and purchase the ‘real thing’. Nobody really knows for sure. However, by taking their eye off the proverbial ball, the already struggling American brands were storing up a hornet’s nest of latent problems.

The relatively cheaply made Japanese copies often used bolt‑on necks, cheap materials and inferior hardware. Having said that, they were often reasonably well made for what they cost the consumer. The slavish copies appealed to many novice guitarists wishing to have guitars that, at least visually, looked like the more expensive American counterparts without the accompanying high price tags. Notably, and perhaps pertinently, Fender’s own low cost ‘student’ guitar lines (the Mustang ‘family’) and Gibson’s budget models (the Melody Maker) didn’t resemble their upmarket pro‑level instruments, further exacerbating the weaknesses in the eyes of customers.

The Japanese picture at the time is typically complex and confusing, particularly when trying to differentiate the production companies from the brands they made and the importers they used. Some of the companies such as Tokai, Greco, Yamaha and Suzuki followed Ibanez’s lead and jumped on the cloning bandwagon, making relatively faithful copies of American guitars.

The huge Kawai Teisco company was a mass producer that made guitars under many names, including Apollo, Domino, Kent, Randall, Sterling, Victoria and Winston. One brand, Antoria was actually a German company (Framus) that imported Japanese Guyatone (Suzuki) guitars that included replica Stratocaster copies. Others, such as British firm CSL (Charles Summerfield Limited) originally rebranded imported Ibanez guitars. Columbus was another brand that simply imported Japanese‑made guitars under its own name. Hondo was an American company that imported Japanese copies, giving them some home‑grown legitimacy. The Spanish‑sounding Fernandes, on the other hand, was a wholly owned Japanese company that also used the name Burny. Many companies made guitars for other companies, so the picture is further obscured. There were many, many Japanese manufacturers that were largely unknown outside the country but were indirectly contributory to the assault on America and Europe in the 1960s and 1970s, including Fujigen Gakki, the aforementioned Hoshino Gakki Gen (who also used the Tama brand), Matsumoku, Moridara and Tombo.

So… just what were all these Japanese companies actually targeting? In particular, Gibson’s Les Paul and SG models, as well as Fender’s Telecaster and Stratocaster came in for ubiquitous copying. Popular Martin, Guild and Gibson acoustics also came in for replication, as they were the world’s most recognisable acoustic instruments at the time. Acoustic copies including names like Takamine, Morris, Pro Martin and Ventura. Even the fonts used for headstock logos often mimicked the original American brand styles.

As volumes increased, the wave of imports understandably caused problems for the original manufacturers and it was only a matter of time before there was a defensive response. That reaction was based largely on Gibson’s famous Les Paul and particularly the outline shape of the headstock.

In June 1977, Gibson’s owners at the time, Norlin, filed a legal case against Ibanez/Hoshino for copying the Gibson ‘open book’ headstock outline. The case was settled out of court by February 1978, by which time Ibanez had already changed their headstock shape. However, since 1974, Ibanez had been astute enough to foresee the complication and had been developing and improving its own unique Artist guitar designs, thereby circumventing any further rights issues. From 1978, once the lawsuit was behind them, Ibanez focused purely on its own designs.

Despite appearances, there was, in fact, only one landmark lawsuit at the time and it only related to the design of the headstock on Gibson guitars. Presumably, other American manufacturers were watching and waiting for the outcome of the Gibson case. Not looking for potentially damaging confrontation in the courts, other Japanese companies sought to avoid the wrath of the American companies and changed their designs just enough so as not to fall foul of further litigation.

Ironically, some of the Japanese ‘lawsuit’ guitars have since become collectable in their own right. Although many copies that claim to be subject to the lawsuit aren’t, they are just guitars made during the ‘lawsuit era’ of the late 1970s. Generally speaking, Japanese guitar making – having made its mark for better or worse – went on to plough their own furrow in the multinational market, establishing a successful business model on which they could build.

The imitation game hasn’t gone away completely though. Many ‘knock off’ guitars in the 21st Century are emanating from China, where there is little effective means of legal challenge. While some of the guitars originating from China replicate American designs and are produced in large volumes, some of the fakes are appearing in small quantities as very convincing forgeries of rare and valuable vintage instruments.

Also, somewhat ironically, the big American brands struck back by strategically shifting manufacture of lower cost instruments off‑shore. Fender made guitars in Japan from 1982, only later changing the name to Squier to differentiate them from the American originals. Similarly, Gibson started Far Eastern manufacture of Epiphone guitars in Japan in the early 1970s, then in Korea from 1983, before relocating production again in 2003 to a dedicated Epiphone factory in Qingdao, China.

In 1984, PRS guitars was established by luthier Paul Reed Smith and has since become one of America’s major guitar manufacturers. To cater for all price points, PRS also introduced Korean production facilities for its SE‑branded guitars in 2003. While on the subject of lawsuits, after PRS had released the PRS Singlecut in 2001, Gibson filed a trademark infringement claim against PRS for allegedly copying the Les Paul design. Gibson’s lawsuit failed at appeal and PRS resumed production of the Singlecut, albeit slightly altered, from September 2005.

Fender now actively defends its trademarks, which exist in perpetuity, unlike patents that have a limited duration. To illustrate the issues, Fender’s defence of its trademark headstock design reads as follows, “The headstock is the key source-identifying feature of the modern electric guitar. In particular, the shape of the headstock (which, in the types of guitars at issue here, is part of a single piece of wood that also includes the guitar neck) is nonfunctional and primarily serves to identify the brand and model of the guitar. Fender owns trademark rights and federal registrations for the shapes of its headstock designs. These marks are instantly recognizable to generations of musicians and music fans as indicators of the source of Fender’s products and of the immense history and goodwill associated with Fender.”

Furthermore, Fender lost a 2009 application to trademark its guitar designs retrospectively. Opponents stated that consumers had had decades of unopposed exposure to those shapes from a wide variety of other guitar makers. This particular ruling opened the door to many look‑alike guitars, bar the familiar and distinctive headstock shapes.

Rickenbacker, unlike many of its counterparts, trademarks its important designs and vigorously protects them through the courts, hence why there are generally fewer Rickenbacker copies on the market compared to Fender and Gibson clones.

The whole issue of who owns what and how owners’ rights can be protected in a global market rife with replicas is a hugely complex issue and the nuanced legal debates are not for this story, so it is time to close this particular case and move on.

The Fallout and Time for Objective Re-assessment?

The Gibson law suit was, however, a wakeup call for American guitar building, as it proved beyond doubt that they were vulnerable to competition. While it may seem a relatively small isolated incident, it was contributory to the way in which guitar making, distribution and sales had to change. It was time for a shake‑out. By getting back to the basics, the rebuilding of American production that took place from the mid‑1980s resulted in vastly improved fortunes, even though it would take years for several companies to return to prosperity. Gibson and Fender were back in private ownership, Rickenbacker had sustained its business and, although Danelectro and Gretsch would find success, it took some time to regenerate historic popularity.

Despite what naysayers, respected journalists and wealthy vintage guitar collectors will delight in telling anyone who will listen, not all guitars built between 1965 and 1987 (when Fender introduced the landmark American Standards) are bad. Yes, there are many examples of poor quality instruments produced during those ‘dark ages’ but, let’s be honest, that has always been the case. Just look at some of the cheap and nasty instruments from the 1950s and early 1960s produced during the ‘golden era’.

Being a bit provocative and controversial, it is the author’s considered belief that there were many very good instruments built in the 1970s but these tend to be overlooked and caught up in the sweeping generalisation that ALL instruments from that period are sub‑standard. Some unique and interesting models only appeared during the 1970s and 1980s as part of the drive for experimentation. Some of these experiments were often made for relatively brief periods before they disappeared again. As a result, many of these rare examples are highly likely to be of interest to collectors in the future. As vintage prices of 1950s and 1960s guitars are rapidly increasing beyond many enthusiasts’ ability to purchase them, 1970s and 1980s guitars are also creeping up in value and are likely to become the ‘next big thing’ in the vintage marketplace. When they do eventually become desirable, which they will, that critical labelling of ‘poor quality’ is likely to be conveniently forgotten as the wheat is separated from the chaff.

Generally speaking, with the introduction of automated and computer controlled construction technologies, instruments from c.1990 onwards are generally consistently well‑made. This means that poor quality instruments are fewer and further between. Value‑for‑money since the 1990s has never been better with some very good guitars available at relatively low prices compared to the past. Broadly categorising the ensuing years between, say, 1990 and 2000 as a period of rejuvenation, resurgence and consolidation in the face of significant and multifarious challenges including economic downturn. The dawn of the new millennium saw further change including diversification, growth and a degree of reconfiguration. The reality, perhaps obviously, isn’t simply a case of general classification though, so such broad descriptions may best be regarded as a bit of artistic licence on the author’s part.

It may seem strange but it was often the inherent manufacturing variations and inconsistencies that have led to the handmade ‘golden era’ guitars becoming so desirable in the first place. As the idiosyncratic traits of the past have been ironed out, consumers have had ready access to consistent, reliable and higher quality guitars at virtually all price points. However, the increase in standardisation means that many modern mass‑produced guitars are often described as ‘generic’, samey and bland. It is also that lack of variation that has led to the boom in boutique, custom and modded guitars in the 21st Century.

Only time will really tell whether some of these maligned 1970s guitars will be re‑evaluated and achieve better recognition. Good examples will undoubtedly become increasingly sought after and collectable.

Recovery and Rejuvenation

Musical tastes continued to change and the 1980s and 1990s were no different. One trend was a move away from guitar music to highly produced electronic keyboard music. Japanese giant Roland (owner of BOSS effect pedals) tried to popularise the guitar synthesizers on the back of the electronica trend, as did consumer electronics company Casio who were more famous for calculators rather than guitars.

Another trend in musical taste was the explosion in popularity of glam, hard and ‘shred’ rock. Ironically, it was companies like Ibanez, once the scourge of copy guitars, which was ideally placed to cater for the trend with some cleverly designed genre‑appropriate instruments, such as their Destroyer, Iceman and Jem guitars.

Ibanez had cleverly repositioned themselves and continued to do so in order to sustain competitive advantage. In another canny move, Ibanez courted the new breed of virtuoso instrumental rock musicians, which proved successful. American guitarists such as Steve Vai and Joe Satriani were regularly seen using and advertising the Ibanez brand. Other Japanese companies followed suit, such as Yamaha and ESP/LTD. American brands such as Dean, Jackson and BC Rich also exploited the growing market for pointy rock alternatives to the old‑hat rock shapes such as Gibson’s Explorer and Flying V. Times had moved on and the traditional industry stalwarts were once again looking tired, on the back foot and at a strategic disadvantage.

By the time that some sort of equilibrium was restored from the late 1990s, the music and guitar landscape was very different from the end of the ‘golden era’. There was room for big music companies to grow, such as Peavey and Ernie Ball, the latter having bought out Leo Fender’s Music Man in 1984. The ‘big four’ brands were still there – Fender, Gibson, Rickenbacker and Gretsch, who continued to expand their ranges into high‑value custom shop as well as low‑priced models. In addition, once the barriers to entry were lowered, there were many small, opportunistic companies that sought to grow market share on their own terms, such as PRS. There was also a whole thriving boutique sub‑industry that focused heavily on producing custom instruments built to individual guitarists’ requirements; a healthy trend that continues to flourish well into the 21st Century.

The 2000s saw a reversal of fortunes with synth‑based dance and pop music becoming clichéd and well‑worn. This change of fortune facilitated a major resurgence in guitar music across a whole range of musical genres but specifically the burgeoning indie/alternative music scene. Indie music also triggered a renewed interest in retro‑styled instruments often evoking quirky designs from the past. This revitalisation enabled many gone but not forgotten guitars to experience a new lease of life. In addition, metal, progressive/contemporary, alt‑country and blues/rock genres have also seen rejuvenation and/or revivals, together with relevant instruments to suit. Even the likes of Fender, Gibson, Gretsch, Danelectro and Rickenbacker have benefitted through reissues of previously defunct models. All in all, many guitar‑based musical styles continue to flourish and guitar sales benefit from the 21st Century appetite for diversity.

Interestingly, in the 2000s and 2010s, with the renewed interest in both retro and vintage designs, many of the old American brand names that went out of business in the 1960s have since re‑emerged, including Supro, Valco, Airline, Harmony and Kay.

The global recession that started in 2008 has been the longest and deepest since the 1930s severely dampened demand for discretionary purchases such as musical instruments. However, the desire to own and play the world’s favourite instrument endures, despite regular proclamations of the ‘death of guitar music’.

Music Trades data shows that total guitar sales in America, either by number or value, have shown a general increasing trend per year since 2009:
Year    Number  Value
2009    1.65m     $924m
2010    1.74m     $922m
2011    1.94m     $921m
2012    2.34m     $903m
2013    2.34m     $821m
2014    2.50m     $839m
2015    2.49m     $935m
2016    2.47m     $1,001m
2017    2.63m     $1,070m

In comparison, the number of electric guitar sales in America has remained largely steady since the start of the recession. Where these figures will go in the future and whether sales will regain pre-crash levels anytime soon is a betting man’s game. The market is, judging by these indicators, likely to stay challenging for some time to come.

One very positive trend is that research by Fender in 2018 shows that 50% of new guitarists in the U.S. and the UK are females, suggesting that equality is finally making progress in the music industry.

Modern‑day guitarists have learned to become fickle and much more discerning. No longer could a few privileged brands expect musicians to be loyal or for their products to be accepted as the default ‘go‑to’ solution. While slower to adapt, the American ‘big four’ fought back and, although often constrained by their past, were forced to innovate and compete or die. Not all of those experiments have been successful but the point is that they are trying to adjust to the inevitability of the brave new world.

Looking at the bigger picture, the diverse structure of the guitar industry is healthy for both producers and consumers. While things will change again, the fragmented nature of the marketplace in the 2010s means that risks of major step change are reduced. For the long‑established brands, the asset value of the ‘classics’ is now cemented and, to some extent, can once again be relied upon in terms of quality and value. The reliance on industry standards also creates a problem for the likes of Fender, Gibson, Gretsch and Rickenbacker, as it inhibits what they can do in a way that consumers will accept, witness Gibson’s failed attempt to move into consumer and lifestyle electronics.

Ultimately, nothing is set in stone and there is very little that can be considered genuinely ‘new’. The only certainty is that change will be continuous and necessarily incremental. Digital music technology will continue to be both a threat to, and an opportunity for, manufacturers. The hybridisation of analogue instruments and digital technologies is still in its infancy and only time will tell, which companies will respond positively and which will fail to adapt and fall by the wayside (again).

That brings us pretty much up to the current day, at the time of writing (2018). As English punk rock pioneer Joe Strummer of The Clash once said, “The future is unwritten” and how true that is. We are nearing the end point of the guitar’s long story… except that the story will continue in perpetuity. All that is really left to do is to describe the current position (again at the time of writing) and to speculate, somewhat idly, about what that unwritten future may hold.

End of Part VII

Here we are at the end of yet another episode in the guitar’s extended tale. We are pretty much up‑to‑date and therefore almost at the end of the journey, with (I think) just one more article to go. I hope that you’ll join me, hopefully next month for the conclusion… as far as there can be one.

I am now beginning to deliberate about a companion series of articles for next year (2019). Before that happens, I need a rest from this massively resource intensive exercise. I can’t yet reveal what that new series is, as I am thinking about things I haven’t thought of yet (if you get my drift). I will have to consider how it might be done in a way that I haven’t seen elsewhere up to now – I need to bring something new to the subject matter, otherwise it is just regurgitating what others have already done. Watch this space… In the meantime, I have to start planning what I’m going to fixate upon for the remainder of this year.

Right now though, it’s time to stop writing about guitars and to start playing one of the darned things, so I’m off to plink my plank! Until next time…

CRAVE Guitars ‘Quote of the Month’: “Whatever was pre-modernism like?”

© 2018 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?
31 Aug 2018

August 2018 – A Potted History of the Guitar Part VI

by | posted in: History, Introduction, Observations | 0

Hello again, guitar history fans and welcome to August 2018’s article in the series on the history of the guitar. There is no point in beating about the bush, it’s time to dive right back in where we left off last month with the birth, and now – to extend the analogy – the growth of the electric guitar from early years to adolescent hood.

If you wish to recap on previous articles before starting here, the ‘Potted History of the Guitar’ series, can be accessed here (each part opens in a new browser tab):

The Modern Solid Body Electric Guitar

This part of the guitar’s story covers the period of fundamental and rapid innovation as well as pragmatic entrepreneurialism that starts around the late 1940s and early 1950s, a period of intense creativity that would come to define the modern electric guitar. Once the essential foundations were laid by Rickenbacker, Gibson and a few others, the popularity of the guitar was about to explode.

Since the time of the guitar ‘big bang’, instruments would continue to be improved and refined; an incremental process that continues unabated up to the current day. However, nothing like the level of creativity that heralded the ‘dawn’ of the electric guitar era. It was the start of a so‑called ‘golden era’ that would last about 15 years.

While acoustic guitars continued to develop after the 1930s, they were just about as loud as they were going to get without some form of amplification. Electric archtop and early solid body electric guitars had started the ball rolling during the first half of the 1930s and guitarists were buying into the increasing trend for electric guitars of one sort or another.

While not alone in influencing guitar development, today’s ‘big two’ companies – Fender and Gibson – have between them, been responsible for, or at last instrumental (sic!) in, many of the major innovations and landmark electric guitars since the 1950s. Therefore, the focus here is predominantly, but not exclusively, on the contribution from these two major manufacturers.  Much credit though is due to the vast number of other guitar builders – way too many to mention them all by name – that have played their part in developing the musical landscape over the decades, and which we enjoy today. Without their competition to keep the ‘big two’ on their toes, the quality and price equation might have gone too far in opposite directions. Thankfully, there is no monopoly in the guitar market – far from it in fact – and that fact, as it turns out, is a very good thing for musicians all over the world.

However, before the story moves on to Fender and then Gibson, we need to take a short diversion before getting back on track…

Bigsby Guitars

No history of the formation of the electric guitar would be complete without some mention of Paul Adelburt Bigsby (1899-1968). P.A. Bigsby was a motorcycle racer, inventor, designer and builder based in California. Bigsby has often been quoted as saying confidently, “I can build anything”.

Historically, Bigsby might be better known for his iconic Bigsby vibrato systems. Less well known is that Bigsby was also responsible for pioneering solid body electric guitars as well as for revolutionising pedal steel guitars.

Bigsby collaborated with lap steel guitarist Earl ‘Joaquin’ Murphey (1923-1999) of Spade Cooley’s orchestra in the 1940s. Murphey helped to persuade Bigsby to start making guitars in the first place, in around 1946/1947. Bigsby built Murphey several steel guitars by 1947, with two or three necks. Murphey’s successor in Cooley’s band, another steel guitarist called Speedy West (1924-2003), not wishing to be outdone, also commissioned Bigsby to build him a custom pedal steel guitar in 1948.

Around the same time, successful country and western artist and good friend, Merle Travis (1917-1983) asked Bigsby to fix a wayward vibrato on his Gibson L-10 guitar. Bigsby subsequently went on to build a complete solid body electric guitar for Travis, based on a sketch Travis had made. Travis’s Bigsby guitar attracted a lot of attention and other artists queued up for Bigsby to make further custom guitars, including for acclaimed session guitarist with the ‘Nashville A-Team’, Grady Martin (1921‑2001).

Bigsby’s guitar designs not only seem familiar, but also seem well ahead of their time for 1948, especially when compared to anything else on the market. The Bigsby Merle Travis guitar has a single cutaway body not dissimilar to Gibson’s Les Paul models and a neck/headstock outline that bears a notable resemblance to Fender’s Stratocaster. Bigsby’s design predated both the Les Paul (1952) and the Stratocaster (1954) by several years. Many have contended that Gibson and Fender plagiarised, rather than simply being influenced by, Bigsby’s original designs. Hindsight provides the opportunity to speculate but the truth is shrouded in idle debate and misinformation.

Partly because he wanted to make most of the parts himself, Bigsby only produced a very small number of finished custom‑built instruments up until 1956, where after he concentrated on the vibrato business. However, as his guitars never entered full production, his legacy consists of a few unique examples of his craftsmanship. Unfortunately, Bigsby kept no records of his creations. The company he founded undertook extensive research and can document 47 steel guitars and only 6 standard guitars, along with a few other custom instruments surviving to the current day. Others may yet come to light at some point to be authenticated.

Bigsby’s name is now synonymous with his ubiquitous vibrato tailpieces, which have adorned countless guitars since the 1950s. Bigsby sensibly filed a patent for his ‘tailpiece vibrato’ in November 1952, which was granted by the U.S. Patent Office in March 1953. The rest, as ‘they’ say, is history.

When his health started to fail, Bigsby sold his company to retired Gibson president Ted McCarty in 1966. Paul Bigsby died 2 years later in 1968 at the age of 68. Subsequently, Gretsch bought the Bigsby enterprise from McCarty in 1999. Bigsby Guitars is now making limited edition guitars under the patronage of Gretsch.

Many of those aware of Bigsby’s pioneering work feel that he should be given greater credit for his contribution to guitar history. One might only wonder at the course of modern guitar history had Bigsby capitalised on his creative designs. Bigsby may have been first in a lot of areas but it was other companies that catered for the market and it is the commercial success brought about by mass production which is where the story then continues.

Fender Solid Body Electric Guitars

Clarence Leonidas ‘Leo’ Fender (1909-1991) was an electrical engineer by trade. He started out in business as Fender Radio Service in 1938, repairing radios, phonographs and valve amplifiers. Recognising the growing demand for his skills from the music industry, Fender looked to use his growing expertise in that area. Along with business partner and former Rickenbacker employee Clayton ‘Doc’ Kauffman, Fender co‑founded the short‑lived K&F Manufacturing Corp in 1945. K&F’s intention was to manufacture musical instruments and amplifiers, including lap steel guitars that were particularly popular at the time.

By 1946, Fender had parted ways with Kauffman and established the Fender Electric Instrument Manufacturing Company, based in Fullerton, California. The company, known to most simply as Fender, has become one of the pre‑eminent and most widely recognised manufacturers of electric guitars, basses and amplifiers in the world. Historically, Fender is particularly important because of its ground breaking role in making electric instruments and amps accessible to mass markets eager for the new‑fangled technology in the 1950s.

Leo Fender’s vision had less to do with building small numbers of bespoke instruments and more to do with commercial large‑scale manufacture of instruments using tried and tested production methods. Fender wanted the electric guitar to be straightforward to manufacture as well as easy to service and maintain. Leo Fender asked George William Fullerton (1923-2009) to join the company in 1948. Fullerton’s appointment was important, as he would become a long‑term business associate not only at Fender but also in subsequent post‑Fender enterprises, including Music Man and G&L (an acronym standing for George & Leo).

Even though Fender had introduced amplifiers in 1947, Fender’s business began focusing on guitar designs and in c.1949 the company started making prototypes of what would eventually become the iconic Telecaster. The early prototypes used a body largely designed by George Fullerton. The first prototype exhibited a 3‑a‑side lap steel‑style headstock, while the second attempt looked more Fender‑like. Both prototype headstock designs bore a similarity to those seen on Bigsby’s guitars.

Fender offered the first mass-produced Spanish-style solid-body electric guitar to the public in 1950. The initial few guitars were single pickup models called the Esquire, although confusingly, a small number of Esquires were also ordered with two pickups.

The production dual pickup model was originally named the Broadcaster until Gretsch objected to the use of the name, as they had produced drums using the Broadkaster name since the 1920s. Fender complied and for a short period between February and August of 1951, the guitar appeared with no name on the headstock, leading to the popular nickname ‘Nocaster’ to describe its curious temporary anonymity.

Fender filed a patent for the Telecaster design in April 1951, which was awarded quite quickly by the U.S. Patent Office in August 1951. The familiar twin pickup single cutaway guitar, now formally named the Telecaster was made available to the public from mid‑1951 and has, remarkably, remained in continuous production ever since.

Although instantly recognisable nowadays, the Telecaster was unlike anything that had come before. The way they were put together was revolutionary; using a modular construction comprising a single cutaway slab body of solid ash wood and a removable maple neck secured by four screws on the back of the body. The simple and sturdy design proved not only resilient but also efficient and relatively cheap to manufacture using established assembly line techniques of the time.

While there have been many variants of the Telecaster over the years, including the Custom, Deluxe, Thinline and Elite, the original fundamental design elements have remained largely unchanged over many decades.

Not content with the success of the Telecaster, Fender and this team went on to design and market the enormously popular Stratocaster in 1954. Unlike the Telecaster, the Stratocaster employed a futuristic double cutaway ash body with deep rib and forearm contours for player comfort, 3 single coil pickups and a clever floating vibrato system. Fender retained the bolt‑on maple neck, albeit with a shapelier headstock than the Telecaster and eerily reminiscent of Bigsby’s earlier design. Fender filed a patent application for the Stratocaster’s ‘tremolo’ (a misnomer – it is actually a vibrato) design in August 1954, which was subsequently awarded in April 1956. The Stratocaster, like the Telecaster before it, became phenomenally successful with consumers and has been in continuous production since its launch.

Just as revolutionary for bass players, Fender also pioneered the commercially successful electric solid-body bass guitar. The Precision bass first appeared shortly after the Telecaster in 1952 and before the Stratocaster. Before the Precision, bass players had to contend with cumbersome acoustic, hollow body, fretless upright basses. The Precision was an ergonomic godsend, especially for travelling musicians. Like a guitar, the Precision featured a fretted neck making the instrument much more accessible to neophytes wanting to jump on the bandwagon of popular electric guitar music in the 1950s and 1960s. The 34”‑scale fretted neck gave practical credence to the new bass’s name – Precision. Fender filed a patent for the bass guitar in November 1952, which was awarded in March 1953.

Initially, the Precision took many design cues from the Telecaster before updates in 1954 and 1957 gave it the now‑familiar characteristics more akin to the Stratocaster. Not resting on their laurels, Fender followed up the hugely successful Precision with the twin‑pickup offset Jazz bass in 1960.

These four models – Telecaster, Stratocaster, Precision and Jazz – represented the enduring ‘core’ models around which Fender experimented with other designs. It is very unusual in industrial design history to ‘get it right’ first time and then for those products to remain relevant for over six decades (… so far, and counting). However, Fender seemed to have achieved just that. Fender, however, not content to stand still, kept innovating.

In the late 1950s and early 1960s, Fender also introduced two luxury contoured offset‑waist body models; the 25½”‑scale Jazzmaster in 1958 and the shorter 24”‑scale Jaguar in 1962. Both models used entirely new single coil pickups and both had separate, complex ‘rhythm’ and ‘lead’ circuits. The controls were not intuitive, which put off some players. The high‑price of the Jazzmaster and Jaguar may also have deterred customers and both models failed to attract the intended target audience – traditional jazz guitarists wedded to the competition’s archtop designs. However, both the Jazzmaster and Jaguar gained a significant boost from an unexpected source. Popular west coasts surf musicians including The Beach Boys and The Ventures adopted the new offsets and gave them some legitimacy. Ultimately though, poor sales led to Fender discontinuing the Jaguar in 1975 and the Jazzmaster in 1980. Wisely, Fender has subsequently successfully reissued both models for newer generations to discover.

One of the key success factors for Fender was the introduction of custom colour options in addition to the limited standard blonde and sunburst finishes. Custom colours were based on popular automobile paints made by DuPont during the American car craze of the 1950s. Customers could custom order new guitars from a range of exciting colour finishes for an additional 5% upcharge. Fender was also open to accepting standard colour guitars for factory refinishing in the custom colours. Popular names for the custom colours included Olympic White, Lake Placid Blue, Daphne Blue, Sonic Blue, Shoreline Gold, Burgundy Mist, Sherwood Green, Surf Green, Foam Green, Fiesta Red, Dakota Red, Candy Apple Red, and Shell Pink. Early models with genuine custom colours are relatively rare and have since become highly desirable with vintage guitar collectors; some guitars fetching a hefty premium on the vintage market compared to the standard colours. Many of those original custom colours phased out by 1969 to 1972 have now become very popular again as standard colours in the 21st Century.

Strategically, Fender tried to cover all bases by also introducing a range of short-scale (initially 22½” and then 24”) ‘student’ models including the Musicmaster (1956), Duo‑Sonic (1964), Mustang (1964) and Bronco (1967). To differentiate the ‘student’ instruments from the pro‑level models, Fender designed hardware and finishes that was unique to these models. The Musicmaster and Bronco had single pickups, while the Duo‑Sonic and Mustang had two pickups. The Mustang and Bronco also featured bespoke vibrato systems while the Musicmaster and Duo‑Sonic had fixed bridges. While these budget models have found a strong following by those in the know, they have had chequered histories, all having been discontinued and reissued over the years. Seen as peripheral to the ‘core’ classics, the high volume low cost guitars undeservedly attract a lower profile and lower resale values on the vintage collector market despite being made at the same factory, by the same staff, using the same materials and tools.

In the minds of most guitarists, Fender was a solid‑body guitar maker. After the failure of the Jazzmaster and Jaguar to persuade traditionalists to change brand, Fender attempted to compete with Gibson’s popular ES range of semi‑acoustic guitars. Fender introduced the fully hollow‑body Coronado in 1966, designed by German luthier and Rickenbacker guitar designer Roger Rossmeisl. The Coronado retained Fender’s ‘bolt‑on’ maple necks with six‑a‑side headstocks, although the pickups used were unusually DeArmond single coil models. Unfortunately for Fender, the ill‑fated Coronado proved a commercial failure and was discontinued in 1972. After a short‑lived venture into archtop jazz guitars with the rare Montego and LTD models between 1968 and 1972, Fender tried again in1976 with the introduction of the upmarket semi‑hollow humbucker‑equipped Starcaster. Like the valiant attempts before it, the Starcaster met with the same consumer resistance and proved equally unsuccessful, resulting in it being summarily discontinued in 1982. Notably, both the Coronado and Starcaster models were reissued by Fender in 2013 and continue in production today.

There have been many other Fender solid body electric guitars over the years including the Bass V & VI, the Electric XII, Bullet and Lead amongst numerous others.  In addition, there were many variations on a theme, for instance the Coronado came in Antigua, Wildwood, XII and bass versions. Similarly, the Musicmaster and Mustang also had short‑scale bass models. Other examples include parts‑bin oddities like the Swinger and Maverick. Many later experiments were undertaken by the Japanese arm of Fender without any risk to the company’s ‘Made in USA’ standing. Japanese‑only models include the Performer, Katana and the Gibson‑like set neck Flame. Many of these low volume under‑the‑radar guitar models are often described as ‘forgotten Fenders’.

As covered in Part IV of the story, Fender has also sustained a very successful line of guitar and bass amplifiers dating from the late 1940s right through to the current day, including landmark valve amps such as the Princeton, Champ, Bassman and the mighty Twin Reverb (among many others). Like Marshall and Vox from the UK, Fender amps have become synonymous with modern electric guitar music.

The successful honeymoon period for Fender was, however, not destined to last forever. In early 1965, Leo Fender sold his company to the Columbia Broadcasting System (CBS), reportedly for $13m. Despite investment and efforts to diversify the product lines, manufacturing quality varied considerably due to poor management and cost cutting, particularly during the 1970s. Industry reputation and credibility waned and Fender sales suffered significantly, especially in the face of aggressive competition from Japan. One of the strategies adopted by Japanese companies at the time was, despite the existence of U.S. patents, to flagrantly copy American guitar designs. Japanese companies produced large numbers of guitars built to high standards and sold at low prices. This shameless targeting of American products placed an already struggling Fender under considerable pressure. By 1981, Fender had brought in Dan Smith from Yamaha as Marketing Director to oversee selective guitar redesigns and, along with Fender luthier (and founder of the Fender Custom Shop) John Page, to breathe new life into Fender’s fortunes.

After making considerable improvements across the business, 20 years after being sold to CBS, a management buyout was initiated by CEO William Schultz (1926‑2006). In retrospect, Schultz is now widely regarded as ‘the man who saved Fender’. Fender Electric Instrument Manufacturing Company was acquired from CBS by its own employees in 1985 and the newly privatised company was renamed Fender Musical Instruments Corporation (FMIC). The sale did not, however, include the existing Fullerton factory, so Fender was forced to construct a new plant at Corona, California which started limited manufacturing in late 1985.

After two years of restructuring the business, the post‑CBS Fender American Standard Stratocaster was introduced in 1987. While superficially similar to previous models, the American Standard was a significant model that signified the company’s return to form and commercial prosperity. In the same year (1987), Fender set up their in‑house Custom Shop (nicknamed ‘The Dream Factory’), based at their Corona facility in California. The aim of the Custom Shop was to showcase just what Fender’s master luthiers were capable of building.

Fender’s headquarters are now based in Scottsdale, Arizona, with North American manufacturing facilities in Corona, California, and Ensenada in Mexico. Off-shore production of budget Squier guitars and basses is based in Korea and Japan. Fender has continued to innovate, introducing ‘custom shop’, ‘vintage reissue’ and ‘relic’ instruments and a range of electronics to a market hungry to recapture the ‘golden years’ of pre‑CBS Fender instruments and amps.

We have become so familiar with the Fender Telecaster, Stratocaster and Precision, that we sometimes forget just how revolutionary these designs actually were back in the 1950s and what they, perhaps unwittingly, came to represent. Looking a little more broadly helps to put things into context. Loud and brash electric guitars undoubtedly helped to define the musical uprising brought about by the advent of rock ‘n’ roll. At the same time, a western social and cultural transformation was taking place in the wake of post‑WWII austerity and despite prevailing conservative Cold War political paranoia. Affluent and often puritanical middle class values allied to consumers’ relentless drive to satisfy materialistic aspiration were fuelled by media, film and television. Opposing the status quo was a growing urban resentment, an angry youthful rebellion boosted by emerging anti‑conformist liberalism and radical demands for greater personal freedoms. Fundamental change was, arguably, inevitable. The turmoil created in the 1950s began to reshape the fabric of society in both the U.S. and the UK and this, in turn, propelled musical experimentation and creativity at a pace never seen before. Fender’s electric guitars not only enabled that particular wave to be ridden with verve, passion and a certain degree of teenage angst, but also came to symbolise many defining events for a frustrated generation, a subversive movement that would last well into the 1960s. When Marlon Brando was asked the question in the film ‘The Wild One’ (1953), “Hey Johnny, what are you rebelling against?” he retorted disinterestedly “whadda you got?” For a while at least, it was hip to be cool and cool to be hip.

If there are any guitars that qualify for the terms ‘iconic’, ‘classic’ and ‘industry standard’, these original Fender models have to be up there with the best and most enduring industrial design wonders of all time. In particular, the timeless design of the ‘Tele’ and the ‘Strat’ have persisted in the minds of guitarists over many decades, and will surely continue to do so for the foreseeable future.

Those ‘new’ guitars back in the 1950s are now hugely valuable vintage instruments and are part of our collective music heritage. Vintage Fender guitars, basses and amplifiers are much sought after by collectors, musicians, dealers and enthusiasts alike, with many key models originally made prior to the CBS takeover in 1965 now reaching high vintage guitar market values. Authentic vintage instruments associated with successful artists (and with documented provenance) attract an even higher price premium on the collectable market, for instance, Eric Clapton’s famous c.1956 ‘Blackie’, which was sold for $959,500 to Guitar Center at Christie’s in New York in 2005.

Gibson Solid Body Electric Guitars

The history of Gibson guitars is much longer than that of its main current‑day rival Fender and much of this has already been covered elsewhere. The crucial part that Gibson played in this stage of guitar evolution is picked up again here in the mid‑20th Century.

During the 1940s, popular American jazz guitarist, performer and musical inventor Les Paul (1915-2009) – born Lester William Polsfuss – had become increasingly unhappy with the compromises experienced by electric acoustic archtop guitars. In an attempt to overcome the shortcomings, Les Paul had been actively experimenting with guitar design from around 1939. A famous early prototype electric guitar assembled by Les Paul out of hours at the Epiphone factory around 1940 was nicknamed ‘the log’, which was essentially a solid piece of 4”x4” pine timber running the length of the body, providing the base for the strings, bridge assembly and pickups. To make the design appear more guitar‑like, Les Paul attached a traditional guitar neck and two hollow guitar ‘wings’ from an Epiphone archtop on either side of the ‘plank’.

Les Paul had originally approached Gibson as early as 1941 but no interest was shown by the company.  He tried again in 1945 or 1946 and his ideas were once again rejected. It wasn’t until 1950 that newly‑appointed Gibson president, Theodore ‘Ted’ McCarty (1909-2001) brought in Les Paul to act as a consultant in response to Fender’s newly launched solid body electric guitars. Like Leo Fender, McCarty could not play the guitar, so he worked very closely with those who could.

In 1951, Gibson began producing prototypes of a solid body electric guitar designed by McCarty in consultation with Les Paul. One of the many prototype designs (shown following restoration below) is relatively close to the final production in all but detail.

Gibson was already losing ground, and business, following the introduction of Fender solid body guitars that appealed to young musicians exploring new musical ideas. To many consumers, Gibson’s models were seen as staid and, compared to the modernistic Stratocaster, frankly old fashioned, tired and boring. For Gibson, it was important that any sold body electric guitar design would be all‑new while also remaining consistent with the values, quality and reputation of the company. It was also crucial that the new instrument would be quite different from Gibson’s competition, whether existing or emerging. Crucially, before the new guitar was launched, McCarty agreed a deal with Les Paul for it to carry Les Paul’s name on the headstock and for him to be an integral part of Gibson’s advertising campaign.

In July 1952, Gibson launched the now-iconic solid-bodied guitar, the Gibson Les Paul Model, finished in metallic gold, equipped with dual P90 pickups and a trapeze tailpiece similar to those found on the company’s archtop guitars. For a number of years, the Les Paul Model and its variants were the only solid body guitars made by Gibson. The range was extended from the basic ‘gold top’ to the upmarket black and gold Les Paul Custom in 1953 featuring a standard bridge, one P90 pickup and a unique Alnico V ‘staple’ pickup at the neck, a unique design intended to appeal to jazz guitarists.

To broaden appeal, Gibson introduced two affordable slab‑body single cutaway Les Paul models, the Junior with a single P90 pickup in 1954 and Special with dual‑P90 pickups in 1955. These rather utilitarian models retained the body outline but with few of the upmarket features of the carved‑top Les Pauls.

By 1957, the Les Paul’s P90 single coil pickups began to be replaced with Gibson’s PAF (Patent Applied For) humbucking pickup. The process started with the now‑iconic 3‑pickup Les Paul Custom ‘Black Beauty’.

1958 saw the Junior and Special updated to a new double cutaway body and the option of cherry or outrageous TV Yellow, a colour allegedly designed to show up well on black & white TV screens of the time.

Following poor sales of the original Les Paul ‘gold top’ model, the guitar was rejuvenated in 1958 by renaming it the Standard. The Standard’s specification was changed substantially – a cherry sunburst finish was applied to a maple‑capped mahogany body, the PAF pickups became the norm and a tune‑o‑matic bridge and ‘stop’ tailpiece were standardised. Some, but not all, of the tops exhibited an attractive matched 2‑piece ‘flame’ maple top. Around 1,700 of the now‑legendary ‘Burst’ Les Paul Standards were produced between 1958 and 1960 and all have become highly collectable on the vintage guitar market. The original sunburst Standards have become the aspiration of many guitar enthusiasts. These rare instruments are widely regarded as representing the epitome of Gibson guitar’s ‘golden age’.

The Les Paul models weren’t the only new instruments aiming to establish Gibson’s electric guitar credentials. The late 1950s saw a number of new guitar designs including the McCarty‑designed ES-335 semi‑acoustic, which first appeared in 1958. The ES‑335 was significant because of a solid centre block running through the body and on which the pickups and bridge were mounted, essentially much like Les Paul’s ‘log’ experiment. The semi‑hollow body construction was important in reducing acoustic feedback in high gain situations compared to fully‑hollow archtops. Gibson also released a lower cost hollow‑body ES model with dual P90s, called the ES-330 and two upmarket siblings, the ES‑345 and ES‑355.

The late 1950s was a period of intense innovation at Gibson. In addition to the Les Paul and the ES series, Gibson designed two ‘modernistic’ guitars intended to compete with Fender’s popular solid guitars, the Explorer and Flying V, both of which were introduced in 1958. A third ‘modernistic’ series model, the Moderne, was patented and prototypes might have been constructed but no actual verified examples have ever come to light, let alone reached the vintage collector market. The Moderne has become something of a myth and an original 1950s example is seen by many collectors as the ‘Holy Grail of guitar collecting’. Gibson (re‑)issued a Moderne in small numbers in the early 1980s and again occasionally since.

While the futuristic Flying V and Explorer models were well ahead their time, sales of these radical instruments was very poor. In 1958, Gibson sold only 81 Flying Vs and 19 Explorers. The following year (1959), only 17 Flying Vs and 3 Explorers were sold. It is hardly surprising then that both models were withdrawn by 1959-1960. A few further examples were constructed in the early 1960s from parts. As only small numbers of the original release Explorers and Flying Vs were made, they have become very highly sought after and valued. Gibson, however, would return to these original designs and has successfully reissued both the Flying V and Explorer many years later.

Like Fender, Gibson recognised that they had to cater for the lower end of the market in order to attract new and younger players to the fold. In order to make budget guitars accessible without affecting sales of their premium models, Gibson introduced a range of simple low cost ‘student’ guitars, called the Melody Maker, from 1959. The basic Melody Makers, featuring distinctive narrow headstocks, slab bodies and all‑new Fender‑like narrow single coil pickups, were produced in large numbers at Gibson’s Kalamazoo plant alongside the classics. The Melody Maker’s body shape went through four incarnations during its lifetime, with only 2 bearing a similarity to existing Gibson electrics. Although the Melody Makers proved very popular and sold in large numbers, they were nevertheless withdrawn by 1971. Gibson has re‑used the Melody Maker name on a number of occasions since the original models.

Despite the now‑legendary reputation of the Les Paul Standard, sales of the model remained relatively stagnant and, in 1961, Gibson were forced to take action. Effectively, production of the Les Paul ceased and a new design was introduced in 1961, even though it retained the ‘Les Paul’ moniker.  The new model was another design shift with a thin double cutaway mahogany body with contoured upper bouts and pointed ‘devil’ horns. Allegedly, Les Paul didn’t favour the guitar’s design and no longer wanted to be associated with it. In addition, Les Paul separated from his wife Mary Ford and the divorce settlement may also have been a pecuniary factor in his decision to drop his name from the guitar. By 1963, after Les Paul’s name was removed, the model was re‑designated the Gibson SG (standing for ‘Solid Guitar’). The Gibson SG has remained in continuous production since 1961 and, ironically, it has become the company’s most commercially successful model in Gibson’s long history. Like the single cutaway Les Paul before it, the SG model came in a number of variants, the single‑P90 Junior, the dual‑P90 Special, dual‑humbucker Standard and 3‑humbucker Custom.

The single cutaway Gibson Les Paul may have gone but it was not forgotten. It reappeared in 1968, and then only after second hand guitars became popular at around the time of the British blues explosion, led by guitarists such as Eric Clapton and Peter Green, as well as other contemporary musicians of the time, including Jeff Beck, Jimmy Page and Paul Kossoff. The Les Paul has had numerous variants over the years including notable models such as the Les Paul Deluxe, Professional, Recording, Artisan and Studio models, and many guitarists have had signature models released to celebrate the artists’ association with the company.  Since its reintroduction in the late 1960s, the Les Paul has remained in continuous production and, along with the Fender Stratocaster, it has become one of the most recognisable design icons of modern‑day guitar music.

Gibson continued to innovate into the early 1960s, introducing more convention‑busting designs. McCarty, hired famed car designer Ray Dietrich (1894‑1980) to cash in on the American automotive craze of the time. The new model was called the Firebird, which featured a more rounded‑off Explorer‑like outline, through‑body construction and rear‑facing banjo tuners. These first Firebirds, produced in 1963‑1964, were known informally as ‘reverse’ bodied because the upper treble bout was more pronounced than the bass bout. Again, due to poor sales and high manufacturing costs, Gibson simplified the fundamentals and ‘flipped’ the body to produce the ‘non‑reverse’ Firebird, made between 1965 and 1969, when it was withdrawn. As with many of other unsuccessful early Gibson solid body designs, the company has reissued the Firebird in both ‘reverse’ and ‘non‑reverse’ formats since. Other variants were made including the 12‑string Firebird XII and the Thunderbird bass.

McCarty stood down from Gibson in 1966 and became president of Bigsby Guitars. McCarty later collaborated with, influenced and mentored up‑and‑coming ambitious American luthier Paul Reed Smith of PRS Guitars. Smith honoured McCarty’s contribution to guitar building by dedicating him with a PRS McCarty model. McCarty died in 2001 at the age of 91.

As with competitors, Fender, Gretsch and Rickenbacker, the 1970s was a period of controversial experimentation while under ‘corporate’ ownership. Gibson produced many other solid body electric guitars than have been mentioned so far. Among the many ‘forgotten Gibsons’ of the period, there are some notable examples, including the Challenger, Corvus, Firebrand, Invader, L6-S, Marauder, RD series, S‑1, Sonex‑180 and the Victory.

While Gibson may have had considerable success with guitars, it has never quite found the same formula for basses, amps and acoustics as some of its competitors, including Fender. That doesn’t mean to say they haven’t made notable examples; they have, it’s just that they haven’t had the popular impact and longevity to warrant mainstream success alongside the recognised ‘classics’.

After McCarty’s departure, Gibson came under increasing commercial pressure. Things came to a head in 1969, when Gibson’s parent company, Chicago Musical Instruments Ltd (CMI) was taken over by a South American brewing company called ECL and then became a subsidiary of Norlin Musical Instruments in 1974. In the same year, Norlin shifted production of Gibson guitars from its long‑term home in Kalamazoo, Michigan to Nashville, Tennessee. In 1984, Gibson finally closed its old factory at Kalamazoo.

Following a similar pattern to Fender’s travails at the time, Gibson underwent a period of poor quality control and severe financial difficulties, often blamed on corporate interference by executives who knew little about, and cared little for, the company’s pedigree and its customer base. Ultimately, as happened with Fender, the company returned to private ownership in January 1986 to focus on its core business. The Gibson Guitar Corporation was close to liquidation when it was bought by three businessmen, Henry E. Juszkiewicz, David H. Berryman and Gary A. Zebrowski. Under the new management, the business was once again repositioned as a maker of high quality professional musical instruments.

While production of Gibson’s sold body guitars remained in Nashville, further production plants were also opened in Memphis, Tennessee (1984) for semi‑hollow models, as well as Bozeman, Montana (1989) for acoustic guitars. After having bought out its main American competitor Epiphone in 1957, Gibson strategically repositioned Epiphone as a budget brand and relocated production of Epiphone guitars to Japan in 1970 and then to Korea in 1983, mainly producing low‑cost versions of famous Gibson models.

In order to cater for the more exclusive end of the market, Gibson produced select instruments under an in‑house Custom Shop operation. Juszkiewicz built on the internal Custom Shop operations, the roots of which date back to around 1984 (3 years before Fender established its Custom Shop), and which became a separate facility based in Nashville from October 1993.

The Gibson Guitar Corporation, still a private company, has its headquarters based in Nashville, Tennessee and continues to develop and produce high quality instruments into the 21st century. However, it hasn’t all been plain sailing for Gibson. In May 2018, after a period of unsuccessful diversification into peripheral consumer electronics products and rapidly rising debts, Gibson entered Chapter 11 bankruptcy protection in the U.S. The widely anticipated move was intended to give the company sufficient time to restructure the business, with Henry Juszkiewicz still as CEO. Gibson intends to focus on profitable core musical instrument products, while divesting itself of the remainder of its ill‑fated and loss‑making lifestyle ventures. It is likely that Gibson’s rationalisation programme will succeed and the company will avoid liquidation. Like the phoenix symbolised on its Firebird guitars, Gibson will surely rise again from the ashes and achieve long‑term financial security.

Many vintage Gibson solid body electric guitars are highly regarded by collectors, musicians and enthusiasts alike, with many key models reaching high or very prices on the vintage guitar market with the 1959 sunburst Gibson Les Paul Standard is held in particularly high esteem. It will be interesting to see if a resurgent Gibson will be able to recapture the pinnacles of past glory. Watch this space…

Other Major American Electric Guitar Brands

While it might seem from the previous two sections that Fender and Gibson were the only companies responsible for all the key milestones in the solid guitar’s evolution, this is in fact far from reality. There have been innumerable manufacturers from around the globe that have been highly influential in shaping the market.

Epiphone – Epiphone’s illustrious history dates back to 1873 when the Stathopoulo family emigrated from Greece, via Turkey, and arrived in New York in 1903. The family set up a business in America making banjos and mandolins. By the end of WWI, the company became ‘The House Of Stathopoulo’, then changed its name to the ‘Epiphone Banjo Company’ in 1928, the same year that they started producing acoustic guitars. The name Epiphone derived from a combination of owner Epaminondas Stathopoulo’s nickname, ‘Epi’, and the Greek word ‘phon-’ meaning ‘sound’ or ‘voice’. In addition to musical instruments, Epiphone started producing amplifiers in 1935. Epiphone was Gibson’s main competitor in the production of high‑quality instruments, particularly archtop guitars in the 1930s and 1940s, such as the De Luxe, Broadway and Triumph models. It was only after World War II that Epiphone began to struggle, eventually resulting in its acquisition by Gibson in 1957. Initially, the new generation of Epiphone guitars were still made in Gibson’s American facilities, even though many of their instruments were re‑branded Gibson models. During the 1960s, Epiphone’s Casino, which was effectively their version of the Gibson ES-330, became particularly famous because of an association with English pop/rock band The Beatles. In recent decades, the Epiphone brand has come to represent the affordable end of Gibson’s output, complementing the parent company’s product lines. In the early 1970s manufacturing was migrated to the Far East, first in Japan, then Korea and, since 2004, Epiphone guitars have been made in a dedicated factory in Qingdao, China. Other well‑known model Epiphone names from their past include Emperor, Riviera, Sheraton, Olympic, Wilshire and Crestwood.

Gretsch – Another famous manufacturer with a long history dating back to 1883 is Gretsch. The company was founded by Friedrich Gretsch (c.1856-1895). Gretsch arrived as a 17 year old German immigrant to the United States in 1872. By 1883, aged 27, Gretsch was manufacturing banjos, tambourines, and drums from a modest shop in Brooklyn, New York. It wasn’t until the big band era of the 1930s that guitars became part of Gretsch’s core business with models like the Synchromatic and Electromatic. Gretsch became hugely successful with the explosion of blues, country and rock ‘n’ roll music in the 1950s. The man behind many of Gretsch’s iconic designs including the flamboyant White Falcon was guitarist Jimmie Webster (1908‑1979), who worked as sales and demonstration representative for Gretsch. NB. Webster was known as the inventor of the ‘Touch System’ of playing in the 1950s, popularised by Van Halen as ‘two‑hand tapping’ in the late 1970s. The demand for Gretsch guitars during this period enabled Gretsch to compete head on with Gibson and Fender. Gretsch’s association with guitarist Chet Atkins propelled their now‑iconic 6120 from 1955 to massive popularity. Like many other companies in the 1960s, Gretsch struggled and was bought out by Baldwin Pianos in 1967. By 1981, after a period of significant decline Baldwin finally wound up production of Gretsch instruments. Fred W. Gretsch purchased the brand name in 1985 and several attempts were made to restart production, including manufacturing in the Far East. Gretsch has been under Fender patronage since 2002 with Fender having the controlling interest and the Gretsch family retaining ownership. A rejuvenated Gretsch company, with Fender’s support and endorsement from rockabilly guitarist Brian Setzer has, once again, become successful. Well‑known model Gretsch names from their history include the White Falcon, Country Gentleman, Tennessean, Viking, Anniversary, Jet and Corvette, often carrying obscure and confusing numerical model numbers.

Rickenbacker – Rickenbacker’s history is shorter than some of its competitors and has been widely covered in other parts of the guitar’s story. Rickenbacker only emerged in the early 1930s first as Ro‑Pat‑In then as Electro before formally adopting the Rickenbacker name. Rickenbacker was crucial in the early development of the electric guitar. However, it wasn’t until the late 1950s that Rickenbacker’s fortunes found a new lease of life and took a major upturn that would lead to the current day. In 1953, Adolph Rickenbacker sold his company to music industry businessman F.C. Hall (1909‑1999), founder and CEO of media company Radio-Tel. Under Hall’s ambitious leadership, the company introduced a number of innovative guitar models, which proved popular with many bands during the nascent rock ‘n’ roll era. In an inspired move, Halll hired illustrious guitar maker Roger Rossmeisl (1927-1979) in 1954. Rossmeisl was responsible for the design of Rickenbacker guitars including a number of iconic instruments released in the late 1950s, including the ‘Capri’ 300 series guitars from 1958 and the equally influential 4000 series basses from 1957. Both of these designs, along with a number of others, are still in production today. Rickenbacker’s artist association with, particularly, The Beatles and The Byrds in the 1960s, cemented the brand’s rightful place in guitar history.

Danelectro – While it may not be an obvious choice for coverage, it is worth mentioning Danelectro. The company was founded in 1947 by Lithuanian immigrant Nathan ‘Nat’ Daniel (1912-1994) and based in New Jersey. The company started out by making guitars, basses and baritones for other companies including Silvertone models for the Sears & Roebuck department stores and mail order, and Airline models for Montgomery Ward. The strategy enabled Danelectro to start making guitars using its own name by 1954. Daniel innovated by using unorthodox materials and construction techniques, at least hitherto unusual in the guitar building industry. The resulting instruments have a distinctive look and sound that also enabled the company to produce no-frills instruments at competitive prices for the mass market. In a clever move under the Silvertone brand, they produced guitars with a valve amp built into the guitar case, so customers could buy everything they needed in one convenient, portable package. The brand is important historically because it enabled many young aspiring musicians to buy instruments at low cost. The unique approach also attracted many professional players to use Danelectro instruments, including guitarists like Jimi Hendrix, Rory Gallagher, Jimmy Page and Beck. Like many other American companies, including Fender and Gibson, Danelectro struggled in the 1960s and was sold to industry giant MCA in 1966, only for the factory to be closed down in 1969. The brand was resurrected and started making guitars again in 2006.

PRS – Compared to some of the well established brands that have been around much longer, PRS Guitars is really the new‑kid‑on‑the‑block, founded by American luthier Paul Reed Smith in Annapolis, Maryland in 1984. In a relatively short period of time, PRS has gained an enviable reputation for high quality instruments and amps, cleverly finding a niche in the market that is different from their competitors. Taking design influences from Fender and Gibson amongst others and adding something new and fresh of their own, PRS managed to build substantial market share rapidly from seemingly nowhere.  Having guitarist Carlos Santana on board from the start and bringing in ex‑Gibson president Ted McCarty as Smith’s mentor didn’t harm the company’s credibility either. PRS introduced stunning instruments, starting with the Standard and Custom, recognised for their immaculate craftsmanship. Many PRS instruments have distinctive features including exquisite highly figured tone woods, superbly engineered hardware and distinctive unique ‘bird’ fingerboard inlays. The company grew swiftly; relocating to a major new American factory in 1996 and from 2003 PRS established a range of more affordable SE (standing for ‘Student Edition’) models manufactured in Korea. PRS’s success demonstrates that the industry’s barriers to entry are not insurmountable and with the right strategy, it is still possible to enter the market and to grow market share despite well‑established competition, and without being straightjacketed by historical constraints.

Other Guitar Brands From Around the World

Guitar design, production and sales are not restricted to just a few large American companies. In America alone, there are many thousands of guitar manufacturers past and present. Many names will be familiar, such as Ernie Ball/Music Man, Peavey, Guild, Jackson, Dean, BC Rich, Ovation, Supro, National, Kay, Harmony, etc., through to innumerable custom and boutique luthiers. Some of these manufacture instruments in the U.S. while others are American companies that source part or all of their guitars from the Far East. A quick look around the globe highlights many other fertile guitar making territories…

Europe – Particularly following World War II when embargoes and tight trade restrictions limited exports of guitars from America, a combination of high demand for guitars and low supply provided an opportunity for some enterprising European companies to fill the gap. Many of these guitars followed the influence of American designs in the knowledge that young people in Europe aspired to emulate their American counterparts. Britain and continental Europe have produced many guitar brands over a long period of time including from illustrious companies such as Burns, Duesenberg, Eko, Framus, Hagstrom, Höfner, Hohner, Patrick James Eggle, Shergold, Gordon Smith, James Trussart, Vigier, Vox, Warwick, Watkins, Zemaitis, etc.

Far East – The Far East isn’t only responsible for producing low cost guitars for American and European guitar brands. During the 1970s, Japanese firms were producing affordable, high quality copies of American guitars, taking advantage of high labour prices and poor quality control in the U.S. However, there has also been a notable history of guitar manufacture in its own right, including some very quirky and idiosyncratic models. Many of the big names from Japan include, Aria, ESP/LTD, Ibanez, Italia, Teisco Tokai, Yamaha, etc.

Eastern Bloc – While not widely recognised as a guitar‑making region, largely because of its nationalistic political regime and economic protectionism, the Eastern Bloc countries have produced a diverse range of instruments over an extended period of time. There is a vast array of models bearing many unfamiliar names such as, Aelita, Formanta, Jolana, Migma, Tokina, etc.

As you might expect, the fascination with the world’s favourite instrument is genuinely global and they have been made in every corner of the world, including Australia, Canada, South America and, to a lesser extent, the middle east (where the guitar’s story began after all!) and Africa.

Other Factors

Although this section focuses on electric guitar production, it is worth remembering that acoustic guitar manufacturing is also thriving in the 21st Century with famous specialist brands such as Martin (based in Pennsylvania since 1833) and Taylor (based in California since 1974) at the forefront of innovation and technological development. Of the major American electric guitar makers, it is only really Gibson that also has a reputable range of professional acoustic instruments. Elsewhere, Yamaha has a strong range of Far Eastern acoustic guitars. There are numerous other manufacturers to be found producing fine acoustic guitars at all price points in the market.

The 21st Century landscape of guitar production is one of global diversity and differentiation. Modern guitars may have been hugely influenced, if not defined, by a small number of American companies but it is by no means a monopolistic industry; quite the opposite in reality. The long‑term viability of guitar making is inextricably linked to the music industry and what happens will rely heavily on musical trends and influences.

There have been many challenges to the dominance of the electric guitar, notably during the 1980s and 1990s with proliferation of synthesizers and in the 2000s as home production of electronic music became affordable and accessible. However, the popularity of the guitar seems (relatively) assured, despite many cynical commentators regularly proclaiming ‘the death of guitar music’. Digital technology is bringing a new challenge to guitar makers, so it will be up to countless luthiers around the world to rise to the challenge, seek new opportunities, adapt the guitar and make it truly a universal instrument and secure its future success for generations to come.

End of Part VI

Over these last six instalments, I have covered the guitar’s history from its vestigial beginnings in the ‘Cradle of Civilisation’ to the birth and proliferation of the electric guitar. There is just a little of the long and winding path left to travel and I hope you’ll join me for the remainder of the story. The next article has yet to be written, due to personal circumstances. While I hope to publish it next month, it is by no means certain. Fingers crossed. Until next time…

CRAVE Guitars ‘Quote of the Month’: “Contrary to popular opinion, great minds most definitely do not think alike. Similarly, great musicians do not play or sound alike.”

© 2018 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?
30 Sep 2017

September 2017 – A Map Leads To Some Hidden Gems

by | posted in: Event, Observations, Opinion | 0

Phew! I am still recovering from last month’s article (‘A Peak into the Pandora’s Box of Guitars’). As with many of CRAVE Guitars’ musings, it should have been a straightforward subject but the research and production took a disproportionate amount of time compared to likely audience interest – I know 3 people who read it and one of them is me! This month’s article is a little more prosaic and shorter; a fizzy cocktail of insight with a little pinch of observation and a cheeky twist of opinion.

Now CRAVE Guitars is into its 2nd decade and also now post-relocation, there is much to consider. The good news is that there is a new member of the CRAVE Guitars’ family, possibly the last acquisition of 2017, as funds have once more expired and there are too many other high priority calls on finite lucre. I hinted last month that the new purchase epitomises CRAVE Guitars’ philosophy while also being very divisive – a real ‘marmite’ guitar. This procurement, and the dilemma that led up to it, started me thinking about why we choose the guitars we do and particularly how this relates to an interest in vintage guitars while avoiding the traps of ‘accepted wisdom’ and cliché.

Also, picking up on some of the nuances of last month’s article, questions are also raised about getting the balance right between being different enough to stay ‘fresh’ while not being so ‘out there’ as to be insignificantly weird. To niche or not to niche, that’s the question (apologies for making an English noun into a verb – however for etymology nerds, the English word niche derives from the French verb ‘nicher’, to rest). For the sake of clarity, the meaning of niche here refers to ‘specialised market’.

Despite committing the vast proportion of my adult life to the responsibilities imposed by the Protestant Work Ethic, capitalist economics and the expectations of family life, I am at heart part-hippie, part-maverick, part-anti-establishmentarian and part-social deviant. However, in order to function effectively in society at large, one has to be pragmatic. I am also intensely curious, profoundly questioning and not one to accept the norm just because someone asserts that I must. This attitude may be fuelled by the fact that I am also burdened by a particularly English trait; I tend to side with an underdog facing up to overwhelming odds. Anyhoo… I digress and it’s time to get to the point(s).

This month, I am focusing predominantly, and rather unusually, on a single guitar and all the contextual thoughts that it provokes. The ‘new’ vintage guitar is… drum roll please… a 1983 Gibson USA Map.

1983 Gibson USA Map

→ Click here to read the feature on the 1983 Gibson USA Map

Not aware of it? I’m not surprised, as they were only made for a very short time and for a specific purpose. I won’t repeat the history here but if you are interested, take a look at the feature [feature link here]. Admittedly, on the face of it at least, it is an extraordinary looking musical instrument. It was reasonably innovative for a traditional company like Gibson. It is precisely because of its off-beat looks that I think it is very cool, as well as being very rare. So much so, I had to import this example into the UK from mainland Europe.

How many have you seen in the flesh, let alone played? I may be in the minority in thinking it’s rather fancy. I can see a large proportion of the population saying (or at least thinking), “what the f**k is that?” That reaction was precisely my son’s verbatim response when shown it. Even the seller, a reputable Dutch guitar dealer, described it as a “funny shaped guitar”. To me, those subjective, superficially dismissive comments just make the guitar all the more fascinating, both as a serious instrument and also as part of vintage guitar heritage. Perhaps, to me, the unusual is beguiling and makes me want to look deeper than the superficial.

Is the Map simply an imprudent case of style over substance? No, far from it. Some minor ergonomics aside, it is a Gibson after all. The more I looked into it, the more I became intrigued by the tension between the standard Gibson appointments and the departures from the norm. It would take a whole article to dissect the instrument and discuss the similarities and differences. Suffice to say, I was hooked, if only because it is SO unusual and quirky. Within the broader social and economic context at the time of its birth, it becomes even more beguiling for someone like me. You probably won’t be surprised that I believe it should be taken far more seriously than it is and this article will hopefully explain why.

The Gibson/Epiphone USA Map isn’t the only guitar to share the inspiration of the USA mainland as a body design. In the early 1960s, some 20 years or so before the Epiphone/Gibson, National/Valco produced the Newport and Glenwood Res-o-Glas ‘map’ guitars. The geographical aesthetics were more impressionistic but it was still clearly based on the shape of the continental USA. Eastwood now make a modern wood-bodied version of the National’s map guitar.

Unlike the earlier National, the outline of the Gibson USA Map is a much closer representation of the lower 48 states. As these guitars were made in tiny numbers, it wouldn’t have been produced on computer-controlled machines, the bodies would have been cut by hand on scroll saws, so to some extent, each one will be unique. The edges of the body clearly show the intentionally ‘unfinished’ saw marks, which is, I think, a great touch. The craftwork around the Great Lakes is also impressive.

The body is sandwich construction comprising 2 layers of slab-cut mahogany with a thin layer of maple between, presumably for added strength, given the vulnerability of the design. Most, but not all, were finished in natural satin nitrocellulose. While Gibson/Epiphone did make a very small number of guitars in ‘stars-and-stripes’ finishes, I do wonder why Gibson never produced one or two with the 48 state boundaries outlined. Now, that would be a cool option. It isn’t worth refinishing one of these rare axes just to try it out though. Epiphone even did a sunburst version, which seems a strange choice.

So… after a great deal of agonising and deliberating about whether it was the right thing for CRAVE Guitars, I went ahead and bought it anyway. Why on Earth would I spend a lot of money for a 1983 Gibson USA Map when, for the same price, I could have got something with a better reputation and far more likely to increase in value, you may ask? I did struggle with this particular dichotomy for several days before I took the plunge. Am I insane? Under the circumstances, I sincerely hope so. There is, however some sort of rationale.

Before we get there, it is worth touching on why the Gibson USA Map is noteworthy and why it is important to conserve it. The model clearly meant something to Gibson at the time. While the Epiphone and Gibson Maps were only made as a limited edition promotional item to showcase what Gibson could do. The model also appears to have been significant to Gibson’s overall marketing strategy in the early 1980s. The importance, albeit indirectly (it wouldn’t, or rather couldn’t, earn large sales revenues in itself), of the Map to Gibson’s commercial fortunes therefore marks it out as being of special interest. It was not just a company product; it was a symbol of national pride and patriotism in the face of industrial complacency, stiff overseas competition and impending economic recession. The Map was positioned front and centre of Gibson’s advertising campaign of the time, “American-Made, World-Played”. It also appeared on the front of the company’s full line catalogue and was featured on the cover of the Gibson guitar owner’s manual.

Interestingly, the guitar used in the advertising photoshoot was slightly different from the ones that reached the public. The differences include the pickup selector switch, bridge/tailpiece, speed knobs, jack plate, strap button and a bound neck. Interestingly, the face of the headstock is not visible in the photo, so it isn’t possible to determine whether it carries the Epiphone or Gibson logo.

Essentially, at the time, if you were into Gibson or Epiphone, you couldn’t avoid the Map’s imagery, even though most customers were unlikely to see, let alone be able to play, one. Perhaps the Map’s physical rarity was intended to motivate aspiration for the almost-but-not-quite attainable. Anecdotally, the Epiphone versions were made first to help bolster sales and when they proved popular, the branding was changed to boost Gibson sales. Presumably, if the tactic had failed, there would have been no Gibson versions and no impact on reputation. However, the strategy proved to be a success, even though ‘production’, if you can call it that, ceased in 1984 due to Gibson’s manufacturing facilities being moved from Kalamazoo to Nashville and skilled company craftsmen being laid off. All Epiphone manufacture was moved to Korea, also from 1984.

Gibson has dabbled with reissues of the Map from both Gibson’s Custom Shop and the Epiphone brand; the latter possibly intended to deter the many imitations and fakes that have appeared over the years. The longevity of the model now seems assured, albeit in low numbers to meet variable demand, compared to the more popular classics. Beauty (and therefore desirability) is in the eye of the beholder.

Original early Gibson USA Maps will undoubtedly remain Cool & Rare American Vintage Electric Guitars. I get the feeling that the original Maps will at some point become much sought after in the same way as the first Gibson Modernes that appeared around the same time. The Moderne had a similar ephemeral presence and, like the Map, has also now been reissued. Those rare 1980s Modernes seem to trickle onto the market at some pretty exclusive prices. I’m glad that I got my Moderne while it was still overlooked; I certainly couldn’t afford one now! Will the same apply to the Map at some point? I watch with interest.

This eventually begins to get to the nub of why the Map is now a CRAVE Guitar. You may have noticed that I make a concerted effort to be ‘different’ from the mainstream collector or dealer. Whereas they tend to focus on the usual Strats, Teles, Les Pauls, SGs and ES-335s (after all, that’s where the money is… or will be), I try to occupy a different space. The classics are great guitars and I love them all; I even own a few. However, after a while they can get a bit samey and can become a little bit ‘meh’ after a while. “Heresy! Burn him at the stake!” I hear you scream. In my defence, you may have experienced a similar phenomenon at one time or another, especially if the amount of choice can be overwhelming. In abundance, they can elicit that dreaded ‘so what?’, glazed-eye effect. It’s a bit like going into modern music retail warehouses where there is a whole wall of the same model and they all begin to merge into one homogenous whole and the impact of each individual instrument, however good it is, can be lost. Cool and rare vintage Guitars aren’t like that and ones like the Map tend to stand out from the crowd.

In an attempt to keep things interesting, I actually made a conscious decision to seek out something that marks out a CRAVE Guitar as being a bit different from the run‑of‑the‑mill. By doing this, I might just become recognised (or ignored) for doing something a bit different from what everyone else does. In a world where guitars can sometimes look the same, feel the same, play the same, and sound the same, there needs to be something unexpected to make one stand out from the plain and ordinary. I simply can’t afford the really exotic examples, so my only option is play in the ballpark of ‘affordable vintage’ and throw in the odd curveball. Therefore, my ploy is to differentiate CRAVE Guitars from A.N.Other Guitar Shop, and the best way to do that is through the instruments themselves.

In addition, my simple brain processes told me that someone has to conserve and act as steward for a few selected examples of the more obscure, lower demand models for future generations. This may constitute foolhardiness or bravado but I don’t see anyone else doing exactly what CRAVE Guitars does.

The almost inexplicable allure of these oddities started me thinking, at which point you probably roll your eyes and think, “Oh god, here he goes again!!!” I have been, and still am, attracted to some very unusual vintage instruments that many pundits will automatically condemn. At least I have thought about it and made an irrational choice to be concertedly un-lemming-like and, perhaps worryingly, un-business-like.

I have plenty of evidence within the CRAVE Guitars’ family to support my conjectures. For instance, my compassionate adoption of some widely regarded ‘ugly duckling’ guitars, including:

  • 1974 Ovation Breadwinner
  • 1980 Gibson Flying V2
  • 1981 Gibson RD Artist
  • 1982 Gibson Moderne
  • 1983 Gibson Corvus II
  • … and now the 1983 Gibson USA Map
CRAVE Guitars’ Unconventional Guitar Designs

Then, there are the traditional mainstream brands that produced some marginal designs. In my view, these are also quite endearing and worth mentioning but, again, they are not favoured by the conservatives (yet). Perhaps these guitars, also part of the CRAVE Guitars’ family, may be best described as ‘plain ducklings’:

  • 1965 Gretsch Corvette
  • 1974 Rickenbacker 480
  • 1976 Music Man Stingray
  • 1977 Gibson L6-S
CRAVE Guitars’ Unconventional Guitar Designs

… then, there are the so-called ‘student’ models such as the short-scale offset Fenders (Musicmaster, Duo-Sonic, Mustang and Bronco), the dinky Gibson Melody Makers (and Epiphone Olympic) and the Silvertone 1449 (and 1457, as well as the full Danelectros). You may begin to get the picture. For some peculiar reason, I have an affinity for these less desirable (and therefore less valuable) instruments. They aren’t eminently collectable for the greedy investment brigade but I think they have many often‑overlooked positive attributes. Bring them together under CRAVE Guitars’ banner and I think they represent a pretty cool angle on a captivating period of modern guitar history.

CRAVE Guitars’ ‘Student’ Guitar Models

Even where the classic guitar designs are concerned, where possible, I try to seek out the unusual. For instance, I intentionally went for a Fender Stratocaster Dan Smith-era ‘2‑knobber’ and I’d like to get hold of a similar-period active Elite. Telecasters? I lean towards the Thinline, Deluxe and Custom (and Elite) rather than the standard. Offset Fender Jazzmasters and Jaguars? Bring them on. Unlike most, I think the Fender Coronado is cool, as is the Starcaster (the latter is still on my ‘wanted list’) Les Pauls? I prefer the Deluxe or the Recording (I’m still looking for a good one of the latter or its predecessors the Personal and Professional). Given the choice, I’d prefer a Junior or Special over a Standard or Custom most days (as long as I have the latter to hand as well!). Gibson Explorers or Firebirds? Yes please. Semis? I prefer the ES-330 to the ES-335. Go figure.

1983 Fender Stratocaster ‘Dan Smith’
CRAVE Guitars’ Variations On A Theme
CRAVE Guitar’s Fender Offsets

Here are some unusual models that are on CRAVE Guitars’ ‘wanted’ list…

There is, of course, a huge risk to venturing too far off the beaten track and into wild guitar country. Firstly, sinking inadequate, valuable funds into potential white elephants is not advisable in anyone’s book. You may be surprised to know that I actually do care about this for 2 reasons: a) I don’t have infinite funds to burn on a laughing stock of geeky guitars, and b) I might want to trade up at some point, so having unsellable guitars that no-one wants is not a good strategy. However, I like to think that one day, when people eventually see the light of day, my whacky and weird bits of obsolete firewood might actually become the desirable antiquities I think they deserve to become. In the meantime, they will remain curios of a bygone age.

Given that the real rarities will forever be out of my humble reach (a 1958 Gibson Explorer anyone? According to records, only 6 shipped that year), it means that my attention tends to be refocused on guitar delights from the 1970s and 1980s. Yes, before some of you get on your high horses, this is the exact same period that all ‘learned commentators’ vehemently and vociferously despise for poor quality, lost craftsmanship and corporate interference. The epoch that I’m talking about are the so-called ‘dark ages’ when CBS owned Fender, Norlin owned Gibson, Baldwin owned Gretsch and MCA owned Danelectro. However, my argument goes that, if you are rich or narrow-minded enough to close your eyes to anything post-1965, you will never see or experience some very creative experimentation. For example, the first tangible example of the Gibson Moderne didn’t appear until 1982-83 while the Gibson USA Map appeared only in 1983-84. Love these instruments (as I do) or loathe them (as many do), they shouldn’t be ignored without some contemplation. I maintain that there are many hidden treasures from this period and… one day… the nay-sayers will catch on and catch up.

There are plenty of odd creations from this period, some of which are great, some mundane, some remarkable and some downright awful. Into which category they fall into is not just what the purists say. For instance, there are some unpopular guitars out there with some very interesting attributes. Generally un‑loved Gibson examples include the S-1, Marauder, Sonex-180, Firebrand, ‘The Paul’, Invader, Challenger and Victory. Many of these unusual Gibsons are also on CRAVE Guitars’ ‘wanted’ list…

Fender also produced some unusual creations in the USA in the 1960s and 1970s, such as the Swinger, Marauder, the (mythical) Maverick, the XII, Bass VI and Montego II before going with the more mainstream but commercially unsuccessful Lead and Bullet. In Japan, Fender created guitars not based on previous  fender designs including the Performer, Katana and Flame. Fender’s strategy from the mid‑1980s seems to have been to experiment with Squier models – if unsuccessful, they wouldn’t damage Fender’s credibility but if successful, they could be re‑branded by Fender.

Some of the ‘budget’ USA Fenders on CRAVE Guitars’ ‘wanted’ list…

Trivia fact folks: In 1982, Fender strategically consolidated its budget off-shore production under the Squier brand in Japan. However, did you know that Squier as a musical instrument company actually dates back to 1890, founded as V.C. Squier by Victor Carroll Squier in Michigan, USA? Squier was predominantly a string maker and supplier for Fender from 1963 before being acquired by Fender in early 1965 shortly before Fender itself was taken over by CBS in the same year. Fender marketed Squier strings until 1972 and, by 1975, Fender had dropped the Squier name. Squier remained dormant until it was revived in 1982 as the main brand for guitars built by the newly established Fender Japan Ltd.

Some of these short-lived eccentric guitars from Fender and Gibson are truly rare beasts with just a few hundred or low thousands ever going into circulation. Some of them will eventually attract speculators, simply because of their brand, age and relative scarcity, or through trendy artist association. For instance, vintage market values for the previously unloved Fender Bronco soared after Alex Turner of Arctic Monkeys used one and collector interest in the model grew rapidly. When that investment trigger is pulled, just watch the vintage values spiral quickly to silly levels, as keen demand outstrips limited supply. The Bronco is another model on CRAVE Guitars’ ‘wanted’ list.

Capitalist economics are founded on the principle of growth and, in order to keep growing, companies have to innovate. Logic suggests that some ventures will be more successful than others. As the late, great Frank Zappa (1940-1993) once said, “Without deviation from the norm, progress is not possible”. He was right and that principle applies aptly to guitar heritage. When compared to the acknowledged classics, many of these lesser models didn’t last very long and quickly disappeared into relative obscurity without a second thought from musicians at the time. Many of these ephemeral idiosyncrasies and dead ends in the guitar family tree are the ones that fascinate me as much as the perennial classic designs do.

In the fickle consumer marketplace, success of new guitar models, even from major brands, isn’t pre-determined or assured. Just remember that some now-legendary Gibson guitars didn’t last long on their original release, e.g. the Explorer, Flying V (both 1958-59), Les Paul Standard (1958-1960), and ‘reverse’ Firebirds (1963-65), all of which were dropped due to poor sales, only to be reintroduced later to massive success. The Gibson Moderne was part of the ‘modernistic’ series designed in the late 1950s although it never reached market. Even Fender flopped with the original Jazzmaster and Jaguar. Now look at their popularity. I blame the punters myself (joke)!

As Stephen King wrote, “sometimes they come back”. The USA Map is not the only phoenix to rise from the ashes of past ‘failures’, following a quiescent period. Gibson examples include the L6-S, RD, Moderne and Melody Maker. Fender examples include the Coronado, Mustang, Duo‑Sonic and Bass VI. Glad to see them back, albeit in different form from their progenitors. We can expect these companies to keep trying to introduce shiny new models alongside the classics and these reintroductions for a new generation.

So is CRAVE Guitars’ skewed sense of objectivity in showcasing the oddball guitars from the past a risk worth taking in a fiercely competitive and currently unstable vintage guitar market? I think it is but you may well adopt a contrary view. Discuss…

I guess it’s all about balance – having enough of the widely-regarded classics to get a foot in the mental door of the attention deprived gearhead while also getting enough attention such that people become more aware of the delights of the many unique guitars that proliferate around the margins of major brand guitars. Is it just me or are those peculiar ‘ugly and plain duckling’ guitars mentioned above, fantastic examples of the guitar makers’ creative dalliances reflective of the world in which they were originally created? Will they ever be re‑evaluated as ‘beautiful swan’ guitars? Probably not, but they should not to be ridiculed as abhorrent out of prejudice without some sort of contextual re‑assessment.

Just take another look at the montages of some of the leftfield instruments from Fender and Gibson above and I challenge you to maintain that they are not worthy of your attention. I came across a plainly ignorant headline when doing this research for this article, “stupid CBS and Norlin era guitars”. I contest that such hyperbole represents uninformed rhetoric by someone who is possibly not very bright and mouthing off to get attention. I take the alternative view and suggest that they actually look pretty cool in context and they aren’t bad musical instruments to boot. Not only that, they make ideal entry points into the world of vintage guitar collecting, being relatively low cost and risk free. Yes, they have idiosyncrasies but so what? That just makes them all the more interesting.

What I must do, though, is to resist the temptation of obsessing solely on the weird and whacky to the exclusion of the familiar or it will just end up as a bizarre dead‑end, the point will be well and truly lost, and CRAVE Guitars will sink into the same obscurity as many of the oddities it intended to showcase. My aim is to present the unconventional alongside the conventional as necessary counterpoints of contemporary guitar design culture. Going Zen, they represent the yin and yang of guitars if you will.

Now that it seems I am ploughing this particular furrow, it reiterates the fundamental question I posed a couple of articles ago, that is, what the heck do I do next with CRAVE Guitars and how do I convert it into some sort of going concern? I’ve established that CRAVE Guitars has to be a modest entity, that it wants to be something different from the norm, but not so different that it becomes overlooked and invisible to would‑be enthusiasts and aficionados. I like to think that I’m doing something right.

You know what might just happen, based on my luck and actual experience? I will beat my head against the brick wall of impenetrable puritanical dogma until I eventually give up. The cynic inside me says that I’ll sell off the CRAVE Guitars’ family at ridiculously cheap prices just to move them on and, the day after I do that, the market will boom  and others would benefit from exactly what I’d been striving for in splendid isolation for the last 10 years. The scathing axioms of ‘I told you so’ and ‘he was before his time’ will ring hollow in my desolate dispossession. I’ve been in that position before and it’s not a very nice place to be. So I will persevere.

That’s enough of the doom and gloom. More Positive Mental Attitude required – CRAVE Guitars is still here and hopefully here to stay in one form or another for the foreseeable future. Let’s get back to the crux and rejoice the glorious miscellany of vintage guitars, including all the many heterogeneous ‘mutations’ that have occurred along the way. We wouldn’t be able to judge the sublime without the ridiculous to measure them up against. They are all part and parcel of our diverse, crazy, guitar‑distracted life.

The celebration extends to the 1983 Gibson USA Map that started this little debate in the first place. I think the Map is wonderful in a zany sort of way and we shouldn’t lose sight of it as part of the bigger picture. Isn’t it funny how a seemingly straightforward event can lead to something deeper and, from my perspective, quite interesting? One thing I’m certain of is that purchasing an ‘ordinary’ Strat or Les Paul would not have warranted this sort of conversation.

I mentioned at the top of this article that I deliberated as to whether to buy the Map or something else more sensible. You may ask, what else I might have gone for, had I chosen to forgo the opportunity of acquiring the Map? There are many vintage guitars that I would be tempted to go after; way, way too many to mention. However, on this occasion it wasn’t a straightforward either/or decision. It was go for this or wait until something else cropped up to spark my craving (sic!). The Map just got there first. However, it wasn’t an easy decision for all the reasons outlined above. What next for the Map? Not a lot; it is so unique, it’s likely to hang around for a while. I did think it might become CRAVE Guitars’ signature instrument but the Les Paul logo still fits better with the image, I think. Thoughts?

1983 Gibson USA Map

Unless something changes, there is nothing new in the procurement pipeline for CRAVE Guitars at the moment, so next month’s soliloquy is likely to be back to rambling randomness (or “pretentious waffle” as my other half calls it!). In the meantime, spread peace, love and music to change lives for good and let’s make the world a better place, one guitar at a time. I’ll be plinking CRAVE Guitars’ most recent vintage acquisitions, the 1978 Fender Mustang covered two months ago and the 1983 Gibson USA Map.

1978 Fender Mustang

I will keep looking for unusual guitars. On the basis of the research for this article, I may just take another look at what’s out there and report back in due course. The Map may just lead to something interesting!

Musically, I’m off too Looe Music Festival 2017 (29 September to 1 October) with The Jesus & Mary Chain, Lulu and Happy Mondays headlining and some other credible artists on the line up (The Undertones, Cast, Reverend & The Makers, etc.). This event signals that the UK’s music festival season is pretty much concluded for this year.

That’s it for now. Until next time…

CRAVE Guitars ‘Quote of the Month’: “Deviance is a lack of conformity which, to a degree is essential, as it separates the remarkable from the homogenous.”

© 2017 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?
31 Aug 2017

August 2017 – A Peak into the Pandora’s Box of Guitars

by | posted in: Observations, Opinion | 0

Over the last 30 months or so, I’ve been going on and on about the mainstay of CRAVE Guitars ‘work’, which is to share with you not only stuff about music and stuff about guitars generally but also specifically stuff about Cool & Rare American Vintage Electric Guitars. If you’ve taken a look at the web site, you’ll know that the focus tends to be on mainstream U.S. brands and, within that, if possible, some cool variations of well-established guitar models. However, perhaps stating the bleeding obvious, the guitar world is much bigger than that.

This month I’m dipping a toe in the water of some of the other guitar treasures out there. When one looks across the whole guitar landscape, antique, vintage, old, used, new, American, European, Eastern bloc, Asian, mass manufacture, boutique makers, unique luthiers, home‑made, traditional, basic, hi-tech, innovative and whacky, there is infinite variety and a veritable cornucopia of interesting and wonderful instruments to appreciate. The same goes for amps and effects of course (as colleagues into those things keep reminding me) but there’s not enough room in a single article for those as well. Besides, although I don’t claim to be an expert on guitars, I’m even less well‑acquainted the minutiae of amps and effects – that’s another ballgame altogether. The focus of this article is essentially on electric instruments.

When researching this article, it became ridiculously clear that I simply can’t do justice to every aspect of this enormous topic. I can only mention a figurative iceberg’s tip of what’s out there and I apologise in advance for the probable monumental omissions herein. Before we get going, none of the guitars covered in this article are part of the CRAVE Guitars’ family. In order to illustrate the diversity, I’ve resorted to using pictures sourced from Google Images – I acknowledge all guitar owners and photographers.

Let’s face it, love them or loathe them, the centre of the guitar universe remains occupied by the American ‘Big Two’, Fender and Gibson, along with their subsidiary companies including, respectively, Epiphone and Squier that concentrate on the budget end of the market. Incidentally, Fender and Gibson also own a number of other iconic brands that come under their wing. For instance, did you know that Fender own Gretsch, Jackson, Charvel, DeArmond and Tacoma, and Gibson own Baldwin, Kramer, Steinberger, Tobias and Wurlitzer? Until the mid-2010s, Fender also owned Guild and Ovation guitar brands.

It would be easy to fall into the trap of thinking that Fender and Gibson are massive multinational industrial giants, but in actuality, they are pretty modest business concerns compared to the sheer scale and scope of some truly global companies. Fender and Gibson are, above all, very successful brands with a strong identity, whose reach extends well beyond the music industry. This general public awareness helps to shield them from some of the economic, social and technological pressures facing them. Business fortunes, however, go in cycles and the ‘Big Two’ have had their ups and downs. Both companies, along with many others, were taken over in the 1960s, leading to a period of corporate complacency and weakness that opportunistic competitors were able to exploit. While they have been able to rejuvenate their image, they are now dealing with a radically different global context.

While the ‘Big Two’ are fortunate to have genuinely iconic products including Fender’s Stratocaster, Telecaster and Precision bass, and Gibson’s Les Paul, SG and ES-335 (among others), this otherwise enviable position can also constrain them operationally. It has proved very difficult for them to innovate and stretch too far from the proverbial straightjacket imposed by their core instruments. Existing models are scrutinised minutely and often face intense criticism if they move away from the accepted recipe. At the same time, it is difficult for them to introduce all-new models, as they are often compared unfavourably with the classic mould. Without sustainable growth in a finite market, these companies are commercially vulnerable and their potential success is increasingly limited by their past. This strategic conundrum for Fender and Gibson actually creates fertile ground for other smaller firms to grasp opportunity to enter the market through differentiation, diversification and innovation, as well as imitation.

Circling around the ‘star’ of the Big Two, there are the other recognisable brands such as Rickenbacker, Danelectro, Guild, Ovation, Music Man (now part of the Ernie Ball corporation), G&L, and, as well as the aforementioned Gretsch (the Gretsch family retains major influence as part of Fender) and relative newcomers such as PRS. There are other companies that don’t immediately spring to mind but which have enormous presence in the industry. I include Peavey here, as one of the world’s largest musical manufacturing company. Then there are the other recognisable ‘independent’ American manufacturers that tend to focus on niche markets, such as BC Rich, Dean, Jackson, Alembic, Carvin, Schecter, Steinberger, Suhr, Parker, Heritage, etc. At the same time, some major US guitar companies focus predominantly on acoustic guitars, such as Martin and Taylor.

There is an incredible history surrounding brands that have either disappeared completely or those that have gone, some of which have now been resurrected, e.g. Supro, Airline, National, Dobro (acoustic, now part of Epiphone), Bigsby, D’Angelico, D’Aquisto, Silvertone, Kalamazoo, etc. American guitar manufacturers suffered particularly badly in the 1960s and 1970s as a result of multiple pressures including falling production quality, increasing manufacturing costs (including union labour), and hostile competition from high quality cheap imports from the Far East.

As you might expect, the history of many of the brands already mentioned goes back to the early-mid 1900s (or even further), which means that there are plenty of very cool vintage guitars floating around. In the guitar world, age doesn’t mean valuable – it is the combination of age, rarity, quality originality and current condition that matter for those with an eye on the dollar value. While the Big Two tend to command the premium prices, pretty much across the board, there are plenty of bargains to be had by looking more broadly at these, sometimes ephemeral makes. I recently come across an early 1960s U.S. Airline in all‑original clean condition that went for a little over £300GBP. These never were top‑of‑the‑range instruments back in the day, and they can be picked up as bargain vintage instruments now. Some of these leftfield guitars present low-risk options for entry into the vintage market if you research carefully and don’t expect too much. History suggests that, in all likelihood, they won’t accumulate vintage value very quickly without major artist association. Look around and there are gems to be found from under-the-radar guitar makers. Some are very nice, including Washburn, Hondo (mainly copies), Mosrite, Harmony, Kay, Valco (maker of a number of other brands), etc.

Moving away from the American continent, Europe also has a long tradition of great musical instrument manufacture, with brands such as Vox, Höfner, Baldwin, Burns, Watkins, Framus, Hagstrom, Hohner, Shergold, Hoyer, Wandre, Bartolini, Levin, Goya, Welson, along with newer entrants such as Warwick, Duesenberg and Vigier, Some of these were prolific during the ‘golden years’, capitalising on the rapidly moving musical paradigms of the 1960s and 1970s. A post-war embargo on American guitar imports certainly helped European brands (and bands) get a foothold and to prosper up to the early-mid 1960s. While, as in other markets, the quality of European guitars varied considerably, many models have become synonymous with the period and, as a result, highly collectable, for instance, the teardrop Vox guitar used by Brian Jones of The Rolling Stones or the Höfner violin bass used by Paul McCartney of The Beatles.

Even further away from America, the Japanese companies competed head on with the American brands in the 1970s. Plenty of the budget guitars were blatant copies of American guitars, which resulted in protracted litigation to protect U.S. patents and trademarks. Many ‘older’ guitarists may remember copies from the likes of CSL and Columbus, as well as Ibanez. Japanese firms didn’t just replicate American designs; some also produced original designs and have retained a credible reputation over time for quality and consistency, including their dominant brands – Yamaha and Ibanez. Takamine, which focuses predominantly on acoustic guitars, is also Japanese. There have been plenty of Japanese names that are or have been familiar, including ESP (and subsidiary LTD), Roland, Italia, Aria, Tokai, Teisco, Greco, Guyatone, Apollo, Kawai, Kent, Westone, etc. Many of the instruments made by Japanese companies in the 1960s and 1970s (including some copies) are now becoming very collectable in the off‑the‑beaten‑track vintage niches. If you want some truly whacky vintage designs at reasonable prices, take a look at Japanese guitars. Plenty of people now specialise in conserving these vintage Japanese/Asian instruments.

The old Eastern Bloc countries have also produced a wide range of brands catering for home-grown musicians. The strategy of government-owned manufacture was partly nationalistic, in that they were required to protect their home market from capitalist imports from both the west and east. Many of these guitars were typically utilitarian with little in the way of flamboyance. Many of these brands will be little known in the western world, even now. As you might expect, there are experts who concentrate on collecting these communist bloc guitars for posterity. The ones that have penetrated the western markets offer something different from, and cheaper than, the mainstream names. Look out for names like Aelita, Elgava, Formanta, Migma, Musima, Odessa, Stella, Tonika, Marma (East Germany), Jolana (Czechoslovakia), etc.

There are a few other territories that have developed their own guitar manufacturing, including Godin and Eastwood in Canada and Maton in Australia. In addition, there are a large number of unmarked guitars out there with no means of identifying age or source. Some can be traced back to similar designs by known manufacturers while the creators of others are lost in the mists of time and geography. These ‘pawn shop’ guitars are often poorly made and may be considered curios, although, there are aficionados looking to conserve the more vernacular heritage.

The modern-world picture is far more complicated and can’t be talked about in terms of familiar regional territories. Some multi-national companies, including Fender and Both Fender and Gibson have their headquarters in the US and produce large numbers of their subsidiary ranges in other countries. Some brands are designed in the US and constructed offshore. Some are assembled and quality checked in the US from parts made elsewhere. Larger companies have international distribution operations that channel product to dealership networks within economic regions, e.g. Fender UK servicing the European Union (at the moment!). Others have to manage distribution through networks of independent dealers. Some smaller companies have to rely either on local markets or alternative methods of distribution, direct or indirect. Some companies make instruments that are branded by one or more retail chains. A classic example is Silvertone whose instruments were made by Danelectro, Kay and others, sold through Sears & Roebuck department stores and mail order (remember that?). Similarly, many of the diverse Japanese brand names were actually made by a relatively small number of manufacturers, e.g. Kawai and Teisco.

Another feature of new millennium guitar building is the explosion in bespoke guitar building, either by small specialist companies or individual luthiers. Low volumes, creative designs, alternative materials, custom features, and high quality tend to characterise the sub-industry but there are always exceptions to the rule. There have, pretty obviously, always been bespoke builders catering for the well‑heeled or professional musicians’ need and this has led to further opportunities that are difficult for the mass manufacturers to match. In response, the larger manufacturers, including Fender and Gibson, created custom shop operations to provide tailored services for individual clients. Custom shops also heralded the explosion in vintage-styled recreations and the more recent craze for relic finishes, both building on the growth of interest in vintage guitars.

Remember, even the (now) big companies had to start somewhere, usually with an inspirational leader, visionary pioneer or commercial entrepreneur at the helm, often working on their own or in a small workshop. Many of today’s big brands started out with some names you might just recognise, including Friedrich Gretsch and son, Fred Gretsch Jr, Orville H. Gibson, Christian Frederick Martin, Adolph Rickenbacker, Nathan Daniel (Danelectro), Epaminondas Stathopoulo (Epiphone), and one Clarence Leonidas ‘Leo’ Fender. More recently, Paul Reed Smith has earned a place amongst this exlusive group. Even these industry giants relied on other key individuals and their skills including John Dopyera, George Beauchamp, Lloyd Loar, F.C. Hall, Les Paul, Ted McCarty, George Fullerton, Ray Dietrich, Roger Rossmeisl, etc.

Other well-known names span out of larger companies, for instance, Travis Bean, well known for metal-neck guitars, split from Kramer. Kiesel Custom Guitars is another example, producing some astounding instruments having been formed following the splitting up of American company Carvin in 2015. Perhaps the most successful modern entrepreneur is Paul Reed Smith of PRS Guitars, based in Maryland USA since 1985. While growing his reputation, Smith wisely sought advice from Gibson’s ex‑president Ted McCarty to mentor him, and several PRS models now proudly bear McCarty’s name. The tradition continues with renowned luthier Joe Knaggs setting up his own prestigious guitar company after leaving PRS, producing some wonderful instruments in relatively small numbers.

One of the most celebrated and influential craftsmen to exploit niche demand in the 1960s was Lithuanian immigrant to the UK, Tony Zemaitis who made some very remarkable guitars for some very remarkable guitarists. Zemaitis’ legacy can clearly be seen in other current models from the likes of Duesenberg and Teye, as well as the Japanese company that currently carries on Zematis’ illustrious name.

There have been many excursions into the application of alternative materials to wood. The use of metal in guitar production was pioneered by the likes of National and Dobro in their resonator guitars as a means of producing more volume from acoustic guitars in the pre‑electric era of the 1920s and 1930s. In the 1960s, Valco used fibreglass (coined Res‑o‑Glas) for futuristic designs in the 1960s, such as the stunning National Newport. More recently, acoustic maker, Ovation, used a variation of fibreglass (lyrachord) on its bowlback instruments. Zemaitis experimented with other materials in his guitar construction and many others have followed suit, including the aforementioned Kramer/Travis Bean. Around the same time, there was a ‘fad’ for acrylic guitar bodies, perhaps the most well-known proponent being Dan Armstrong who used acrylic for parent company Ampeg.

On this side of the Atlantic, another luthier has set the bar for innovative use of metal; French luthier, James Trussart, Italian company XoX Audio are making some nice instruments out of carbon fibre. 3D printing also presents opportunities for greater use of plastics and metals in guitar production. Some luthiers have experimented with stone as part of the construction but it is not common – or very practical. With ever increasingly stringent restrictions on sourcing, use, sale and movement of hardwoods commonly used in guitar production, expect wider use of alternative sustainable materials in the future.

There are hundreds if not thousands or even tens of thousands of guitar makers out there, all wanting a proportion of the overall demand for great guitars. Here are a very few notable names from all around the world to keep an eye on, including (in no particular order); Collings, Stone Wolf, Flaxwood, Palm Bay, Hutchinson, Emerald, Ed Roman, Suhr, Mayones, Nik Huber, Matt Artinger, Tom Anderson, Patrick James Eggle, Fano, Gus, Goulding, Prisma, Frank Hartung, Michael Spalt, Michihiro Matsuda, TK Smith, Rick Toone, Carillion, McSwain, John Backlund, Reverend, Ron Thorn, John Ambler, Mule, Tony Cochran, Walla Walla, Ezequiel Galasso, Langcaster… The list could be endless as there are just too many great guitar buillders out there to mention and apologies to those I’ve left out and, sorry, I can’t post pictures of every one – I wish I could. The point, I guess, is to broaden one’s perspective and perhaps open one’s mind to a wide range of other possibilities beyond the obvious in-your-face guitar shop fare. I don’t usually proffer advice but on this occasion, I would simply just say, take a look out there and you might just find something weird and wonderful that you probably didn’t know existed. I regularly feature some of this wonderland of goodies on Twitter for those that may want to take a look (@CRAVE_guitars).

For the amateur hobbyist or artisans with aspirations of becoming the next notable designer, there are now plenty of DIY kits for everything from generic product to some quite fancy customised guitar construction. Access to information the Internet provides plenty of plans and specifications for people to design and build almost any type of instrument without the need to track down books or luthiers willing to share their knowledge. Experimenting in this way can present all sorts of opportunities to be taken. What about you?

Renovation ‘husk’ projects are probably best avoided unless you really know what you’re doing, as there’s probably a reason why they are in that state to begin with. For some, though. a ‘bitsa’ guitar may make an ideal low cost player’s guitar. My lack of practical skills prevents me from trying out a DIY (re-)build beyond my limited capabilities. Besides, given CRAVE Guitars’ fundamental raison d’être, I simply can’t create an authentic American vintage guitar.

I hope that this article has given a tiny indication of the beauty and multiplicity of guitars out there. That’s without going into oddities with unconventional string configurations, double (or more) necks, hybrid instruments, etc. It is this fascination with making things different while also keeping things the same that is quite inspirational and, I think, pretty unique to guitars, at least on this sort of scale. We are blessedly spoilt for choice and there are some ridiculously good guitars out there for very reasonable prices without experiencing the diminishing returns associated with esoteric exotica. Ultimately, this clearly indicates that there is something for everyone with an interest in the world’s favourite musical instrument.

So… you may ask… what’s my favourite out of everything covered here? Truthfully, I can’t say; I find guitars endlessly beguiling and preferences vary continuously. It would be unfair to single any one brand or model from the others. As my obsessive quest for ‘Cool & Rare American Vintage Electric Guitars’ continues, the CRAVE name gives a hint of bias but that is not so dogmatic that I can’t appreciate all aspects of the luthier’s art and craftsmanship. MY position is firmly ‘on the fence’. If any of the names mentioned wish to persuade me off the fence with a prime example of their product(s), I am more than happy to accommodate them (f.o.c. of course!). I optimistically await a swathe of e-mails to that effect (hint, hint).

Me? I’m off to plink a new CRAVE Guitars’ plank. The new addition to the family is something both very recognisable and very unusual at the same time. All being well, I’ll try to cover it in next month’s article. All I’ll say at this juncture is that it is definitely one that fits the Cool & Rare American Vintage Electric Guitar bill very aptly while also strongly dividing opinion. Intrigued? The lengths we go to, to bring you guitar ‘stuff’. Watch this space…

CRAVE Guitars ‘Quote of the Month’: “There is a finite limit to the amount you can know, there is no limit to the amount you can imagine.”

© 2017 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?
31 Jul 2017

July 2017 – Happy Birthday: 10 Years of CRAVE Guitars

by | posted in: Observations, Opinion | 0

CRAVE (Cool & Rare American Vintage Electric) Guitars hits its double-digit birthday this year. Yep, ‘it’ has been in existence for 10 years now. This isn’t cause for a stupendous jubilee or anything like that (although I’m open to offers!). However, perhaps, for selfish reasons it deserves a moment of reflection, recognition and celebration of a modest milestone.

I don’t recall a specific date when, on one day CRAVE Guitars didn’t exist and the next day it burst into fully-formed existence, big-bang-like. I don’t think I’ve really thought about how CRAVE Guitars emerged from the primordial swamp and learn to breathe on dry land for the first time. Like a primitive heterotroph, it has become aware of its surroundings, still crawling about on all fours but unable to fend for itself or take advantage of the resources around it.

In terms of determining its own destiny, there is no driving ambition for the future. So… perhaps it is an opportunity to review CRAVE’s journey from infancy, through adolescence to what adulthood might hold for it. Before we delve headlong in, please bear in mind that this is a modest amateur enterprise built on a shoestring over many years of frustrating obsession.

Are you sitting comfortably? Then we’ll begin… Here’s how CRAVE Guitars came about. The journey began in the 1970s, experienced a frustrating hiatus during the 1980s, received a faltering nudge in the late 1990s, spurred into growth in the noughties, dealt disaster in the early teenies and is now beginning to repair the damage and put things back together around 10th anniversary-time.

1970s:

I started playing guitar as a young teenager in the early 1970s when my father gave me a used acoustic, not realising that it would have long‑lasting and far‑reaching effects. After attaining a level of competence that enabled me to play in bands and then realising that I wasn’t competent enough to earn a living at it, guitars became a benign hobby, rather than an occupation. I had a few favourite guitars left over from playing days, including a 1977 Fender Stratocaster hardtail, a refinished 1975 Gibson Les Paul Standard, a 1978 Music Man Stingray bass and a cheap old nylon-strung classical guitar, all of which, unbelievably, I still have!

1977 Fender Stratocaster
1975 Gibson Les Paul Standard
1978 Music Man Stingray Bass

1980s:

Ah, the odious decade of all-consuming ‘adult responsibility’, when guitars and guitar playing were relegated to a tertiary interest, left drifting aimlessly in the doldrums of work and family life. I have always put my own needs secondary and that, as they say, was that – my life was subsumed by the mediocre routine of daily existence. I did manage to keep hold of the core three electric guitars, hanging on a spare bedroom wall, relatively unloved. The least said about these ‘lost’ years the better in this context. The passion for guitars was, however, dormant rather than extinct. Perhaps my subconscious knew that, someday, that sleeping volcano would lumber back to life.

1990s:

In a rollover from the 1980s, guitars and everything that goes with them remained quiescent (oppressed?) during the majority of the 1990s. Until… my interest was rekindled in c.1997 on a day visit to Cardiff, Wales. Little did I know at the time that this would provide the catalyst for later events. While wandering the city streets, perusing the typical high street shopping facilities, I chanced upon Cranes Music Store, which has been in business since 1851 and is still going in Swansea (see: http://www.cranes.co.uk/). Looking around the shop, my attention was drawn to a fairly ordinary black 1988 Fender Telecaster for £400. To that point, bizarrely, I had never owned a Tele, so I was vulnerable to that worst of all situations… strong craving and overwhelming temptation. This was compounded because we were only there for the day, which meant that a snap decision had to be made. The combination of circumstances led to the inevitable acquisition of said craved Tele. At the time of writing, it is still a CRAVE Guitar.

1988 Fender Telecaster American Standard

I had been missing guitars and playing, and this single event rekindled my appetite for the instrument. Bear in mind that this was about 10 years before my thoughts and ideas would aggregate into something more tangible. However, the seed had been planted. No further guitar purchases took place at the time. I bought a Fender Princeton Chorus 2×10” solid-state amp, so that I could at least make quasi-musical noises again.

2000s:

The focus at the turn of the millennium, however, was not on vintage gear. During the early noughties, I bought a few diverse new guitars, amps and effects here and there, whatever took my fancy at the time. My mother left me some money, so I was able to purchase some brand new quality guitars including a 1999 Fender Stratocaster a 1998 Gibson Les Paul Standard DC, a 1999 Gibson SG Standard, a 2002 Gibson ES-335, and a 2002 Gibson Les Paul Standard. These are all great modern guitars. Three of those have now gone, which says something about the new versus old debate going on in my head. The trouble, if that’s the right word, was a lack of direction and no real motivation to change it for something else.

1999 Fender Stratocaster American Standard
2002 Gibson ES-335 Reissue TDC
1998 Gibson Les Paul Standard DC
2002 Gibson Les Paul Standard
1999 Gibson SG Standard

That is until… the defining moment came during a day out to Brighton in the summer of 2007. Wandering in North Laines, I saw a rather nice but not pristine black 1989 Gibson Les Paul Custom – perhaps the most iconic of all rock guitars and another model that I hadn’t previously owned. While it wasn’t (yet) vintage, I was attracted by the patina and it had just enough signs of use to give it ‘that’ look. I wasn’t actively searching for a guitar, so I didn’t know how much it should cost but it seemed quite reasonable compared to new prices at the time. It also looked way cooler than the shiny new ones on sale nearby. Like the Telecaster before it, a snap decision was required. The craving got the better of me again and consequently, like the Tele 10 years earlier, it came home with me. Also like the Tele, that Les Paul Custom is still a CRAVE Guitar.

1989 Gibson Les Paul Custom

Although it wasn’t a conscious decision to get into vintage guitars at the time, it triggered a curiosity in older instruments as well as the history behind older guitars, the wider music industry, and the socio-political context which it helped to influence. CRAVE (Cool & Rare American Vintage Electric) Guitars, which had been SO long in gestation, was thus delivered unto this world as a ‘thing’. While the concept didn’t have a discrete identity at the time, I was hooked and I haven’t looked back since. From that moment, most brand new instruments, while nice to look at, now hold little or no allure.

I started researching and buying some rather nice vintage guitars, some imported from America, when the exchange rate was much more favourable than it is now. As a direct result of the epiphany, the ambition for a vintage guitar business idea began growing. The name came first, being a play on words as well as the strong emotion that overcomes any attempt at futile resistance to guitar ownership. The first ‘logo’ was simple typography (see below), rather than properly designed. The first ‘catalogue’ from early 2008 comprised 27 guitars, all from the Fender and Gibson stables.

CRAVE Guitars Original Logo 2008

All guitar purchases since 2007 complied with the CRAVE Guitars simple criteria, i.e. Cool, Rare, American, Vintage and Electric. As far as possible, they are all original and undamaged/unmodified. The majority of those instruments now form the core of what is now CRAVE Guitars’ ‘collection’, ‘stock’ or whatever you want to call it. It was during this period that many of the guitars originating from the early 1960s guitars were secured. Thank heaven for that – I certainly couldn’t afford to buy them now. Likewise, none of the CRAVE Guitars’ fold can be classified as collector-grade instruments; I couldn’t (and still can’t) fund that level of quality.

It was about to turn into a realistic alternative to ‘working for the man’ when… two really, really bad things happened. The first was the global recession – the worst economic downturn in living memory. Completely oblivious to the impending financial crisis, I had been buying vintage guitars just as prices were reaching their peak. Bad idea! At the end of 2008, the bubble well and truly burst. The crash practically wiped out all hope of any sort of business start-up, asset management or return on investment. Market values for vintage guitars, arguably a discretionary ‘luxury’ good, plummeted pretty much overnight and are only now, albeit inconsistently, beginning to increase to or above 2008 levels. The second was a personal catastrophe of monumental proportions, from which I still haven’t recovered. I won’t go into detail but it was so profound and fundamental that it almost ended everything. Any idea of CRAVE Guitars becoming a viable business entity was firmly put on ice for another decade. Best laid plans, eh?

2010s:

The consequence of these coincidental calamities meant that the majority of guitars had to go into safe storage. Some didn’t make it to sanctuary and the rest had to be sold off. That early part of the decade was the worst time of my life. I never, ever want to relive or repeat that bleak period. My dreams were well and truly cast into the wilderness. Graffiti art credit: Banksy.

However, either by delusion or resilience, I wasn’t about to give up that easily. By 2014, I began to regain a modicum of, albeit wavering, hope and control. Guitar buying resumed modestly in 2014 after a 5-6-year break. In addition, the scope expanded into vintage amps and analogue effect pedals to complement the guitars. At first, the emphasis was, and to some extent still is, on affordability. CRAVE also started looking at some other important American brands beyond just Fender and Gibson, for instance, Danelectro, Epiphone, Gretsch, Guild, Ovation, Rickenbacker, Silvertone, etc.

Late 2014 and early 2015 saw the building of the CRAVE Guitars’ web site and its social media content. The name remained the same but a more visual approach was required, including some form of coherent brand identity to go with the moniker. The first ‘proper’ CRAVE logo came from experimentation with the name, several pieces of paper and a fat marker pen. It was coincidental that the letters could conveniently form a stylised outline of a Les Paul. Sorted! This crude attempt was then worked up to something a bit more presentable. A professional graphic designer friend doesn’t like my amateur attempts but I think it works well for the ‘brand’. One day, I would like it properly designed but keeping the spirit of the original. NB. Fun insight folks – the intentional ‘bumpiness’ of the lines making up the logo is intended to convey an impression of musical resonance and vibration.

Crave Guitars Logo 2014
CRAVE Guitars Logo 2015 to-date

Where we are today:

That pretty much brings the story up-to-date. The recent sell‑off of non-vintage and non-American gear, as a result of the relocation was an opportunity to refine the model further. The move is intended to provide a more stable basis on which to explore and build opportunity, everything being relative of course. While I consider it no mean achievement that CRAVE Guitars is still here at all, the last 10 years doesn’t demonstrate a great deal of success. I am not happy with the status quo (no not the band), so something has to change.

The baseline position at the time of writing is that CRAVE Guitars comprises a personal ‘assemblage’ of almost 50 guitars (95% of which are vintage), a small handful of vintage amps and over 30 vintage analogue effect pedals. The period covered (other than the 2 modern Gibsons), ranges from the late 1950s to the late 1980s.

→ See full list of featured instruments

→ See full list of featured effect pedals

→ See full list of featured amps

CRAVE Guitars’ 10th Anniversary:

To mark the 10th anniversary of CRAVE Guitars, I did something impulsive and appropriately retrospective. My first ‘serious’ guitar in the 1970s was a 1978 Fender Mustang in natural finish with a rosewood fingerboard. Within a year, I traded up to a ‘real’ 1977 Fender Stratocaster hardtail, a decision that I have long-regretted – not because the Strat is bad or the Mustang good – they were just different. In hindsight, I should have found a way to keep the Mustang.

To signify the events past and present, I paid way, way over market value on a very nice example of that same model Mustang. I did this purely for sentimental reasons and, like the Ovation Breadwinner mentioned in last month’s article, it will probably never turn a profit but, frankly, that wasn’t the point. In some way, it provides a fitting commemoration for the almost 40-year journey from the 1970s to now.

1978 Fender Mustang

→ See feature article on the 1978 Fender Mustang

What next for CRAVE Guitars?:

Well… now this is the BIG question and one that I am struggling with. I am not sure that I’ve learnt a great deal over the past 10 years to inform the future (other than desperate attempts at survival). What direction does CRAVE Guitars take and what happens to it from here? Now the relocation has taken place, it seems opportune to do some thinking and planning. The options appear fairly limited, including:

Do nothing – This is not a particularly satisfactory option. I like playing guitar but so what – is that really enough to warrant so many classic instruments? It certainly doesn’t do the guitars, effects and amps justice.

Establish a Private Collection – I don’t see my role as a collector, so it isn’t really a private guitar ‘collection’ per se. In any case, while collectable, these aren’t really investment-grade guitars. The guitars have precious little historical provenance to add value. As a matter of principle, I hate the idea of hording them away.

Form a business – CRAVE Guitars is not a business (at the moment). These are my babies and selling them as a dealer just isn’t me. Apart from that, I don’t have the ‘killer instinct’ to make it a viable, profitable business concern. Put simply, I’m rubbish at selling. There are also plenty of people in the country with better skills, experience and knowledge than I possess. I also don’t have the resources and I don’t have the appetite for fierce competition in a ruthless commercial (and volatile) vintage guitar market. I also don’t have the space to grow ‘it’ any further, so there is a finite limit to its size.

Exhibit the heritage – CRAVE Guitars doesn’t have sufficient historical merit, scope or scale to warrant establishing any sort of guitar museum and, let’s be honest, there has to be something really special to attract sufficient numbers. America has the ‘National Guitar Museum’, which is a travelling exhibition based in Florida and ‘Songbirds Guitar Museum’ in Tennessee. Sweden has ‘Guitar – The Museum’ serving Europe. Online, there is ‘Guitar Museum’, which is a sparsely populated webspace, so it exists only in a virtual way. The major manufacturers and major artists have museums but these aren’t the same thing. There are plenty of online resources (including CRAVE Guitars’) but it is very diverse and dispersed in nature.

As an observation, it seems incredible (scandalous?) to me that the UK does not have a local, regional or national institution protecting the country’s heritage and its enduring association with the guitar. WTF? There is clearly an opening here but it is probably way beyond my means and capacity. On the downside, there is something about passively cocooning guitars in glass cases that is an anathema to me. Guitars are meant to be played and heard but that ultimately that conflicts with the need for conservation. Alternatively, I believe that CRAVE Guitars’ instruments reflect sufficient heritage that their delights should be shared in some way (but not physically before I get inundated with offers to take them off my hands. Donations are, though, gratefully received).

Put them in storage – Heck, dire circumstances and the relocation dictate that some are still and will have to be in storage for the time being (which I also hate). It is my aim to provide safe, secure, environmentally appropriate space in which to keep them and have ready access to them so they can be used as the makers intended.

Sell the assets off and do something else instead – NOT happening! Period!

Any other ideas – ‘Answers on a postcard’ please to: info@craveguitars.co.uk. Any sensible advice greatly received.

What is my reaction to these options? I would prefer to explore what heritage conservation might mean, although I would need to find a way in which the ‘exhibits’ would be used, rather than locked away in cabinets in the traditional museum-like way. I would like to ‘rescue’ vintage instruments and ensure that they have a safe long-term future. To be honest and realistic, I really don’t think that this option is likely or possible, so it may have to become a commercial operation and I’ll have to learn how to detach myself from the labour of love that it’s been to-date. I’d also have to harden myself to the practical realities of creating and running a trading business. The lack of capital funding means that a physical location (i.e. a shop) is out of the question, so it would have to be a gradual conversion to some sort of virtual operation, probably building on what’s already in place. A great deal will depend on personal circumstances and, perhaps the blindingly obvious… money. Partnership may be an option and one that I haven’t really explored up to now.

Well that’s it for now. It took a considerable while to get here. It will be interesting to see what transpires from here on in. I wonder if CRAVE Guitars will exist long enough to reach its next decennary (and, yes, it is a genuine word, albeit an archaic one not in common use) in 2027. I hope you’ll accompany CRAVE Guitars through its next evolutionary step, whatever it may be.

In the meantime, I feel that it’s time to give that little old 1978 Fender Mustang a little TLC while singing “happy birthday”. I have a feeling that once it’s shipshape, it might well become a go-to guitar. I also hope to get back to doing some serious practising and playing. Until next time…

CRAVE Guitars ‘Quote of the Month’: “How on Earth do you get recognised for being an unrecognised genius?”

© 2017 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?
31 Mar 2017

March 2017 – A Time of Change

by | posted in: News, Observations | 0

Welcome to Spring 2017, guitar aficionados. If there is anyone out there keeping tabs on what’s going on at CRAVE Guitars and wondering about the lack of recent vintage purchases, here’s a quick (and short-ish) update.

I have mentioned previously about a necessary life-changing relocation and the fact that this has (hopefully only temporarily) curtailed my mission to bring you more Cool & Rare American Vintage Electric Guitars. You may have noticed that there has been a dearth of ‘new in’ articles and a consequent increase in ‘pretentious monologues’ (or as I prefer to call them, well-researched, in-depth, objective investigations) about guitar-related matters. This shift in emphasis was a conscious decision and directly related to the necessary change in circumstances.

Change is inevitable, positive change needs to be driven. As John F. Kennedy (1917-1963) wisely stated, “Change is the law of life. And those who look only to the past or present are certain to miss the future”. The time is fast approaching when it all happens, at long last. The whole process seems to have taken forever – over 12 months already. By mid-summer, the main move will have occurred (fingers crossed).

In the meantime, I am taking some heart breaking decisions and, to me at least, making some painful sacrifices. To be precise, that means selling guitar stuff. If you suffer the guitarist’s common malady of Gear Acquisition Syndrome (a.k.a. G.A.S.), you’ll understand exactly what I mean. I have accumulated quite a lot of musical equipment over the years and it’s time to be ruthless and rational about what a remodelled CRAVE Guitars actually needs, as well as to concentrate on what it will focus.

So… Why do it? Good question for a self-confessed gearhead. There are basically three factors involved here. The first is that permanent, full-time gainful employment has ceased for now, to become a full-time carer and to concentrate on the relocation. Whether this can be categorised as ‘early retirement’ or not is irrelevant – the fact is that there currently aren’t any sources of income to fund vintage guitar, amp or effect purchases. The second is that the cost of adapting a clunky, structurally unsound, damp (and very modest) old property in a poorly accessible location costs WAY more and takes WAY longer than envisaged. It has taken every last penny of available cash and it hasn’t even happened yet. The third is that the lifestyle change demands a much simpler way of living, away from the self‑seeking, avaricious intensity of the South East of England. I am not underestimating the cultural adaptation that will be required to all the above; it will be difficult and it has to be done. A positive mental attitude is most definitely needed.

So… what exactly does the sacrifice entail, you may ask? Well, at the moment, the vintage guitars, amps and effects are as safe as they can be. However, most of everything else sadly has to go. This means releasing CRAVE’s more modern guitars, non-American guitars, amps, studio gear, effects, accessories, etc. The home studio gear has largely gone and the modern effect pedals are all on their way. At the time of writing, quite a few items have departed for pastures new and there are still a few more bits and pieces to go, so the hurt continues for a while. If you are interested, keep an eye on the ‘For Sale’ section of the web site – all pre-owned items are auctioned on eBay UK and, because they have to go, there are some bargains to be had. https://www.craveguitars.co.uk/home/for-sale/

Sadly, four guitars have already gone (ouch!) and a fifth is likely to go imminently. Amongst those already re‑homed are the sunburst 1999 Fender Stratocaster American Standard and the cherry 1999 Gibson SG Standard. These are superb pro instruments and I’m very sad to see them go after many years of companionship but, as ‘they’ say, needs must. If you’ve looked at CRAVE Guitars’ website home page, these two have been front and centre for a long time, even though the guitars themselves are still a few years off vintage status – time for a new photo! Just for a change, I’m looking to use  CRAVE’s vintage 1962 Gretsch and 1964 Silvertone by Danelectro (see below).

I may try to hang onto a couple of modern guitars as reference instruments but the rest are either on their way or will be shortly. Most of the electronics don’t have such an emotional connection as the guitars but it is still very sad to see such a lot of good quality gear disappearing out of the door at relatively low values. I genuinely hope that the new owners are happy with their purchases.

If I have to excise any of the vintage gear due to circumstances, it will be immensely regrettable. That isn’t to say that I won’t sell some vintage items but the proceeds therefrom can, I hope, be reinvested in ‘new’ vintage equipment. CRAVE Guitars has to continue developing, otherwise it just becomes another stagnant private ‘collection’, the idea of which doesn’t excite or motivate me (in fact it’s one of my bugbears). I need to keep the faith and plough on, otherwise I won’t have anything to write about here!

One thing that struck me is the harsh economic reality of life. Costs of things one has to pay out for end up being far higher than one expects and the residual worth of things previously paid out for is far less than one thinks it should be. It may be stating the bleedin’ obvious that, as avid consumers, the level of depreciation between acquisition and disposal is severe but the recent experience has brought it into stark focus. Let’s just say that the cash flow sits firmly in the ‘outgoing’ column, not the ‘incoming’ one.

Exacerbating the value gap are the fees that eBay and PayPal rake in just for letting people sell stuff online. While I recognise that businesses have to make money, it is clear that everyone except me is making shedloads of lucre at every step along the way!

The economic laws of supply and demand mean that, at least in business terms, straightforward ownership isn’t financially sensible or maintainable without adequate income. Such is the price of an inadequately controlled hobby over a long period of time. It isn’t all bad though. There are positives, of course; one good thing is that we guitarists can get a great deal of enjoyment from using our equipment during the course of ownership. Thankfully, guitars (and everything that goes with them) can be usefully employed and are far more than static assets representing an ‘investment’ to be protected.

While on the subject of economic value, one thing that I’ve learned with vintage guitars is how long it takes before prices bottom out and values start appreciating again (if ever). Many vintage pieces remain in the economic doldrums for a period before regaining a higher proportion of their original retail price. The vintage market is by no means perfect; it only takes a relatively small number of wealthy collectors to intervene in the finite market and to drive prices to stupid levels (don’t get me started!). There is truth in the old adage that ‘if you’ve got money you can make money’. The converse is equally true, and sadly depressing, as I’m finding out. Although it isn’t yet consistent, some post‑recession vintage prices are beginning to escalate rapidly again which, if the trend becomes more predictable, signals the start of another unsatisfactory ‘boom and bust’ inflationary cycle.

Being didactic, if CRAVE Guitars is ever going to become a going concern, the business model needs objective re‑appraisal to ensure it can be adequately sustained as a viable entity. As a closet socialist, it goes against the grain to think about buying and selling to make a ‘profit’. As I’ve mentioned before, I have been a enthusiastic consumer but not necessarily a canny buyer and certainly a reluctantly ineffective seller. My recent experience provides tangible evidence of what I suspected all along. The culture of trading in sufficient volume to make a living is a complete mystery to me and it will be a difficult lesson to learn for someone who is not naturally inclined to commerce. I can safely say that CRAVE Guitars will never earn enough to live on but that has never been the point of the venture. However, whatever happens, I will have to stop losing money hand over fist.

You may well know that, to me, vintage guitars are not just soulless products to be pedalled without any sort of emotional connection with what they represent. I think that, if I harden my attitude to what are, after all, fundamentally just bits of wood, metal and plastic, it would take away a great deal of the beguiling nature of the instruments and the almost mystical vibes they generate.As Richard Branson (1950-), founder of the Virgin empire observes, “A business has to be involving, it has to be fun, and it has to exercise your creative instincts”.

Guitars, generally, have become an obsession which goes way beyond the core vintage ‘collection’. if you have ever taken a sneaky peak at CRAVE’s Twitter feed, for instance, you’ll see what I mean. I don’t anticipate that the underlying preoccupation that drives CRAVE Guitars ending any time soon.

The proceeds from the sale of the non-vintage music gear will, I hope, contribute towards the monumental costs of change. While it is sad to think that my non-vintage gear is going to fund the change in circumstance, at least the ‘career’ change is for an ethically and morally good cause. The other advantage of thinning things out is that there is less that has to be moved and less that space will be needed to home it all in the future.

It will take some time before the vintage items can be safely and securely relocated and I am looking forward to the time when the ‘family’ is readily to hand again. I am also looking forward to redesigning and updating the web content accordingly. Then, maybe, the mission to seek out more ‘Cool & Rare American Vintage Electric’ Guitars and bring them to your attention can be resumed. Bring it on – it can’t happen soon enough as far as I’m concerned.

As the likelihood of ‘new in’ articles remains a way off yet, next month may revert back to observational soliloquy, for which I apologise in advance. Until then… back to thinning out CRAVE’s non-vintage gear. Boohoo!

CRAVE Guitars ‘Quote of the Month’: “Wealth is not an absolute. It is what you do with what you’ve got, while you’ve got it that matters. Use it wisely”

© 2017 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?
27 Nov 2016

November 2016 – Where to Start with Vintage Guitars

by | posted in: Introduction, Observations, Opinion | 0

I was recently asked a simple question, “What’s so special about vintage guitars, why would I go for a vintage guitar over a modern one and where do I start?” Well now, that’s actually 3 questions but plainly very sensible ones to ask. As usual, they are not so easy to answer. Thus, another proverbial can of worms was duly opened.

Remember, I am no expert myself, just an enthusiastic amateur who’s obsession tends to cloud objective judgement. This is based on my own experiences, so a pinch of salt may be required. This article focuses specifically on vintage electric guitars. It doesn’t cover acoustic guitars or amps and effect pedals. Are you sitting comfortably, this is quite a long article?

What does the word vintage mean for guitars?

Let’s begin by taking a step further back and try to understand what is actually meant by ‘vintage’. Dictionaries refer to ‘vintage’ as something dating from the past that is valued as having enduring interest, importance or quality, or referring to the best characteristics of things made or done by a person or organisation. Well, that doesn’t necessarily help, especially as any interpretation of ‘past’ is relative and subjective.

Specifically focusing on electric guitars, there are essentially 2 camps; a) the purists who assert that ‘vintage’ only applies to the ‘golden era’ up to c.1965, and b) those who believe that any guitars over 25 years old are ‘vintage’. To me, neither of these adequately provides hard and fast rules for concluding vintage status.

While pre-1965 guitars are now clearly vintage according to both criteria, applying a fixed cut-off doesn’t really hold water in the long term, as the gap between 1965 and the present day continues to widen. Why 1965? Well, many American guitar manufacturers sold out to large, corporations in the 2nd half of the 1960s including Fender (1965 to CBS), Danelectro (1966 to MCA), Gretsch (1967 to Baldwin), and Gibson (1969 to ECL). Commentators point to corporate decision-making, to standardised manufacturing techniques, and to falling quality standards from the 1970s onwards. To me, this argument is difficult to justify, particularly as there are plenty of poor quality pre-1965 vintage guitars (as well as some great post-1965 ones). The purists have countless arguments to support their somewhat dogmatic position.

The 25-year ‘rule’ is also not particularly helpful. It is a bit of an arbitrary cut-off point because it presents us with a constantly moving target, albeit in one direction. Think about it a moment… what tangible differences justify one instrument to be defined as vintage and the next one off the production line as not vintage until the date cut-off catches up? Ultimately, many high, quality, mass produced guitars that the purists currently poor scorn upon will eventually become vintage, but isn’t that actually what happens anyway as the industry evolves over time? The opposition to the introduction of solid body guitars in the early 1950s, which have since become revered, is just one prime example. We shouldn’t confuse the picture by simply correlating quality and age – old=good, new=bad – it’s not that straightforward.

Perhaps obviously, there should be some shared understanding and guidance to help us all out. However, the above debate indicates that there is no black and white definition of ‘vintage’.

My personal feeling is that there are plenty of excellent vintage instruments up to and including the 1980s. After that, they become a bit, ‘samey’, while often also being much ‘better’. Common sense tells us that this view will also undoubtedly change as time marches on. There is a lot more to an instrument than whether it was CNC machined or not, take PRS electrics and Taylor acoustics for example. There are plenty of fine new sustainable tone woods to replace the ‘classic’ now-protected ones and they will all age. There are advances in the use of many materials and how they are used to improve guitar tone. Let’s face it; early instruments can be as ‘good’ or ‘bad’ as later ones in terms of construction and materials.

So, from a beginner’s point of view, the older a guitar is, the more likely it is to warrant being called vintage. No-one disputes that instruments from the 1960s and earlier are now vintage. The current ‘grey area’ is the 1970s and 1980s (and in the not too distant future, also the 1990s).

Why should I buy a vintage guitar?

Having confused rather than clarified from the outset, perhaps the obvious next point is to pose the question, “Why should I buy a vintage guitar?” If you don’t have a good answer to this simple prompt, keep asking the same question until you have something that makes sense. Some examples may help…

If the answer is, “To make money”, then I switch off. I am not the person to talk to about using guitars as a financial investment. My position on pecuniary speculation and Return on Investment (RoI) has oft been handed out with abandon, so I won’t labour the point again. Suffice to say that the idea of a vintage musical instrument as an investment for its own sake is an anathema to me. It squanders the whole point of what it was originally built to do, which is to play music. Exclusivity and rarity just make items more valuable to collectors aiming to protect their investments, thereby denying access to the rest of us to play them. I’m not denying that some vintage guitars are valuable, or rare, and even that some are worth it. What I am saying is that a short-term profit motive does not make a good entry point into the competitive vintage guitar marketplace.

If the answer is, “To play it”, that falls into the ‘not good enough’ category. There are plenty of modern instruments that are far better built, far more reliable and basically much better to play than many vintage instruments. Many new guitars can feel just as good to play, if not better than their ancestors and many manufacturers are working hard to close any gaps that remain. Many older guitars are just not up to playing live and some are too risky to take out and about. Let’s face it, all vintage instruments are irreplaceable. Once they’re gone, they’re gone, so a modern working instrument makes a lot more sense than gigging a vintage one.

If the answer is, “They are nice to look at”, that is also inadequate and is almost as bad as the ‘make money’ case. Buying to look at is just guitar porn. If you want something pristine, lightly aged or beaten up, there are plenty of outstanding new, ‘aged’ and ‘relic’ guitars that fit the aesthetic bill. When it comes to playing, they also have the advantage of modern manufacturing and reliability to boot. Some replicas even cost more than the vintage counterparts they are trying to reproduce – go figure! Age does not necessarily equal beauty.

If the answer is, “They sound great”, it also fails to convince. Modern analytical techniques and advances in technology mean that the differences between many vintage instruments and the many excellent modern examples are so subtle that, for most beginners, they will prove insignificant. Your playing technique and the rest of the signal chain are equally, if not more, important to what we actually hear. Being practical, in a live band or recording situation, the nuances are often obscured.

If the answer is, “Because they’re old”, then I’d say, “so what?” Mere age does not imply significance. There is something about the authentic patina brought about by both age and use that is hard (but not impossible) to replicate. There are a huge number of exceptional new instruments available, and intense price competition means that there are some very good deals to be found by hunting around, especially at the lower end of the market. At the other end of the scale, modern boutique and custom guitar makers make some wonderful guitars with amazing levels of quality to boot, Collings for example.

If the answer is all of the above, then go back and start again until you have a persuasive rationale for getting into vintage guitars. If you decide vintage isn’t your ‘thing’, then that’s a positive and at least you’ll know why. In that case, why not check out new or used instruments to appreciate what modern guitars can do and how they can easily fulfil the vast majority of needs, accepting that they aren’t ‘old’ and won’t be for a long time. Remember that the market value of new guitars will continue to depreciate for quite some time before bottoming out and eventually rising again. Buying a vintage guitar is the only short cut to the waiting time associated with age.

What is so special about vintage guitars?

It is too easy to trot out that old euphemism, “if I have to explain, you’ll never understand”. So, if you’re still intrigued, here is my answer to what is so special about vintage guitars.

The distinctiveness of vintage guitars is difficult to articulate, yet the differences are real. My personal fascination lies in the place that these instruments have in, particularly, American and European musical and social history. Although this will change, I don’t currently include Japan in this statement, as the Far East was mainly manufacturing products to meet western demand during this period, rather than being inculcated in the zeitgeist, i.e. they contributed to it without being part of it.

Vintage instruments somehow epitomise the popular culture of their era in a way that new instruments can easily evoke but of which they cannot be an integral part (until their time eventually comes). The value, playability, looks and sounds of an old instrument are quintessential elements of their decades-long journey to the current day. The artists associated with instruments (that were new at the time) and the classic recordings they made with them are all small pieces of the complex jigsaw.

To provide context, it helps to read up about the history of the guitar and popular music, the innovators and artists, the way the industry and markets evolved, and the way in which manufacturers’ various model lines adapted over time to reflect fashion and to meet musicians’ needs. Set that within the broader complicated and rapidly changing socio‑political and technological environment of the times, the enigma surrounding these simple bits of wood, metal and plastic really start to come alive.

There is something that appeals about the authentic scars of age and prolonged use that, while they can be reproduced, just don’t have any genuine history behind them. However, most guitars’ life stories are lost in the mists of time as guitars change hands, often many times over, so we can only wonder what happened to them since they left the factory all shiny and new. Their journey is as important as the eventual destination.

A good vintage guitar can be inspiring to play and will bring out a way of playing that a generic modern guitar struggles to do. I don’t have a good answer as to why this should be and there is no objective reason I can find for asserting it. Perhaps it is just wish fulfilment. I can only put it down to a number of elusive factors that combine to make it feel… ‘right’. Playing different vintage guitars bring out different stylistic traits as well, so it’s clearly not a single characteristic. Not necessarily better, just different.

Furthermore, current generations are just temporary stewards of these unique historical musical artefacts. Many guitars existed before we were born and many will survive long after we’ve passed. While we are here, I believe we have a moral and ethical obligation as guardians to conserve and share this important heritage for future generations.

If this explanation seems complete gobbledegook, hokum and hogwash, then vintage guitars are probably just passive objects as much as any other guitar. The search for a simple, compelling raison d’être for the joy of vintage guitar ownership goes on.

Where should I start?

OK, enough with the pretentious (but relevant) twaddle. If you are still reading this, I assume that you are still intent on exploring the wonderful world of ‘Cool & Rare American Vintage Electric’ guitars. So, being practical, where do you begin?

Right up front, I would suggest that it is a good idea to set your budget and stick to it. It is all too easy to get caught out by paying either more than you want or what something is worth. The next step may well be to decide what brands and models to investigate. There are plenty of options available, once you’ve selected the outcome you want to achieve. In the end, it all comes down to lucre and what you’re prepared to spend.

Whether you go for an acoustic or electric is fundamental. I’m not really qualified to cover the former so, assuming the latter, consider the type of basic construction, i.e. hollow, semi or solid body guitar. As a starter-for-ten, solid bodied guitars are simpler and more robust, and therefore comparatively easier to evaluate and look after.

The big two producers – Fender and Gibson – are often relatively safe places to start as there is a huge amount of reference material to inform choices and the names on the headstocks are, generally speaking, known quantities, which provides reassurance. Your choice between these two will depend very much on personal taste. If you’re into acoustics, Martin is also a safe bet. The downside is that the big brands also tend to attract premium prices, so they usually aren’t the cheapest options to start with. Finances may dictate whether to persevere or start looking elsewhere. You may hanker after a vintage Gretsch or Rickenbacker although, for various reasons, caution is advised to avoid potential mistakes, so they may not make the best ‘first purchase’.

Buying guitars built in the ‘grey area’ (1970s and 1980s) mentioned above can be a good bet. After a relatively modest initial outlay, the guitar’s value probably won’t go down much further, if at all. In fact, guitars from this period will be on the verge of starting to increase in value, which may enable you to start modestly and ‘trade up’ to get what you really want. The vintage guitar market is now quite mature, so if a ‘bargain’ seems too good to be true, it probably is, and it is probably sensible to resist temptation. If you are face to face with a seller, try haggling – as long as you are not in a hurry and are prepared to walk away, there is no harm in asking, and there are often some good deals waiting to be struck that keep everyone happy.

While a Fender Stratocaster or Telecaster from the ‘golden era’ (1950s and 1960s) are likely to be out of the reach of most, mid-price Jaguars, Jazzmasters, or ‘budget’ Musicmasters and Mustangs have many of the same characteristics without the associated eye‑watering price tags. The same applies to early Gibson Les Pauls, ES‑335s and Flying Vs, which attract premium prices, while ES-330s, Explorers, Firebirds and SGs occupy middle ground, and ‘budget’ models like the Melody Maker, LS-6 and S-1 reside at the lower end of the market.

There is SO much more to owning vintage guitars than face value and/or model snobbery. A pre-CBS Fender Strat is worth 10 times the market value of an equivalent Mustang. It may be your dream instrument but is it really 10 times better as a musical instrument and therefore is it really justifiable as a vintage newbie purchase? It’s clearly the buyer’s prerogative but I would suggest dipping your toe in the water and see whether you like it first. If you then decide it’s not for you, something inexpensive also provides a relatively easy exit route. There are plenty of positives about the cheaper end of the vintage market, despite the purists’ unerring disdain. There are some fantastic ‘alternative’ guitars out there and they can be great fun to own and to buy at reasonable prices.

Don’t be fooled into following the crowd – stick to your own preferences. If your tastes are more eclectic or esoteric than the traditional stalwards, you may want to ‘stray off the beaten track’ and ‘take a walk on the wild side’. Depending on how finely honed your intuition, ‘a bit of what you fancy’ is often a good guide and take it from there. There are plenty of very cool vintage European brands, (e.g. Vox, Burns, Hofner) or Far Eastern ones (e.g. Yamaha, Ibanez, Teisco) from which to choose. There are also plenty of cool American brands to consider (e.g. Epiphone, Danelectro, National, Supro, Kay, Harmony, Guild, Ovation, Music Man). Many of these brands are now well documented and can provide low cost access to quirky ‘old school’ Americana.

After 40+ years, be prepared for variable and unpredictable reliability, such as switches, pots, tuners, wiring, pickups, etc. Originality and good condition are big pluses if you can afford them. While ‘museum’ or ‘collector’ grade guitars are lovely to look at (much in the same way new guitars), they can be intimidating to play, just in case their ‘perfection’ is ruined forever. In addition, untouched ‘closet’ guitars are relatively rare and can be prohibitively expensive. As a general rule, good guitars get played. If you like the relic look and/or want something pragmatic, then unoriginal or battered ‘players’ guitars can be great to use without being scared of adding the odd nick or scratch. To start with, I would avoid badly damaged, badly repaired or ‘project’ guitars, as these generally aren’t good examples of their type and they may be more problematic than they are worth. Refinishes and unoriginal parts lower a guitar’s collectable value, although they may make what you’re looking for more affordable, as long as you accept that it will not realise a high value when you come to sell it. You pays your money…

Do your research

In all circumstances, it pays to be diligent. Do your research first and read as much as you can from credible sources, so you know what you’re looking at and understand what you’re buying into. Scrutinize and filter carefully what’s on the Internet as it can be pretty unreliable on the subject (especially highly opinionated forums). It is wise to check out a variety of sources, look for corroboration between them and then reach your own conclusions. Going old tech, i.e. books, can help. Respected vVintage guitar ‘bibles’ include:

  • ‘Gruhn’s Guide to Vintage Guitars : An Identification for American Fretted Instruments’ by George Gruhn and Walter Carter
  • ‘The Official Vintage Guitar Magazine Price Guide’ by Alan Greenwood & Gil Hembree (values are in $USD, so work on a 1:1 ratio)
  • ‘Guitar Identification: A Reference For Dating Guitars Made by Fender Gibson Gretsch and Martin’ by A.R. Duchossoir.

None of these are light reading; however they do provide essential reference material to help inform sound buying decisions. Even these are not infallible though. Coffee table tomes are nice to look at but are generally not comprehensive enough, as recently evidenced by a ‘history’ book that failed to spotlight the historic significance of several milestone guitars including, the Gibson ES-150, the Gretsch 6120 and the Fender Jaguar.

Determining the date of vintage instruments can be problematic. The above references can assist, so can manufacturers’ web sites and many other online resources. Again, the advice is to check and then double check before relying on them too much. If you can’t date an instrument definitively, it may be best to go elsewhere. Avoid any instruments where the serial number has been removed or obscured. The topic of vintage guitar dating is complex and well beyond the scope of this article.

Until you have experience, I don’t advise buying without seeing and, more importantly, trying, feeling and hearing the actual guitar you are interested in. Even experts can get caught out, so buying unseen (e.g. on auction sites) can be a minefield, even when the seller provides nice photographs. To begin with, if you can afford it, buy from a reputable source and buy from your own country to avoid potential transport and import issues.

Be aware that there are fakes out there, although these have tended to be for higher value instruments, as that’s where the big money is. The old adage of caveat emptor (buyer beware) applies! If you have any doubts at all, resist temptation and walk away. There will always be others – be patient. Yes, you may miss out on something special but it isn’t the end of the world. ‘If in doubt, leave it out’.

The risk of diving headlong into the subject unprepared is to be disappointed, to lose faith in the idea and miss out on some inspirational experiences. After looking and trying a few guitars out, you’ll quickly get a feel for what grabs you and what to look for. The ‘fatal attraction’ symptom goes a long way to opening the doors to vintage guitar ownership, whether it’s for a personal guitar collection or to buy and sell. Remember a vintage guitar collection is simply a case of owning more than one! As knowledge and experience grows, your horizons will (probably) expand naturally and you can manage risks with confidence.

Owning your vintage guitar

Once you’ve bought your vintage guitar, it is vital to look after it, which is pretty obvious but very often overlooked. First up, keep it secure from undesirables who want your precious instrument and who are not afraid to take it off your hands for nothing. I hate insurance. However, it would be irresponsible not to mention that you should consider going to a specialist insurer to cover your irreplaceable gem in case the unthinkable happens. Use a good guitar case, stand or hanger and avoid environmental extremes of temperature, relative humidity, dust and direct sunlight. Keep it clean and avoid using chemicals.

One of the best ways of maintaining vintage instruments in good condition is actually to play them regularly. I would also recommend getting to know a reliable and dependable guitar tech to check it over and commission them to deal with any maintenance issues as they arise. Even if you have some basic know-how, it is particularly important to have an expert who really knows their craft and is willing to help you look after it.

Selling on

At some point, you may wish to sell your prized possession. Be realistic about what someone is prepared to pay for it – it is easy to fall into the trap of thinking it’s worth a lot more than it actually is. Internet prices tend to overinflate value hoping the inexperienced will take the bait. Dealers, on the other hand, will devalue and offer 20‑30% less than market value in order to make a profit. Some dealers will sell for you on concession but, again, they will take their 20-30% cut (at least). Private selling is now less common, so be prepared to wait for the right buyer. Specialist musical instrument auction houses exist but beware their somewhat punitive commission rates.

Finally…

Of course, if money is no object, then a sunburst 1959 Les Paul Standard remains the pinnacle of vintage desirability, especially if it has documented provenance. Expect a stratospheric price tag to go with it though. Heck, I wouldn’t turn one down if one came my way (hint, Mr Claus).

In summary, there are no hard and fast rules. What you do with your cash is entirely up to you. I will leave it to others to judge the value of this article, however, I genuinely hope that it helps a bit – take from it what you will.

A final word of warning though; beware, owning vintage guitars can be highly addictive and bank-breaking. However, in my view, it is all worth it. Just be careful out there. In the meantime, I’m off to plink one of my planks. Until next time…

CRAVE Guitars ‘Music Quote of the Month’: “Music is an art, not a commodity. It is the people who sell it to the masses that cannot tell the difference.”

© 2016 CRAVE Guitars – Love Vintage Guitars.

 ← Return to ‘Musings’ page

Like it? Why not share it?
28 May 2016

May 2016 – New Stuff At CRAVE Guitars

by | posted in: News | 0

It’s been a few months now since I covered any new CRAVE Guitars’ acquisitions and it suddenly occurred to me that quite a bit has happened since Christmas 2015. So, I’ve put arrogant, pretentious rhetoric on hold in order to get back to the core of what CRAVE Guitars is all about.

In March 2016, I mentioned that I am on a new mission, money permitting, to accumulate a range of classic vintage guitar effect pedals. Progress to-date has largely fallen into 3 categories:

  1. Purchasing a range of cool vintage effect pedals
  2. Recovering a number of older effects from storage that I bought new in the 1970s
  3. Getting out a horde of modern effects, some of which will probably have to go over coming weeks/months to fund further vintage purchases

Only some of the ‘new’ vintage pedals have made it to the web site at the time of writing – I am in the fortunate position of having a backlog of features and galleries to update, so keep an eye open to see newly published material. There is too much to cover in this article, so take a peek at the ‘Amps & Effects’ features pages (click here to see feature menu page…). These particular pedals have been selected because they were the tools of the trade in the late ‘70s and early ‘80s, so represent familiar territory for me.

In summary, cool vintage stomp boxes that are ‘new in’ since March 2016 include:

  • 1981 BOSS DS-1 Distortion
  • 1985 BOSS OC-2 Octave
  • 1976 Electro-Harmonix Doctor Q (envelope follower)
  • 1982 Ibanez AD9 Analog Delay
  • 1984 Ibanez CS9 Stereo Chorus
  • 1981 Ibanez FL301-DX Flanger
  • 1982 Ibanez FL9 Flanger
  • 1981 Ibanez TS9 Tube Screamer (overdrive)
  • 1980 Jen Cry Baby Super (wah)
  • 1977 MXR Blue Box (octave/fuzz)
  • 1975 MXR Distortion +
  • 1977 MXR Phase 90
Vintage Effects x 8

My personal collection of cool vintage Electro-Harmonix effect pedals includes:

  • 1977 Electro-Harmonix Big Muff Pi (fuzz)
  • 1977 Electro-Harmonix Deluxe Memory Man (echo)
  • 1977 Electro-Harmonix Electric Mistress (flanger)
  • 1976 Electro-Harmonix LPB-2 (clean boost)
  • 1977 Electro-Harmonix Small Stone (phase)
Vintage E-H Effects x 5
 

Now, if you know about or even have a passing interest in vintage effect pedals, that’s quite an impressive little haul for starters, albeit from the mainstream brands. Like all CRAVE Guitars items, they will be used (but not, I hasten to add, all at the same time!).

That’s not all folks… Despite my declared ‘temporary change of direction’ I haven’t completely been able to resist the temptation to purchase more vintage guitars. There have been 2 new purchases that are complete polar opposites in almost every respect. Both are great instruments; they are just very, very different from each other. Both guitars have features written on them, so I won’t repeat the detail here, other than to say that they are fabulous additions to the CRAVE Guitars stable. Go take a deeper look:

1962 Gretsch 6120 Chet Atkins
1981 Gibson RD Artist

The time is coming for a bit of rationalisation at CRAVE. If anyone out there is interested in purchasing any ‘modern’ (i.e. post-1990) guitars, amps and/or effects pedals, let me know and I’ll send a list. I’m not a dealer, so I’m not sure about how much they are worth, so I might just let eBay auctions determine the market value (time permitting). They deserve more use than they’re getting now.

While the stomp box mission is in full swing, I am also mildly interested in getting hold of another vintage valve amp. I’m thinking of one of the smaller ‘student’ models from Fender (black or silver face), probably from the late 1960s up to the mid‑1970s – perhaps an all-original Champ, Vibro Champ or a Princeton in good used condition (and UK 240V).

Guitar-wise, I am also browsing the Internet for some cost-effective vintage guitars to fill gaps, for instance a 1970s Fender Bronco, a 1960s Danelectro and a 3rd generation Melody Maker from the mid-1960s (these are the ‘ugly duckling’ ones with the amateur-looking pointy cutaways, i.e. not the pretty 2nd generation or the SG-like 4th generation ones). I am more pernickety about guitars and these have to be in good-to-excellent original condition (i.e. no refinishes, major modifications or breakages).

I simply can’t afford ambitious ‘retail’ vintage prices for guitars, amps and effects, but we may be able to find common ground around realistic values. What may come my way will be shared on the site.

That’s more than enough for now. Stay cool. Until next time…

CRAVE Guitars ‘Music Quote of the Month’: “Music is not necessarily the only road to true enlightenment. According to many musicians that’s also what sex and drugs are for.”

© 2016 CRAVE Guitars – Love Vintage Guitars.

← Return to ‘Musings’ page

Like it? Why not share it?